Foam glass is a new type of insulation made of glass (natural glass, artificial glass). The product has the characteristics of low thermal conductivity, low water absorption, high strength, light weight, fireproof, waterproof, sound absorption, wide application temperature, etc., and workers can assemble it into walls or other parts of buildings such as houses on the construction site. Very convenient. A house constructed of foam glass has a wall that is as insulative as a brick wall reinforced with a layer of 15 cm thick polystyrene. Not only can this wall be plastered, but it can also be painted. After the product is promoted in the construction industry, its market prospects will be great.
Key points for construction of foam glass exterior insulation system
1, the order of operation of the wall
When the exterior wall is covered with foam glass, the surface layer of the wall should be immersed with no water, and the surface of the foamed glass should be cleaned with compressed air or a brush to remove the surface ash, and scraped with a toothed trowel on the back and sides. About 2mm thick bonding mortar, while scraping 2mm thick bonding mortar on the wall surface, immediately stick the foam glass on the wall surface, squeeze it tightly with the surrounding patch, and then gently tap it with a rubber hammer. Make it bond firmly, and stick the block to the block. When the excess mortar is squeezed out, it should be scraped off immediately.
2, paving installation methods
When paving, it is generally laid from top to bottom and horizontally in the horizontal direction. (It can also be from bottom to top. When the last part is under construction, in order to avoid falling movement, support should be added to make it stick and not slippery). The seams should be horizontally aligned between each layer, and the vertical direction should be staggered. When it is not possible to paste the whole piece, it is necessary to measure the size in advance, and cut it in the desired size on the spot, and do not cut it at will.
3. Provisions for installing nails on the outer wall surface
For high-rise buildings with a wall height of more than 4m and a floor height of more than 20m, fixed nails should be added. The spacing between the nails should be about 1.2m. The fixing point should be at the corner of the foam glass block and the anchoring depth of the wall must be 30mm.
4. Time requirements for the construction of the overcoat
When the exterior wall foam glass cover layer is applied, it should be applied after the foam glass is pasted for 2 days before the cover layer can be applied. Before the construction, the foamed glass insulation layer should be inspected. The flatness should be more than 2mm, and the gap between the plates should not be smooth. It should be done when it is full. When facing the surface coating or pasting the tile, after the surface layer mortar is hardened, the decorative layer construction is generally carried out in 1-2 days.
5, the paving method of the grid cloth
Remove the surface of the foamed glass insulation layer and remove it with a small amount of water, then wipe the surface mortar 3mm. After smearing, the mesh cloth is laid, and the mesh cloth is pressed into the mortar with a trowel. The mesh cloths are overlapped by about 3 mm, and the mesh cloth should be smooth, not wrinkled, delaminated, and after the mortar is initially set. Then wipe the cover layer 2mm and smooth, compact and calender. If the wall design is not laid with mesh cloth, additional reinforced mesh cloth shall be added at the corner of the wall and the corner of the wall at the corner of the wall, about 100mm on each side.
The bathroom counter top Basin, as a kind of basin provide to clean face or hands. On stage, basin exterior could show completely, so you can decorate it with your thought in the bathroom better. Second, counter top basins also reveal individual character more, and installation is more convenient.Top Quality Humanized Design Above Counter Basin
Wash Basin 185mm,Corner Vanity Sink,Shallow Bathroom Vanity,Ceramic Sanitary Ware,Above Counter Basin,Ceramic Sink Basin,Tabletop Tap Sink,Ceramic Sanitary Ware,Above Counter Basin,Ceramic Sink Basin,Tabletop Tap Sink,Shallow Bathroom Vanity,Above Basin Counter,etc.
Vessel Sink Vanity Top,Ceramic Table Top Wash Basin,Above Counter Ceramic Basin,Ceramic Sinks Online,Ceramic Oval Basin,New Modern Bathroom Face Basin,Bathroom Wash Basins,Ceramic Sinks B&q,Ceramic Corner Basin
GUANGDONG ZHIJIE SANITARY WARE CO., LTD. , https://www.zhijiesanitary.com