First, the overall cabinet countertop selection
1. Quartz stone countertops
Quartz stone countertops are characterized by high temperature resistance, smooth surface and high hardness. Another advantage is that it is not easy to be scratched. And the cost of quartz stone countertops will not be too high, the cost performance is relatively high, it is a better choice for the whole countertop.
2, artificial stone countertops
The artificial stone countertops also have the characteristics of high temperature resistance, wear resistance and pressure resistance, and there is no gap on the surface, which is less likely to be contaminated and easy to clean. Therefore, the artificial stone countertops are favored among all the materials in the countertops of the whole cabinet.
3, stainless steel countertops
The stainless steel countertops are quite different from the two stone countertops above. The metal countertops are stronger and easier to clean. However, if there is a shortage of stainless steel countertops, it is easier to be scratched, and the look is not as good as the stone countertop. The average kitchen in the home uses stainless steel as a countertop. It is generally used in kitchens in public places such as hotels and restaurants.
Second, the overall cabinet countertop acceptance criteria
The material properties of the countertops of the whole cabinet will directly affect the quality of the countertops, and the state of its installation will also affect its service life. Therefore, it is very necessary to check the whole cabinet countertop. Let's take a look at the specific acceptance method.
1. Checking the appearance is the first step of acceptance. First, look at the counter surface of the whole cabinet for scratches, cracks, indentations and bumps. And the acceptance is reflected to the merchant, and the merchant is required to deal with the matter in accordance with the prior agreement.
2. After the appearance inspection of the countertop is completed, it is necessary to check the connection between the countertop and the cabinet. For example, whether the countertop and the cabinet are stable between the cabinet and the ground, whether the cabinet and the wall are firmly combined, and whether the cabinets are closely attached. Hehe.
3. The countertop should be kept parallel with the hanging cabinet. The door panel of the cabinet should ensure that all the upper and lower sides are neat, the gap is even and the switch is flexible.
4, the countertops of the whole cabinet will have a splicing place, this place is the focus of inspection. The gap should be evenly filled with glue, the surface should be careful not to leave a mark of glue, and the requirement is that there is no obvious stitching trace from 2 meters away.
5, the countertop of the whole cabinet should be polished and waxed, evenly without wax marks, the whole surface of the table is smooth and clean.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzhen cabinet network "; you can view the popular article " Cabinet, sell well! However, the manufacturer suddenly said that it would raise prices! 》 , want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
Face Mask is multi-layered non-poisonous, non-allergic, non-stimulating. it is made of spunbonded non woven fabric and meltblown non woven fabric, Low breathing resistance with high filtration efficiency.The high-efficient and strong electrostatic filtering materials effectively filter the solid particle dust, and prevent the oil liquid gas.It can be used in hosipital,or industrial eara.protect face from the dust,water and bacteria. Conforms to international standard:EN149:2001 FFP1 FFP2 CE0194 N95. Adjustable contoured aluminum nosepiece and a soft inner foam nose cushion help to ensure proper fit and increase worker comfort.
Face Mask
Face Mask,Face Mask KN95
Yucheng Jinhe Industrial Co.,Ltd , https://www.jinhetec.com