Dai Hongjun: Male, professor-level senior engineer 
Born in November 1946, graduated from Northeastern University in 1970, majoring in non-ferrous metallurgy; in 1970, he entered the 401 factory of the Ministry of Metallurgy, engaged in the manufacture of silicon carbide smelting and its products, industrial instrumentation and automatic control; in 1977, he entered the mechanical department Zhengzhou abrasive mill. With the grinding research institute, he served as the director of the ninth research office, the director of the technical operation office, and the director of the planning office. He is responsible for the research and design of abrasive abrasives, coated abrasives and super-hard materials industry equipment, and presided over the high pressure chamber pressure of ultra-high pressure equipment. Research on temperature detection and control methods, participated in the research of large single crystal production process of superhard materials; in 1989, he entered the China Abrasives Import and Export Corporation, and served as the manager of the European Department and the general manager of the Italian branch. In 2000, he served as the deputy secretary-general of the Abrasives and Abrasives Branch of China Machine Tool Industry Association. He was also the chairman of the Expert Committee of Abrasives and Abrasives Branch, the member of the National Abrasives Standardization Committee, and the expert of the National Machinery Industry Experts. He is a visiting professor at Henan University of Technology and Northeast Forestry University and an independent director of Fenike Superhard Materials Co., Ltd. For many years, he has been engaged in the production of abrasives, scientific research, teaching, import and export trade and industry work, and has won many scientific and technological achievements awards at the provincial, municipal and municipal levels.
(The above members were approved by the China Machine Tool Industry Association Coating Abrasives Branch Expert Committee on August 2, 2012, and the Chapter Council approved on October 25, 2012)
Fang Hong: Female, currently deputy general manager, chief engineer and senior engineer of Dongguan Golden Sun Grinding Co., Ltd.
Born in September 1965, graduated from the Department of Chemistry of Lanzhou University in 1986. In the same year, he entered the Baige Group Abrasive Belt Company, engaged in technical management, product development, engineering and technical transformation of coated abrasives. He has served as the head of the technical department of the belt company and the head of the new product development section. In March 1998, he was promoted to senior engineer. He has presided over a number of scientific and technological projects, including: "High-grade coated abrasive products for blended fabrics" and "Environmental incineration and renovation projects for abrasive belts" won the first prize of Henan Province Machinery Industry Science and Technology Progress; "High-grade coated abrasives series bonding" "The agent" won the second prize of Henan Province Machinery Industry Science and Technology Progress; "JB/T8606-1997 abrasive belt standard" won the third prize of the National Machinery Industry Bureau and the first prize of the National Abrasives Standards Committee. In 2005, he joined Dongguan Golden Sun Grinding Co., Ltd. and served as the deputy general manager and chief engineer of the company. He is responsible for the production technology management and product research and development of Golden Sun. The “all-resin heavy sandpaper tape†was coated by China Machine Tool Industry. The first prize of the technical progress of the Abrasives Association.
Gao Bingyuan: Male, currently an executive director and economist of Shanghai Wuzifang Abrasives Co., Ltd.
Born in December 1970, graduated from Xi'an University of Technology in applied electronics technology in July 1994. He joined Baige (Group) Co., Ltd. in the same year. In January 2001, he founded Shanghai Gaofang Abrasives Co., Ltd. and started the road of independent entrepreneurship. In October 2010, after multiple planning, it was merged with Wenzhou Ziniu Grinding Co., Ltd. and Shanghai Xinwuji Abrasives Co., Ltd. to form Shanghai Wuzifang Abrasives Co., Ltd., embarking on transformation and upgrading to realize sustainable development. Road, so far, the company has been running and integrated, and the company is operating normally. In June 2011, the Coating Abrasives Sub-Committee Committee was established and was elected as the first chairman of the committee with high votes. In the past two years, the committee has carried out several fruitful activities, which have been recognized by the leaders of the association and welcomed and trusted by the colleagues of the products. . There is one patent for utility model declaration.
Li Xianchao: Male, currently the chairman, general manager and senior engineer of Zibo Sisha Taishan Abrasives Co., Ltd.
Born in September 1956, graduated from the Materials Engineering Department of East China Institute of Chemical Technology in January 1982. In the same year, he entered the Fourth Grinding Wheel Factory. He has served as a technician, assistant engineer, engineer and deputy director of the Sisha Research Institute; deputy director of the Sisha Technology Department; Deputy Director of Sisha Ceramic Grinding Wheel Factory; Senior Engineer, Deputy Minister and Minister of Sisha Technology Development Department; Technical Director of Sisha Co., Ltd.; Deputy General Manager and Chief Engineer of Sisha Co., Ltd. He is currently the chairman and general manager of Zibo Sisha Taishan Abrasives. He is also the vice chairman of the National Abrasives Standardization Technical Committee and the deputy director of the China Abrasives Industry Expert Committee. He presided over the overall design, installation, commissioning and research and development of related product technology for the first and second phase coated abrasive production line of Zibo Sisha Taishan Abrasives.
Liu Mingyao: Male, currently deputy director of the Zhengzhou Abrasives Grinding Research Institute, professor-level senior engineer.
Born in May 1958, he graduated from Hunan University in December 1981. In February 1982, he entered the Zhengzhou Abrasives Grinding Research Institute. He has been engaged in the research, development, research and development of abrasives for more than 30 years. He has served as the director of the research office, the deputy chief engineer and the chief engineer. He is currently the deputy director of the Zhengzhou Abrasives Grinding Research Institute. He is also the chairman of the National Abrasives Standardization Technical Committee and the deputy director of the National Superhard Materials and Products Engineering Technology Research Center. Director of Industrial Superhard Abrasives Engineering Laboratory, Deputy Director of Technical Committee of Superhard Materials Branch of China Machine Tool Association, Secretary General of National High-efficiency Precision Abrasives Industry Technology Innovation Strategy Alliance, Secretary General of Henan Superhard Materials Industry Alliance, Distinguished Professor of Henan University of Technology Distinguished professor of Zhongyuan University of Technology, ISO/TC29/SC5 (grinding wheel and abrasive) WG5 working group experts and other positions. He was awarded the title of Special Subsidy Expert of the State Council, High-level Scientific and Technological Talents of China National Machinery Industry Corporation, and Leader of Innovation Team of Henan Province. Hosted, proposed and organized a number of national key projects and major provincial key projects, including the second prize of National Science and Technology Progress Award, the second prize of provincial and ministerial level scientific and technological progress, five third prizes, and one provincial invention gold medal. . He has published more than 20 papers; among them, "self-propagating sintered metal bond diamond grinding wheel and its preparation method" has been authorized by the state invention and applied for international patents. He presided over the appraisal of scientific and technological achievements in a number of abrasives and abrasives industry, organized the formulation of management measures and implementation rules for national and industry standard revision and revision project plans, and completed the construction of the standard system for abrasive abrasives.
Luo Jun: Male, currently the manager of the belt company of Hubei Yuli Abrasive Belt Co., Ltd., senior engineer
Born in June 1970, he graduated from Hubei Chemical Industry School in June 1990. In the same year, he joined Hubei Yuli Abrasive Belt Group (Tongcheng Abrasives Factory). He has worked as a technician, engineer, workshop director and chief engineer, and is currently the manager of the belt company. He has successively presided over the development of new products such as “all-resin water-resistant abrasive clothâ€, “translucent silicon carbide water-resistant sandpaper†and “all-resin wood sandpaperâ€; in 1997, he was responsible for the process design and manufacturing of the first domestic abrasive belt production line. The project was awarded the “Science and Technology Trade Action Plan Project†by the Ministry of Science and Technology in 2004. In 2003, it was responsible for the R&D work of the Group's high-end coated abrasive production line from abroad. The project won the “Second Science and Technology Progress Second Prize in Xianning City†in 2005. prize". In recent years, it has also undertaken the development of "special abrasive belt for metal composite panels", "1600mm super wide abrasive belt", "super precision abrasive belt", "tungsten carbide metal grinding disc", "elastic fiber abrasive belt", "stacked abrasive belt" "A dozen or so new products, and obtained 14 national invention patents and utility model patents, among which, the "special abrasive belt for metal composite panels", "super-precision abrasive belt", "stacked abrasive belt", etc. The new products were awarded the first prize of technical progress awarded by the China Machine Tool Industry Association Coating Abrasives Branch.
Si Wenyuan: Male, currently the chief engineer and senior engineer of Suzhou Far East Grinding Wheel Co., Ltd.
Born in July 1965, master's degree, graduated from Zhengzhou Mechanical College in July 1984, majoring in abrasives and abrasives manufacturing. He joined the work in the same year. He has served as technician, workshop deputy director, technical chief, branch manager, quality inspection department director and chief engineer. Director of the office and deputy chief engineer; in December 1997, he served as chief engineer of Taiyuan Gangyu Group Co., Ltd. and Taiyuan Shuangta Gangyu Co., Ltd.; since September 2005, he has been the chief engineer of Suzhou Far East Grinding Wheel Co., Ltd. He is currently a young and middle-aged expert with outstanding contributions in Jiangsu Province, “333 high-level talents in Jiangsu Province†and “high-level talents in Suzhouâ€. He is also the chairman of the National Abrasives Standardization Technical Committee, the general abrasive sub-technical committee, and the national grinding wheel product license. Reviewer examiner. He has presided over the implementation of several national and provincial-level enterprise technological transformation and new product development projects. Two of them won the second prize of provincial scientific and technological progress and many won the municipal science and technology progress award. As the deputy head of the project, the company implemented the overall expansion of Suzhou Far East Grinding Wheel Co., Ltd., and actively promoted process optimization, equipment upgrading and environmental protection and energy comprehensive utilization projects, and won the second prize of China Machinery Industry Science and Technology and “China Machinery Industryâ€. The second prize of the Group Science and Technology Award. The company introduced the world's advanced coated abrasives and cloth-based processing equipment and imported technology to absorb and innovate, forming a high-end coated abrasive manufacturing technology with independent intellectual property rights, filling the gap. Some products are domestically blank.
Song Honglin: Male, currently the president of Jiangsu Mitsubishi Abrasives Co., Ltd., senior economist and engineer
Born in June 1967, in July 1986, Changzhou Light Industry School graduated from light industry machinery manufacturing. In the same year, he entered Yancheng Gangyu Abrasives Factory (now Jiangsu Mitsubishi Abrasives Co., Ltd.), and served as technician, technical chief, deputy director and deputy. General Manager, Executive Deputy General Manager and General Manager, currently the President of Jiangsu Mitsubishi Abrasives Co., Ltd. He presided over the company's technology research and development work, and successively won a city science and technology progress award, a provincial science and technology progress award, an invention patent and a number of utility model patents, and seven products passed the provincial appraisal.
Wang Cunyin: Male, currently Chairman and Engineer of Henan Ace Abrasive Fabric Manufacturing Co., Ltd.
Born in August 1965, graduated from Hefei University of Technology in August 1987, majoring in polymer chemical engineering. He joined the work in the same year and served as a professional teacher of abrasives and abrasives at Henan University of Technology. In September 1988, he served as the deputy director of the Baige Group Chemical Plant. An all-resin abrasive cloth production line has made outstanding contributions to the trial production and stable production of phenolic resin. In March 1997, it established and operated Henan Ace Abrasive Cloth Manufacturing Co., Ltd., independently designed and produced a complete set of coated abrasive raw cloth production lines and manufacturing lines. In 1999, 2003, 2007, and 2012, according to their own ideas, they were independently designed and transformed independently, and achieved fruitful results.
Xie Guo: Male, currently the general manager of Santai Gurui Industrial Co., Ltd.
Born in June 1975, he joined the work in August 1993. In 1998, he founded Dongguan Dongsheng Abrasive Co., Ltd., engaged in the research, production and sales of flat abrasive cloth wheels. He successively served as deputy general manager and general manager of the company. In 2001, he returned to his hometown to establish Gutai Industrial Co., Ltd. in Santai County, Sichuan Province, and became one of the pillar enterprises of Santai County. He was also recognized as a high-tech enterprise by the Science and Technology Department of Sichuan Province. In 2006, it established a limited liability company in Mianyang Zhongli, which integrates R&D, production and sales in Santai Industrial Park. Since June 2010, he has served as executive deputy general manager and general manager of Santai Gurui Industrial Co., Ltd. “Gurui†not only established a marketing network in the country, but also established strategic alliances with 3M companies, Bosch, Saint-Gobain and many other multinational companies. From 2010 to 2012, he has hosted 1 national project, 4 provincial projects, and 4 municipal and county-level projects. The company's research and development of flat abrasive wheel wheel intelligent manufacturing equipment passed the scientific and technological achievements appraisal of China Machine Tool Industry Association and obtained “First Prize for Science and Technology Progressâ€. "Gurui" has also won the title of "Top Ten New Products in China's Hardware Industry" and "Top Ten Abrasive Tools Suppliers".
Zhang Wei: Male, currently the general manager, engineer, master of Zhengzhou Jia Abrasives Co., Ltd.
Born in October 1964, he graduated from Henan Normal University in 1988 with a bachelor's degree. In 1991, he graduated from Northwestern University with a master's degree in physics. In 1991, he joined the work as an engineer of the technical center of Baige Group; in 1998, he served as the deputy general manager of Henan Road Purification Company; in 2002, he was the general manager of Henan Si Chuang Abrasives Co., Ltd., researching and developing the grinding and polishing products for the picture tube glass bulb; 2006 Founded Zhengzhou Jia Abrasives Co., Ltd. as the general manager, presided over the research and development, production, sales of non-woven abrasive products and the production process and localization of innovative nylon abrasive products. Four patent applications: three-dimensional elastic polishing cloth, synthetic fiber elastic polishing cloth, elastic fiber grinding, a non-woven abrasive product matrix manufacturing.
Zhao Xinli: Male, currently deputy general manager of the Sixth Design and Research Institute of Machinery Industry, researcher-level senior engineer
Born in October 1963, he graduated from Tianjin University in September 1988 with a master's degree in inorganic non-metallic materials. He joined the work in July 1983. In March 1991, he joined the Sixth Design Institute of the Ministry of Electrical and Mechanical Services (now the Sixth Research Institute of Machinery Industry). He has served as an engineer, senior engineer, deputy director, researcher-level senior engineer and deputy director. Director, registered first-class construction engineer, registered machinery, chemical, metallurgical engineer, registered equipment supervisor, senior project manager of the Ministry of Construction, enjoy the State Council subsidy experts, won the title of China Machinery Industry Group science and technology experts, the current machinery industry Deputy General Manager of Six Design and Research Institute Co., Ltd., and chief engineer and dean of the Eighth Institute. He is also the vice president of the Abrasives and Abrasives Branch of China Machine Tool & Tool Industry Association, the deputy director of the Expert Committee of the Abrasives and Abrasives Branch of China Machine Tool & Tool Industry Association, the director of the Advisory Work Committee of the Abrasives and Abrasives Branch of China Machine Tool Industry Association, and the Ceramics Branch of the China Institute of Ceramics. Member of the Furnace Thermal Professional Committee. He has presided over more than 200 engineering design and general contracting projects in the domestic and international abrasives industry, including 12 foreign projects. In the coated abrasive industry, more than 20 projects including the “Double Plus†transformation of the Baige Abrasives Company's cloth processing workshop, the belt production line, the wastewater treatment system and the new curing furnace development were completed. He has published 26 academic papers and co-published 3 monographs and 3 patents. Among them, he won the first prize of provincial and ministerial level scientific and technological progress, four prizes, four second prizes, seven third prizes, and the second prize and third prize of Henan outstanding papers. 4 provincial and ministerial excellent design second and third prizes.
(The above 11 members were approved by the China Machine Tool Industry Association Coating Abrasives Branch Expert Committee on April 9, 2013, and the Chapter Council approved on May 14, 2013)
Born in November 1946, graduated from Northeastern University in 1970, majoring in non-ferrous metallurgy; in 1970, he entered the 401 factory of the Ministry of Metallurgy, engaged in the manufacture of silicon carbide smelting and its products, industrial instrumentation and automatic control; in 1977, he entered the mechanical department Zhengzhou abrasive mill. With the grinding research institute, he served as the director of the ninth research office, the director of the technical operation office, and the director of the planning office. He is responsible for the research and design of abrasive abrasives, coated abrasives and super-hard materials industry equipment, and presided over the high pressure chamber pressure of ultra-high pressure equipment. Research on temperature detection and control methods, participated in the research of large single crystal production process of superhard materials; in 1989, he entered the China Abrasives Import and Export Corporation, and served as the manager of the European Department and the general manager of the Italian branch. In 2000, he served as the deputy secretary-general of the Abrasives and Abrasives Branch of China Machine Tool Industry Association. He was also the chairman of the Expert Committee of Abrasives and Abrasives Branch, the member of the National Abrasives Standardization Committee, and the expert of the National Machinery Industry Experts. He is a visiting professor at Henan University of Technology and Northeast Forestry University and an independent director of Fenike Superhard Materials Co., Ltd. For many years, he has been engaged in the production of abrasives, scientific research, teaching, import and export trade and industry work, and has won many scientific and technological achievements awards at the provincial, municipal and municipal levels. (The above members were approved by the China Machine Tool Industry Association Coating Abrasives Branch Expert Committee on August 2, 2012, and the Chapter Council approved on October 25, 2012)
Fang Hong: Female, currently deputy general manager, chief engineer and senior engineer of Dongguan Golden Sun Grinding Co., Ltd.
Born in September 1965, graduated from the Department of Chemistry of Lanzhou University in 1986. In the same year, he entered the Baige Group Abrasive Belt Company, engaged in technical management, product development, engineering and technical transformation of coated abrasives. He has served as the head of the technical department of the belt company and the head of the new product development section. In March 1998, he was promoted to senior engineer. He has presided over a number of scientific and technological projects, including: "High-grade coated abrasive products for blended fabrics" and "Environmental incineration and renovation projects for abrasive belts" won the first prize of Henan Province Machinery Industry Science and Technology Progress; "High-grade coated abrasives series bonding" "The agent" won the second prize of Henan Province Machinery Industry Science and Technology Progress; "JB/T8606-1997 abrasive belt standard" won the third prize of the National Machinery Industry Bureau and the first prize of the National Abrasives Standards Committee. In 2005, he joined Dongguan Golden Sun Grinding Co., Ltd. and served as the deputy general manager and chief engineer of the company. He is responsible for the production technology management and product research and development of Golden Sun. The “all-resin heavy sandpaper tape†was coated by China Machine Tool Industry. The first prize of the technical progress of the Abrasives Association. Gao Bingyuan: Male, currently an executive director and economist of Shanghai Wuzifang Abrasives Co., Ltd.
Born in December 1970, graduated from Xi'an University of Technology in applied electronics technology in July 1994. He joined Baige (Group) Co., Ltd. in the same year. In January 2001, he founded Shanghai Gaofang Abrasives Co., Ltd. and started the road of independent entrepreneurship. In October 2010, after multiple planning, it was merged with Wenzhou Ziniu Grinding Co., Ltd. and Shanghai Xinwuji Abrasives Co., Ltd. to form Shanghai Wuzifang Abrasives Co., Ltd., embarking on transformation and upgrading to realize sustainable development. Road, so far, the company has been running and integrated, and the company is operating normally. In June 2011, the Coating Abrasives Sub-Committee Committee was established and was elected as the first chairman of the committee with high votes. In the past two years, the committee has carried out several fruitful activities, which have been recognized by the leaders of the association and welcomed and trusted by the colleagues of the products. . There is one patent for utility model declaration. Li Xianchao: Male, currently the chairman, general manager and senior engineer of Zibo Sisha Taishan Abrasives Co., Ltd.
Born in September 1956, graduated from the Materials Engineering Department of East China Institute of Chemical Technology in January 1982. In the same year, he entered the Fourth Grinding Wheel Factory. He has served as a technician, assistant engineer, engineer and deputy director of the Sisha Research Institute; deputy director of the Sisha Technology Department; Deputy Director of Sisha Ceramic Grinding Wheel Factory; Senior Engineer, Deputy Minister and Minister of Sisha Technology Development Department; Technical Director of Sisha Co., Ltd.; Deputy General Manager and Chief Engineer of Sisha Co., Ltd. He is currently the chairman and general manager of Zibo Sisha Taishan Abrasives. He is also the vice chairman of the National Abrasives Standardization Technical Committee and the deputy director of the China Abrasives Industry Expert Committee. He presided over the overall design, installation, commissioning and research and development of related product technology for the first and second phase coated abrasive production line of Zibo Sisha Taishan Abrasives. Liu Mingyao: Male, currently deputy director of the Zhengzhou Abrasives Grinding Research Institute, professor-level senior engineer.
Born in May 1958, he graduated from Hunan University in December 1981. In February 1982, he entered the Zhengzhou Abrasives Grinding Research Institute. He has been engaged in the research, development, research and development of abrasives for more than 30 years. He has served as the director of the research office, the deputy chief engineer and the chief engineer. He is currently the deputy director of the Zhengzhou Abrasives Grinding Research Institute. He is also the chairman of the National Abrasives Standardization Technical Committee and the deputy director of the National Superhard Materials and Products Engineering Technology Research Center. Director of Industrial Superhard Abrasives Engineering Laboratory, Deputy Director of Technical Committee of Superhard Materials Branch of China Machine Tool Association, Secretary General of National High-efficiency Precision Abrasives Industry Technology Innovation Strategy Alliance, Secretary General of Henan Superhard Materials Industry Alliance, Distinguished Professor of Henan University of Technology Distinguished professor of Zhongyuan University of Technology, ISO/TC29/SC5 (grinding wheel and abrasive) WG5 working group experts and other positions. He was awarded the title of Special Subsidy Expert of the State Council, High-level Scientific and Technological Talents of China National Machinery Industry Corporation, and Leader of Innovation Team of Henan Province. Hosted, proposed and organized a number of national key projects and major provincial key projects, including the second prize of National Science and Technology Progress Award, the second prize of provincial and ministerial level scientific and technological progress, five third prizes, and one provincial invention gold medal. . He has published more than 20 papers; among them, "self-propagating sintered metal bond diamond grinding wheel and its preparation method" has been authorized by the state invention and applied for international patents. He presided over the appraisal of scientific and technological achievements in a number of abrasives and abrasives industry, organized the formulation of management measures and implementation rules for national and industry standard revision and revision project plans, and completed the construction of the standard system for abrasive abrasives. Luo Jun: Male, currently the manager of the belt company of Hubei Yuli Abrasive Belt Co., Ltd., senior engineer
Born in June 1970, he graduated from Hubei Chemical Industry School in June 1990. In the same year, he joined Hubei Yuli Abrasive Belt Group (Tongcheng Abrasives Factory). He has worked as a technician, engineer, workshop director and chief engineer, and is currently the manager of the belt company. He has successively presided over the development of new products such as “all-resin water-resistant abrasive clothâ€, “translucent silicon carbide water-resistant sandpaper†and “all-resin wood sandpaperâ€; in 1997, he was responsible for the process design and manufacturing of the first domestic abrasive belt production line. The project was awarded the “Science and Technology Trade Action Plan Project†by the Ministry of Science and Technology in 2004. In 2003, it was responsible for the R&D work of the Group's high-end coated abrasive production line from abroad. The project won the “Second Science and Technology Progress Second Prize in Xianning City†in 2005. prize". In recent years, it has also undertaken the development of "special abrasive belt for metal composite panels", "1600mm super wide abrasive belt", "super precision abrasive belt", "tungsten carbide metal grinding disc", "elastic fiber abrasive belt", "stacked abrasive belt" "A dozen or so new products, and obtained 14 national invention patents and utility model patents, among which, the "special abrasive belt for metal composite panels", "super-precision abrasive belt", "stacked abrasive belt", etc. The new products were awarded the first prize of technical progress awarded by the China Machine Tool Industry Association Coating Abrasives Branch. Si Wenyuan: Male, currently the chief engineer and senior engineer of Suzhou Far East Grinding Wheel Co., Ltd.
Born in July 1965, master's degree, graduated from Zhengzhou Mechanical College in July 1984, majoring in abrasives and abrasives manufacturing. He joined the work in the same year. He has served as technician, workshop deputy director, technical chief, branch manager, quality inspection department director and chief engineer. Director of the office and deputy chief engineer; in December 1997, he served as chief engineer of Taiyuan Gangyu Group Co., Ltd. and Taiyuan Shuangta Gangyu Co., Ltd.; since September 2005, he has been the chief engineer of Suzhou Far East Grinding Wheel Co., Ltd. He is currently a young and middle-aged expert with outstanding contributions in Jiangsu Province, “333 high-level talents in Jiangsu Province†and “high-level talents in Suzhouâ€. He is also the chairman of the National Abrasives Standardization Technical Committee, the general abrasive sub-technical committee, and the national grinding wheel product license. Reviewer examiner. He has presided over the implementation of several national and provincial-level enterprise technological transformation and new product development projects. Two of them won the second prize of provincial scientific and technological progress and many won the municipal science and technology progress award. As the deputy head of the project, the company implemented the overall expansion of Suzhou Far East Grinding Wheel Co., Ltd., and actively promoted process optimization, equipment upgrading and environmental protection and energy comprehensive utilization projects, and won the second prize of China Machinery Industry Science and Technology and “China Machinery Industryâ€. The second prize of the Group Science and Technology Award. The company introduced the world's advanced coated abrasives and cloth-based processing equipment and imported technology to absorb and innovate, forming a high-end coated abrasive manufacturing technology with independent intellectual property rights, filling the gap. Some products are domestically blank. Song Honglin: Male, currently the president of Jiangsu Mitsubishi Abrasives Co., Ltd., senior economist and engineer
Born in June 1967, in July 1986, Changzhou Light Industry School graduated from light industry machinery manufacturing. In the same year, he entered Yancheng Gangyu Abrasives Factory (now Jiangsu Mitsubishi Abrasives Co., Ltd.), and served as technician, technical chief, deputy director and deputy. General Manager, Executive Deputy General Manager and General Manager, currently the President of Jiangsu Mitsubishi Abrasives Co., Ltd. He presided over the company's technology research and development work, and successively won a city science and technology progress award, a provincial science and technology progress award, an invention patent and a number of utility model patents, and seven products passed the provincial appraisal. Wang Cunyin: Male, currently Chairman and Engineer of Henan Ace Abrasive Fabric Manufacturing Co., Ltd.
Born in August 1965, graduated from Hefei University of Technology in August 1987, majoring in polymer chemical engineering. He joined the work in the same year and served as a professional teacher of abrasives and abrasives at Henan University of Technology. In September 1988, he served as the deputy director of the Baige Group Chemical Plant. An all-resin abrasive cloth production line has made outstanding contributions to the trial production and stable production of phenolic resin. In March 1997, it established and operated Henan Ace Abrasive Cloth Manufacturing Co., Ltd., independently designed and produced a complete set of coated abrasive raw cloth production lines and manufacturing lines. In 1999, 2003, 2007, and 2012, according to their own ideas, they were independently designed and transformed independently, and achieved fruitful results. Xie Guo: Male, currently the general manager of Santai Gurui Industrial Co., Ltd.
Born in June 1975, he joined the work in August 1993. In 1998, he founded Dongguan Dongsheng Abrasive Co., Ltd., engaged in the research, production and sales of flat abrasive cloth wheels. He successively served as deputy general manager and general manager of the company. In 2001, he returned to his hometown to establish Gutai Industrial Co., Ltd. in Santai County, Sichuan Province, and became one of the pillar enterprises of Santai County. He was also recognized as a high-tech enterprise by the Science and Technology Department of Sichuan Province. In 2006, it established a limited liability company in Mianyang Zhongli, which integrates R&D, production and sales in Santai Industrial Park. Since June 2010, he has served as executive deputy general manager and general manager of Santai Gurui Industrial Co., Ltd. “Gurui†not only established a marketing network in the country, but also established strategic alliances with 3M companies, Bosch, Saint-Gobain and many other multinational companies. From 2010 to 2012, he has hosted 1 national project, 4 provincial projects, and 4 municipal and county-level projects. The company's research and development of flat abrasive wheel wheel intelligent manufacturing equipment passed the scientific and technological achievements appraisal of China Machine Tool Industry Association and obtained “First Prize for Science and Technology Progressâ€. "Gurui" has also won the title of "Top Ten New Products in China's Hardware Industry" and "Top Ten Abrasive Tools Suppliers". Zhang Wei: Male, currently the general manager, engineer, master of Zhengzhou Jia Abrasives Co., Ltd.
Born in October 1964, he graduated from Henan Normal University in 1988 with a bachelor's degree. In 1991, he graduated from Northwestern University with a master's degree in physics. In 1991, he joined the work as an engineer of the technical center of Baige Group; in 1998, he served as the deputy general manager of Henan Road Purification Company; in 2002, he was the general manager of Henan Si Chuang Abrasives Co., Ltd., researching and developing the grinding and polishing products for the picture tube glass bulb; 2006 Founded Zhengzhou Jia Abrasives Co., Ltd. as the general manager, presided over the research and development, production, sales of non-woven abrasive products and the production process and localization of innovative nylon abrasive products. Four patent applications: three-dimensional elastic polishing cloth, synthetic fiber elastic polishing cloth, elastic fiber grinding, a non-woven abrasive product matrix manufacturing. Zhao Xinli: Male, currently deputy general manager of the Sixth Design and Research Institute of Machinery Industry, researcher-level senior engineer
Born in October 1963, he graduated from Tianjin University in September 1988 with a master's degree in inorganic non-metallic materials. He joined the work in July 1983. In March 1991, he joined the Sixth Design Institute of the Ministry of Electrical and Mechanical Services (now the Sixth Research Institute of Machinery Industry). He has served as an engineer, senior engineer, deputy director, researcher-level senior engineer and deputy director. Director, registered first-class construction engineer, registered machinery, chemical, metallurgical engineer, registered equipment supervisor, senior project manager of the Ministry of Construction, enjoy the State Council subsidy experts, won the title of China Machinery Industry Group science and technology experts, the current machinery industry Deputy General Manager of Six Design and Research Institute Co., Ltd., and chief engineer and dean of the Eighth Institute. He is also the vice president of the Abrasives and Abrasives Branch of China Machine Tool & Tool Industry Association, the deputy director of the Expert Committee of the Abrasives and Abrasives Branch of China Machine Tool & Tool Industry Association, the director of the Advisory Work Committee of the Abrasives and Abrasives Branch of China Machine Tool Industry Association, and the Ceramics Branch of the China Institute of Ceramics. Member of the Furnace Thermal Professional Committee. He has presided over more than 200 engineering design and general contracting projects in the domestic and international abrasives industry, including 12 foreign projects. In the coated abrasive industry, more than 20 projects including the “Double Plus†transformation of the Baige Abrasives Company's cloth processing workshop, the belt production line, the wastewater treatment system and the new curing furnace development were completed. He has published 26 academic papers and co-published 3 monographs and 3 patents. Among them, he won the first prize of provincial and ministerial level scientific and technological progress, four prizes, four second prizes, seven third prizes, and the second prize and third prize of Henan outstanding papers. 4 provincial and ministerial excellent design second and third prizes. (The above 11 members were approved by the China Machine Tool Industry Association Coating Abrasives Branch Expert Committee on April 9, 2013, and the Chapter Council approved on May 14, 2013)
Full Power Emergency Battery Pack
The Full power emergency pack is ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc.
Emergency Lighting Battery Pack,Emergency Battery Pack For Led Lights,Emergency Power Packs,Bodine Battery Pack,led battery backup ballast
Foshan Nai An Lighting Electric Co.,ltd , https://www.articalight.com