Today, when many parts of the renovation construction workers have to use moldings, the moldings in the end is what is it? Diagonal of which is the correct way to use some of the advantages of moldings and maintenance methods are what, here we come Let's take a look at our article on how to introduce the corners in this decoration home network, and if friends want to know other related knowledge about corner decoration, you can follow our website.
First, the introduction of the corner
1. The corner line refers to the line where the cutting line is printed on the periphery of the paper to indicate the cutting position. By setting the layout page to the actual size, the prepress workstation and the imagesetter cannot record the bleeding portion beyond the page range. If you want to get the right bleeding, you have to change the page size in the typesetting software to adjust the actual page size and bleeding.
2, this must have a larger page size, in order to manually draw and place the cutting line, this is easy to make mistakes. Today's prepress equipment is no longer hindered by these limitations (the current imagesetter can record larger formats and use wider film). Most printing devices recommend setting the file size to the actual page size, allowing the application to automatically generate the correct positioning of the crop line.
Second, the use of the corner line
1, plus edge banding
The edge banding is mainly to protect, decorate and beautify the section of the furniture sheet. This process can make the furniture have a clear and colorful decorative effect. The function of the edge band is mainly to seal the section of the plate to avoid damage to the environment and the water used in the use, and to prevent the volatilization of formaldehyde in the plate, thereby achieving the effect of decorative beautification.
2, grinding 45 ° angle
This is the most traditional treatment, grinding both tiles at a 45° angle and then affixing them diagonally. However, there are also problems. The interior of the tile corner is not filled with cement, so it is very easy to break. In addition, some of the masonry techniques are not closed, the chamfers are not regular, and in the future, they will encounter thermal expansion and contraction, which is prone to cracks.
Third, the maintenance method of the corner
1. Don't use too much force to avoid scratching. Have accidentally brought the permeable things to the top, then we need to dig the ground with the permeable things, then use the gypsum powder to adjust the gypsum slurry to fill the hole, and then fill it in. After the gypsum slurry is dried, it can be smoothed with something and smoothed. If the gypsum slurry on your body is dry and you find that the color is different from the previous color, then we can only use the gypsum slurry to make the entire plaster mold from the beginning, which is hard work.
2. After the stains, we can also make the gypsum powder into gypsum water to fill our stains. The gypsum water is made by mixing 50g of quicklime into 1500ml of water, mixing it evenly, soaking the plaster mold with stains inside for about 3-10 minutes, soaking it, then cleaning it with water for 2-5 times, washing After drying it, dry it and then sprinkle it with chalk powder, so that the color of our plaster mold can recover the color of the past.
3. If our plaster mold is covered with oil for a long time, then I should not use the second method above. At this time, we probably put the mold into 1000ml soapy water and participate in 10 to 30ml of ammonia water, quietly clean for about 20 minutes, clean and clean with clean water.
All the above introductions are some introductions of our corners, and if you use corners to decorate in the future, how to use some methods of corners, and what maintenance methods are available for our corners, if friends still have other Interested in the decoration information, just pay attention to our decoration home network and some decorative information.
More related wonderful reading:
How to decorate the corner line? What are the renovation precautions?
Yang angle line manufacturers introduced, the role of tile angle line introduction
The role of the tile angle line is the material of the tile angle line.
Renovation construction_wood top angle construction technology
What are the classification of the Yinjiao line? How to stick the Yinjiao line?
As a top-notched supplier in lifting business,WinnerLifting surely provides round slings,too.
Things are quite similar as webbing slings here.
You can both find colorful round slings defined by their lifting capacities,and differrent safety factors.
This is the kind of product which almost doesn't have limit,as you can see there are even giant slings for lifting submarines.
Tell us what you need and how many you need,we'll talk care of all the rest.Thanks!
Polyester Round Slings,Nylon Webbing Slings,Synthetic Web Slings,Round Lifting Slings,Round Sling
WINNERLIFTING SAFETY EQUIPMENT CO.,LTD. , https://www.winnerlifting.com