- Model NO.: M-1504
- Application: Fence Mesh, Protecting Mesh, Cages, Construction Wire Mesh
- Weave Method: Twist
- Mesh Size: 3/8" to 4"
- Transport Package: Wooden Box
- Origin: Anping, China
- Material: Iron Wire
- Surface Treatment: PVC Coated,Galvanized
- Weave Technique: Weave
- Trademark: MWN
- Specification: wire gauge: 16-27
- HS Code: 73144100
Assortments Available:Â
• Electro Galvanized before WeavingÂ
• Electro Galvanized After WeavingÂ
• Hot Dipped Galvanized before WeavingÂ
• Hot Dipped Galvanized after WeavingÂ
• PVC Coated Before or After WeavingÂ
• Stainless Steel WireÂ
• Galvanized Drawn Iron Wire
Galvanized hexagonal wire netting | |||||
mesh | Min. Gal.v. G/SQ.M |
Width | Wire Gauge (Diameter) BWG |
||
Inch  |
mm | Tolerance(mm) | |||
3/8" | 10mm | ±1.0 | 0.7mm - 145 | 2' - 1M | 27, 26, 25, 24, 23 |
1/2" | 13mm | ±1.5 | 0.7mm - 95 | 2' - 2M | 25, 24, 23, 22, 21 |
5/8" | 16mm | ±2.0 | 0.7mm - 70 | 2' - 2M | 27, 26, 25, 24, 23, 22 |
3/4" | 20mm | ±3.0 | 0.7mm - 55 | 2' - 2M | 25, 24, 23, 22, 21, 20, 19 |
1" | 25mm | ±3.0 | 0.9mm - 55 | 1' - 2M | 25, 24, 23, 22, 21, 20, 19, 18 |
1-1/4" | 31mm | ±4.0 | 0.9mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
1-1/2" | 40mm | ±5.0 | 1.0mm - 45 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2" | 50mm | ±6.0 | 1.2mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2-1/2" | 65mm | ±7.0 | 1.0mm - 30 | 1' - 2M | 21, 20, 19, 18 |
3" | 75mm | ±8.0 | 1.4mm - 30 | 2' - 2M | 20, 19, 18, 17 |
4" | 100mm | ±8.0 | 1.6mm - 30 | 2' - 2M | 19, 18, 17, 16 |
Note:
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
Â
PVC Coated Hexagonal Wire Netting | |||
Mesh | Wire Gauge (MM) | Width | |
Inch | MM | - | - |
1/2" | 13mm | 0.6mm - 1.0mm | 2' - 2M |
3/4" | 19mm | 0.6mm - 1.0mm | 2' - 2M |
1" | 25mm | 0.7mm - 1.3mm | 1' - 2M |
1-1/4" | 30mm | 0.85mm - 1.3mm | 1' - 2M |
1-1/2" | 40mm | 0.85mm - 1.4mm | 1' - 2M |
2" | 50mm | 1.0mm - 1.4mm | 1' - 2M |
Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request;Â
Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);
Â
hot prodcuts Sodium CO.,Ltd , http://www.nssulphates.com