Armored Thermocouple Installation Instructions

Armored thermocouples offer many advantages such as bendability, high pressure resistance, fast thermal response time, and robustness. Like industrial assembly thermocouples, they are used as temperature-measuring sensors and are usually associated with display instruments, recording meters, and electronic regulators. It can also be used as a thermoelement of a fabricated thermocouple. It can directly measure the temperature of liquids, steam and its gas medium and solid surface in the range of 0°C~800°C in various production processes. Compared with fabricated thermocouples, armored thermocouples offer advantages such as bendability, high pressure resistance, short thermal response time, and durability.

Armored thermocouple precautions:

1. The installation height of the briquetting must be the same, usually 150~200mm above the level;

2. The welding of the briquette requires three-side spot welding. The thermocouple insertion port should not be spot welded. The side spot welding should be careful not to stop the stop screw to weld.

3, the pipe wall temperature should be installed symmetrically up and down;

4, armored thermocouple must be inserted in place, stop the screw tightly in place;

5, armored thermocouple leads to the proposed use of small box;

6, armored thermocouple fixed stainless steel wire must be used to replace;

7, armored thermocouple and furnace wall interface must be bandaged, and then threaded into the homemade protective tube leads;

8, in order to prevent the settlement of the boiler, it is recommended to use a transition junction box, and then use the compensation lead to connect to the front device;

9. The bridge or protection tube of the furnace wall and front device should not be closed type. To prevent the high heat flow from directly entering the front device and damaging the components inside (Tianjin Power Construction did not pay attention, resulting in the front device. damage);

10, the position of the front device can not be too far, otherwise the length of the thermocouple is not enough;

Armored thermocouple

200W LED Grow Light

Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.

Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.

From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.

Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.

200W Led Grow Light,Best Grow Lights,Grow Lights,Fluorescent Grow Lights

Feton Corporation , https://www.ultraplantleds.com