After communicating with the designer, he entered the budget stage of the budget room and brought the designer to the new house to conduct on-site measurement. The length, width and height of each room in the house were measured, and the positions of the doors, windows, and heating were measured one by one, but Note that the current status of the house has an impact on the quotation. At the same time, the process of measuring the volume is also a process of on-site communication with the designer. The designer can make some reasonable suggestions based on the situation on the ground to communicate and make the integrity of future design plans. Added.
First look at the precautions:
Ground: Regardless of the cement plaster or the floor of the floor tile, attention must be paid to its flatness, including the flatness of the single rooms and the floor of each room. The degree of flatness has a great influence on the price of decoration construction such as paving tiles or flooring.
Wall: The flatness of the wall must be measured from three aspects. The solid angle formed between the two walls and the ground or the top surface should be straight. The angle between the two walls should be vertical. The single wall should be flat and free from undulations. No bending. These three aspects are related to the construction unit price of the floor covering and wall decoration.
Top: The flatness can refer to the ground requirements. Light tests can be used to see if there is a large shadow to clarify its flatness.
Doors and windows: Mainly check whether the horizontal and vertical joints between the door and window fan and the cabinet are even and dense.
Kitchen and toilet: Pay attention to whether the floor is tilted toward the floor drain; how waterproof is the floor surface; waterproofing around the ground pipes (water, coal, and warm water pipes); whether there are local cracks, water marks and mildew on the wall or the top; Whether there is a drip, whether the water is unobstructed, and whether the location of the existing washbasin, toilet, bath, vegetable-washing area, and cooktop is reasonable.
A. The tools for measuring rooms
Tape measure, ruler, camera, paper, pen (preferably two colors)
1. All measurements are based on a tape measure. The measurement range includes the height, width and height of walls in each room, the thickness of walls and beams, the height of doors and windows, and the height from the wall. Therefore, we must bring enough measuring tape, usually more than 5 meters.
2. It's best to print out a flat floor plan so that it is clearer. If you don't have one, you'll have to paint it. You should bring one more floor plan, just in case.
Second, the specific measurement method
A. Start from the entrance door, turn around, and finally return to the other side of the entrance door.
B. When measuring the length and height of a specific room with a tape measure, the length shall be measured closely to the ground, and the height shall be measured close to the corner of the wall.
C. All the dimensions are segmented, divided into several pieces like the geometry we have learned, and the data are recorded at any time (for example, there is a window in the middle of the wall, the distance between the first corner and the window, and the width of the window. , And then measure the distance from the window to the corner of the other side. Can you understand this?
D. The window should mark the "high ground" and "height", and the window should record the depth.
E, pillars, door openings, etc. are handled in the same way as windows. They are also separated by data, so that the exact position is known after the floor plan comes out.
F, kitchen and toilet to the toilet into the water, floor drain, basin water position marked out in the floor plan, the distance between the toilet center from the wall, which involves buying the toilet pit distance problem; there is the beam position.
G. There is no special situation. The floor height is basically certain. Finding two places to measure the floor height can be average.
H. After finishing, go back and copy two copies in time to prepare for any unexpected events.
I. If you let different companies quotations, you don't have to go to each room to measure the amount of money, and the province will toss yourself back and forth.
Third, the end of the amount of housing
In accordance with the above procedure, basically the amount of room has been completed, and it took two hours from entering the room to the end of the final volume discussion.
Remember to carry the building's water and electricity plans and building plans before making your room. It is also necessary to understand the specific properties of the residential property where the house is located, such as specific requirements for hydropower renovation, whether the house facade can be demolished or not, whether the balcony windows can be closed, etc., to avoid unnecessary troubles.
This is actually not a big problem after going to the property and understanding the property. Regarding the quantity of rooms, Xiao Bian feels that it is really important and has a great influence on the design and construction of the future. Therefore, we must pay attention to it!
Renovation Preparation Villa Design Entrance Decoration Window Housing Room Toilet Decoration Design Floor Tile
Black Steel Roofing Screw,Roofing screw,Black Screw,number 14 screw,waterproofing screw
Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com