The surface treatment process of aluminum ceilings is mainly coating, roller coating and anodizing. The implementation methods and advantages of these processes are different. The film is a physical process. A layer of film aluminum sheet is formed by high temperature and high pressure. The roller coating is an international standard aluminum material hot-strength high quality aluminum alloy sheet that begins with a 3 character. The coating process is formed by press-bonding; anodizing is the use of a metal or alloy part as the anode, and an oxide film is formed on the surface by electrolysis. The following small series for everyone to introduce aluminum ceiling installation and aluminum ceiling category.
Aluminum ceiling installation
1, according to the same level installed aluminum trim angle;
2. Lift the boom and light steel keel at a suitable distance. The spacing between booms is less than or equal to 1.2 meters. The spacing between light steel keel is 1.2 meters.
3, the pre-mounted on the triangle keel hanging pieces together with the triangular keel and light steel keel in a vertical direction by plate spacing, then adjust the level;
4. Push the two sides of the square plate into the triangular keel joints in parallel. After loading, straighten the straight ends of the two sides of the square plate and then pull the straight lines and press the plates one by one. After each row of buckles, adjust one time to ensure the flatness of the plate. , Board seams are vertical (note that the direction of the square board with a small pit is to insert a triangular keel seam);
5. Wear gloves when pinching the board. If you accidentally leave a dirty mark on the board, clean it with clean water. Do not remove the protective film during installation.
6. The purchased aluminum ceilings and supporting keels and fittings should meet the product quality requirements and must not be bent and deformed;
7. During transportation and stacking, aluminum ceilings should be kept flat and cannot be pressed, and high temperature and harmful substances should be avoided;
8, the keel installation is smooth, the spacing deviation should be controlled within the allowable range of 1.5 meters;
9, when installing aluminum ceiling, if the size of the deviation should be adjusted after the first insert in order, not hard plug, to prevent deformation;
10, large lamps, exhaust fans and other things should be done keel fixed, should not be placed directly on the aluminum ceiling.
Aluminum ceilings
1, grille ceiling
The grille ceiling combination is flexible: The aluminum grille is combined with the aluminum frame. After installation, it has unique design and novelty features. The main and sub-bone of the grille ceiling are inward-folded to enhance the firmness of the bones. The bones can be pruned on site to meet the requirements of different sites. The trimmed bones can still be used in conjunction with each other. The port structure of the main bone and the sub-bone is elegant so that the connection between the bones can be seamless.
2, aluminum Fangtong
Aluminum is commonly used in hidden crowded public places with a large number of people. It is convenient for air circulation, exhaust, and heat dissipation. It can evenly distribute light and make the entire space spacious and bright. Aluminum Fangtong is widely used in subways, high-speed rail stations, railway stations, airports, large-scale shopping malls, passages, leisure venues, public toilets, building exterior walls and other open places. Aluminum square pass is a kind of open-type long hanging plate, which is composed of aluminum pass through distance. A long board was used to hang on the keel installation test, and the keel system was hidden in the visual sense. Aluminium-pass ceiling vertical coherent coarse ambassador, appearance simple and elegant with the style of the times.
3, aluminum buckle board
The structure of the ceiling of the aluminum buckle plate is tight and the waterproof is strong: the installation structure is windproof special keel snap-type structure, strong tightness, no gaps, strong water resistance; high deep keel, strong windproof performance: there is a fixed die on the deep keel The number of teeth, metal ceiling for the wind resistance of each card teeth are designed with a windproof card code, suitable for outdoor decoration, high security, can be suitable for outdoor devices and can be assembled and used flexibly, to provide designers with a broader concept of space.
4, aluminum hanging piece
The aluminum hanging piece has an open field of vision, making people extremely open-minded, ventilated, breathable, with clear lines and distinct layers. The installation effect of aluminum hanging pieces is simple and clear, it is the style of modern art. Aluminum coupons are diversified in color. Wood grain is the most popular color nowadays. It is also a color that highly mimics the natural atmosphere, allowing people to feel the existence of nature in exhausted work.
5, hook plate
Hook-up board is very strong: aluminum ceiling metal ceiling installation structure, simple and stable, ceiling hidden, the upper 38 main bones and the lower triangular keel with a solid well-shaped structure, easy installation and disassembly, the table hook aluminum sheet The board surface is very smooth, and the stitching between the board and the parcel is carried out in an orderly manner by the keel. The unique hook design of the board edge can well control the activity between the board and the board, thus ensuring the board and the board. The gap between the plates is more tight and flat.
Aluminum ceiling purchase considerations
First look at the material of the door and window. The aluminum profiles, thicknesses, strengths and oxide films used in high-quality aluminum alloy doors and windows are all in compliance with relevant national standards. The wall thickness should be 1.2mm or more, and the thickness of the oxide film should be 10 microns. If it exceeds the national standard, it even meets European standards
The second look at the processing of doors and windows. High-quality aluminum alloy doors and windows, fine processing, installation stress, good sealing performance, switch freely. Poor aluminum alloy doors and windows, materials and specifications are not up to standard, and processing is also uneven, poor sealing performance, not only leakage of air leakage, but also in the case of strong winds and external forces are prone to glass cracking and other phenomena , causing the glass to fall or fall off.
The third look at the appearance of doors and windows. The appearance of doors and windows is also a key link. Aluminum alloy doors and windows have an artificial oxide film and are colored to form a composite film. This composite film is not only corrosion-resistant, wear-resistant, but also has a certain fire protection function. The gloss is extremely high. To compare as much as possible, try to choose the products of the regular aluminum alloy door and window manufacturers, select and process precision, accurate, open and close light and flexible, no noise, and elegant decorative products.
Fourth look at the price of doors and windows. Under normal circumstances, high-quality aluminum alloy doors and windows due to high production costs, the price is about 30% higher than inferior aluminum alloy doors and windows. Some aluminum alloy doors and windows with a thickness of only 0.6-0.8 mm aluminum profile, the tensile strength and yield strength are much lower than the relevant national standards, the use is very unsafe, and it must not be ignored because of the cheapness of the greed and neglected its own safety factors. .
The fifth look at the performance of the doors and windows. Aluminum alloy doors and windows are usually assessed for the following main properties: strength, air tightness, watertightness, opening and closing force, sound insulation, heat insulation, durability of nylon guide wheels, and durability of opening and closing locks.
Editor's summary: The categories of aluminum ceiling installation and aluminum ceiling are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Heating Installation Renovation Installation Hydroelectric Installation Construction Installation Aluminum Ceiling Installation
PVC high glossy wooden panel/ UV coating pvc wooden panel is easy to cut, saw nail, stick. It has a smooth finish one side that can be taped and jointed ready for decoration including wallpapering, painting, texture coat and veneer, and a rougher side for tiling. Our PVC Wooden Panel is new materials for wall decoration. Such as pvc wall board.
Our UV coating pvc wooden panell is widely used in interior decoration like hotel, restaurant, laboratory, bathroom, home, etc.
It is radiation free, water-proof, fire-proof, wear resistance (green decoration material).
Feature
1. Fireproof
PVC wooden panel(wooden pvc panel) is non-flammable and conforms to the national grade B1 standard (GB8624-2012 Grade B1).
2. Water-proofing and moisture-proofing
The product is allowed to long-term expose to moist environment.
3. Environment
PVC interior wooden panel does not contain any organic solvents, formaldehyde, asbestos, oils or other toxic substances that can have a negative impact on the environment and waterways.
|
Specification size |
1220mm*2440mm |
|
Surface Finish |
High UV coating |
|
Thickness |
1-9mm |
|
Color |
Customized colors |
|
Hardness |
3H-6H |
|
Materials |
PVC |
|
Type |
Interior pvc wooden panel |
|
Installation |
Easy installation |
|
Life Span |
15 years |
|
Place of original |
China |
PVC Wooden Panel
Pvc High Glossy Wooden Panel,Uv pvc Coating Wooden Panel ,Pvc Wooden Wall Paneling ,Pvc Solid Wooden Panel
Shandong Kingmarble Decoration Materials Co.,Ltd , https://www.pvcpanel.de