Living room decoration is a major focus in home decoration, many in the ceiling will be a lot of effort, this will not only enhance the overall space aesthetics, but also increase the sense of space, creating a warm living room. Nowadays, many people will do special ceiling decoration when they are decorating. So, what do you know about ceilings? The following Xiaobian introduced to everyone the reference to the several practices of the ceiling.
Ceiling practice classification
The ceiling design, also known as ceiling design, ceiling design, is to use the elegant materials and lighting to "bundle" the bare ceiling. The top surface is a simple flat surface treatment, using modern lighting fixtures, with exquisite corner lines, but also gives people a relaxed and natural pleasant style. Ceilings generally have flat ceilings, superimposed ceilings, special ceilings, linear ceilings, arc ceilings, etc. However, due to the lighting or special needs of many houses, not only ceilings are needed, but also the top surface needs to be specially designed. Therefore, whether or not to ceiling, what kind of top to hang should be based on the actual situation of the room and personal preferences. A well-conceived ceiling that fits the characteristics of the house can not only make up for the shortcomings of the room, but also add personality to the living room. Therefore, choosing a ceiling is the same as choosing your own bedroom.
First, the plane ceiling
Visual characteristics: It is equivalent to adding a flat plate to the top surface, usually adding an auxiliary light source inside.
Applicable room: generally only used in foyer, restaurant and other small areas. In order to increase insulation, a ceiling is also used on the top floor. If you use more than the area, it is recommended to use when the room height is greater than 2.7 meters.
Suitable style: modern and simple
Common materials: light steel keel + gypsum board
Second, overlapping ceiling
Visual features: Ceilings with more than 2 floors.
Applicable room: It is mostly used for units that are equipped with central air conditioning, because the central air-conditioning is about 35 centimeters thicker. The superimposed ceiling can increase the sense of hierarchy, and has a higher requirement for the room height. The general requirement is 2.7 meters or more.
Suitable style: modern and simple
Common materials: light steel keel + gypsum board
Third, special-shaped ceiling
Visual characteristics: suspended ceilings with irregular patterns are called shaped ceilings.
Applicable room: normal room height (2.6 meters) can be hoisted. Due to material limitations, these graphics are limited to simple cartoons such as stars and moons, and are therefore more common in children's rooms.
Suitable for style: suitable for a variety of styles, depending on the shape of the pattern.
Common materials: Light steel keel + gypsum board + latex paint
Fourth, straight ceiling
Visual characteristics: The linear ceiling is similar to the vertex line, but the vertex line is narrower and thinner. The width of the linear ceiling is mostly between 30-45 cm, and the thickness is between 8-12 cm.
Applicable room: Room height 2.6 meters, living room, bedroom and other areas can be hung, suitable for four-square house.
Suitable style: modern and simple
Common materials: light steel keel + gypsum board
Fifth, arc ceiling
Visual characteristics: The arc ceiling often has to walk around the space, but the lines are mostly curved or wavy.
Applicable room: suitable for the shaped room. Room height 2.6 meters, restaurants, living room, etc. will do.
Suitable for style: decorative style is not obvious, can increase the dynamic and reduce the dull feeling.
Common materials: light steel keel + gypsum board
Six, mixed ceiling
Visual characteristics: Use two or more of the above suspended ceilings or use materials in two or more ceilings.
Applicable room: relatively complicated, it is recommended that the room height is 2.8 meters or more before considering the use of such a ceiling, otherwise it is easy to make the space appear repressed.
Appropriate style: It depends on the materials used and the style of the model, but it does not apply to modern minimalist styles.
Common materials: Light steel keel + gypsum board, wooden floor, sauna board, wallpaper, mirrors and glass.
VII. Suspended ceiling
Visual characteristics: Vaulted ceilings are arched or covered ceilings.
Applicable rooms: Mostly found in villas, suitable for rooms with particularly high ceiling height or with a pointed roof. The minimum space requirement is more than 2.6 meters. The highest point is not required, usually around four or five meters.
Suitable style: European and European style
Common materials: light steel keel + gypsum board, wallpaper, cloth, etc.
Ceiling construction considerations
First, most of the interior decoration now employs suspended ceilings. The first thing to pay attention to is the selection of materials for ceiling construction. The relevant operations must be performed strictly in accordance with the construction specifications. The correct position must be ensured during installation to ensure firm connection. Decorative materials used for ceilings, walls, or floors shall be characterized by non-combustible or flame-retardant materials. Wood materials are flammable materials. Therefore, fireproofing procedures shall be performed. Generally, some electrical lines, such as lighting and air conditioning, are laid inside the ceiling. It must be operated strictly in accordance with the regulations, which can effectively avoid potential fire hazards.
Second, access holes shall be provided for the suspended ceilings. In the home decoration, the ceiling is generally not provided with an inspection hole, and it is considered to be aesthetically pleasing. I wonder if once the pipeline equipment in the ceiling fails, it can not be checked to determine what part, what is the reason, and it cannot be repaired. Therefore, the ceiling for laying pipelines is also provided with an inspection hole. For better, choose a more concealed and easy-to-check location, and articulate the manhole, such as with a fixture or fixture.
Third, the kitchen, bathroom ceiling should use metal, plastic and other materials. The bathroom is a place for bathing and washing. In the kitchen, it is necessary to cook and stir the dishes. Although the range hood and the exhaust fan are installed, the steam cannot be completely drained. The veneer or the paint that absorbs moisture will deform and peel. Therefore, materials that do not absorb moisture should be used. Generally, metal or plastic gussets should be used. If other materials are used for ceilings, measures should be taken to prevent moisture, such as brush painting.
Fourth, glass or light box ceilings should use safety glass. The use of colorful colored glass and frosted glass as ceilings is very characteristic. There are more and more applications in home decoration. However, if the materials are not properly used, safety accidents are likely to occur. In order to use safety, safety glass should be used on ceilings and other vulnerable parts. At present, China's toughened glass and laminated glass are safety glasses.
Reminder: For more information, please pay attention to the information on this website , or you can visit our offline experience directly.
More exciting recommendations
AIA integrated ceiling
Integrated ceiling installation method
Kitchen integrated ceiling
Haichuang integrated ceiling
Xilinmen ceiling
Aopu integrated ceiling price
Ceiling Ceiling Design Integrated Ceiling Room Simple Space Central Air Conditioning Style Decoration AIA Integrated Ceiling Price Ceiling Price Plasterboard Ceiling Ceiling Price Modern Minimalistic Style Decoration Living Room Decoration Style Kitchen Integrated Ceiling Glass Door Kitchen Glass Sliding Door Children Restaurant Restaurant Ceiling
| For products reference | ||
| No. | Item | Description |
| 1 | Bearing Bar Size | 25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10---100x10mm etc. |
| I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etcUS standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc. | ||
| 2 | Bearing Bar Pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 31, 32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc. |
| US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc. | ||
| 3 | Cross Bar Size and Pitch | Twisted bars 5x5, 6x6, 8x8mm; Round bars Dia.6, 7, 8, 9, 10, 12mm and so on. |
| 38.1, 40, 50, 60, 76, 80, 100, 101.6, 120, 135mm, 2'' & 4'' etc. | ||
| 4 | Material Grade | ASTM A36, A1011, A569, Q235, S275JR, SS400, Mild steel & Low carbon steel, etc. |
| Stainless steel SS304, SS316.s335jr | ||
| 5 | Surface Treatment | Black, self colour, hot dip galvanized, painted, powder coating, electrolytic polishing. |
| 6 | Grating Style | Plain / Smooth, Serrated /teeth, I bar, serrated I bar. |
| 7 | Standard | China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88),UK: BS4592-1987, Australia: AS1657-1985,Germany: DIN24537-1-2006, Japan: JIS. |
| 8 | Panel Size: | 3x20ft,3x24ft,3x30ft,5800x1000, 6000x1000, 6096x1000,6400x1000, as request |
| 9 | Application: | oil refinery,petroleum and chemical Industry, Seaport and airport, power plant, transportation, papermaking, medicine, steel and iron, food, municipality, real estate, manufacturing,metallurgy,railway,boiler,etc |
Steel Grating,Steel Bar Grating,Galvanized Steel Bar Grating,Steel Bar Grating For Bridge
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com