Fiberglass/FRP/GRP Electric Cross Arm/Pole

Production Description


We offer a wide range of pultrusion products for the Pultrusion process. Pultrusion is a continuous, automated closed-moulding process that is cost effective for high volume production of constant cross section parts. The basic process usually involves pulling of continuous fibers through a bath of resin, blended with a catalyst and then into pre-forming fixtures where the section is partially pre-shaped & excess resin is removed. It is then passed through a heated die, which determines the sectional geometry and finish of the final product

Due to uniformity of cross-section, resin dispersion, fiber distribution & alignment, excellent composite structural materials can be fabricated by pultrusion. The profiles produced with this process can compete with traditional metal profiles made of steel & aluminium for strength & weight.

By using various additives, liquid resin systems can be made suitable to provide specific performance. Alumina trihydrate is filler that is used for its ability to suppress flame and smoke generation. Special purpose additives include ultraviolet radiation screens for improved weatherability, antimony oxide for flame retardance, pigments for coloration, and low-profile agents for surface smoothness and crack suppression characteristics.

Our factory produces standard FRP profiles, such as: rectangular tube, square tube, round pipe, gear, bars, U profiles, I profiles, window profiles, angle profiles and sheet, etc and profiled bar for clients' customization.


                         


We are 14 years of experience in FRP production, and export experience for 5 years:



Qinhuangdao Shengze New Material Technology Co.,LTD. formerly is Qinhuangdao HaoTian fiberglass reinforced plastic Co.ltd,was estabilished in 1993. 

Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. 

The main products are various kinds of frp pultrusion profiles, SMC products , FRP hand lay out product and vacuum infusion products. The annual production capacity is about 8,000tons. 

ShengZe with complete sets of professional equipment from fiberglass raw material manufacturing to after treatment. There are 10 advanced frp pultrusion production lines, SMC production line, special frp hydraulic equitment from 100tons-3000tons, RTM production lines and test machine etc. 

With decades of experience and performance based on excellent technology and dedication to the top quality standards in manufacturing and customer satisfaction. ShengZe ensures our solutions are the most innovative and cost effective ones. 

As an ISO accredited Company, Shengze shows committed to quality, customer and a willingness to improve efficiency. 

Shengze FRP products have exported to South Asia, Middle Asia and Middle East, Europe , American and got high praise. 

We sincerely welcome guests from domestic and abroad to visit and cooperate with us!


Contact US:
For FRP products, if you have any questions please feel free to contact me, I will make professional solutions for you in time. 

I am Antony
 
Tel:+86 13931334932 Production Description


We offer a wide range of pultrusion products for the Pultrusion process. Pultrusion is a continuous, automated closed-moulding process that is cost effective for high volume production of constant cross section parts. The basic process usually involves pulling of continuous fibers through a bath of resin, blended with a catalyst and then into pre-forming fixtures where the section is partially pre-shaped & excess resin is removed. It is then passed through a heated die, which determines the sectional geometry and finish of the final product

Due to uniformity of cross-section, resin dispersion, fiber distribution & alignment, excellent composite structural materials can be fabricated by pultrusion. The profiles produced with this process can compete with traditional metal profiles made of steel & aluminium for strength & weight.

By using various additives, liquid resin systems can be made suitable to provide specific performance. Alumina trihydrate is filler that is used for its ability to suppress flame and smoke generation. Special purpose additives include ultraviolet radiation screens for improved weatherability, antimony oxide for flame retardance, pigments for coloration, and low-profile agents for surface smoothness and crack suppression characteristics.

Our factory produces standard FRP profiles, such as: rectangular tube, square tube, round pipe, gear, bars, U profiles, I profiles, window profiles, angle profiles and sheet, etc and profiled bar for clients' customization.


                         


We are 14 years of experience in FRP production, and export experience for 5 years:



Qinhuangdao Shengze New Material Technology Co.,LTD. formerly is Qinhuangdao HaoTian fiberglass reinforced plastic Co.ltd,was estabilished in 1993. 

Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. 

The main products are various kinds of frp pultrusion profiles, SMC products , FRP hand lay out product and vacuum infusion products. The annual production capacity is about 8,000tons. 

ShengZe with complete sets of professional equipment from fiberglass raw material manufacturing to after treatment. There are 10 advanced frp pultrusion production lines, SMC production line, special frp hydraulic equitment from 100tons-3000tons, RTM production lines and test machine etc. 

With decades of experience and performance based on excellent technology and dedication to the top quality standards in manufacturing and customer satisfaction. ShengZe ensures our solutions are the most innovative and cost effective ones. 

As an ISO accredited Company, Shengze shows committed to quality, customer and a willingness to improve efficiency. 

Shengze FRP products have exported to South Asia, Middle Asia and Middle East, Europe , American and got high praise. 

We sincerely welcome guests from domestic and abroad to visit and cooperate with us!


Contact US:
For FRP products, if you have any questions please feel free to contact me, I will make professional solutions for you in time. 

I am Antony
 
Tel:+86 13931334932

Five Blades Ceiling Fan

Smart Ceiling Fan,Intelligence Ceiling Fan,Five Blades Ceiling Fan,5 Blades Ceiling Fan

Jiangmen MagicPower Electrical Appliances Co.,Ltd. , http://www.mpceilingfans.com