Model NO.: HN-AD150
Screwdriver Startup Mode: Hand press
Condition: New
Customized: Customized
Chuck Capacity: 3/8"
Chuck Size: 10mm
Spindle Thread: 3/8"-24unf
Free Speed: 2500rpm
Length: 175mm
Weight: 0.91kgs
Air Consumption: 4cfm
Trademark: HUNEER
Transport Package: Carton Box
Origin: Zhejiang, China
HS Code: 84671100
Name: Reversible Air DrillItem No.: HN-AD150
Features:
Casting iron cylinder;
Drill chuck is processed by advanced heat treatment;
Wear resistance;
Strong steady;
Gravity die casting molding housing;
prominent air tightness;
Rear exhaust;
Special surface treatment;
Comfortable grip;
Suitable for drill and tap of steel plate, aluminum plate, board, IC plate and plastic plate.
Specification:
Â
Item No. | Â Length | Â Free Speed | Â Chuck Capacity | Chuck Size | Â Air Inlet | Air Hose | Â N.W. |
HN-AD150 | Â 175mm | Â 2500r.p.m | Â Â Â 3/8" | Â 10mm | Â 1/4" | Â Â 3/8" | Â 0.91kgs |
Image Details:
Connectivity:
Air Supply & Pressure
• Always use a clean and dry air supply to operate the tool at 90psi.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
• Use a fitting air hose for connection between the compressor & tools.
• Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
• Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
injury.
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
• Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
Â
FAQ:
1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.
2.Q: About your products, could you do it OEM?
 A: Yes, OEM is workable for us, but with MOQ.
3.Q: Have you guarantee for your products?
 A: Normally we provide half year guarantee with spare parts supply.
4.Q: Do you also provide spare parts of pneumatic tools?Â
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.
6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.
7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.
Â
Living Room Furniture,Dresser Drawer,Aluminum Dresser Drawer,Storage Boxes Bins
Changzhou Offistyle Furniture Co., Ltd. , https://www.offistylefurniture.com