Molded door materials and features

The wooden door is made of two pieces of high-density fiber molded door panels with styling and simulated wood grain. Since the door panel is hollow, the natural sound insulation effect is worse than that of the solid wood door, and it is not wet and bumpy.

A molded door is a door made of a molded door panel. The molded door is mainly made of wood of artificial forest, which is peeled, sliced, screened, ground into dry fiber, mixed with phenolic glue as binder and paraffin, and then molded at high temperature and high pressure. Molded door panels often have a concave-convex pattern, which is actually a high-density fiberboard with a concave-convex pattern. Therefore, the molded door is also called a plywood door, except that the door panel is made of a high-density fiber molded door panel.

The following are some of the performance characteristics of the molded door;

The molded door has the characteristics of not being cracked, having a small expansion coefficient and resisting deformation. After a period of use, there is no surface cracking and oxidative discoloration. However, the formaldehyde contained in the fiberboard of the molded wooden door is relatively high, because it is mechanically pressed from two high-density fiberboard pressboards with a shape and a simulated wood grain, and the door of the molded door is hollow. The sound insulation effect is relatively poor compared to solid wood doors, and it is not wet and bumpy. The price of molded wooden doors is more economical and affordable than solid wood doors, and it is safe and convenient. Middle-income families have always favored molded doors. The molded wooden door is decorated with wood veneer and brushed with “varnish”, which maintains the natural texture of the wood. It can also be used for panel mosaic, which is beautiful, lively and economical.

The general composite molded wooden door is delivered with a neutral white primer. Consumers can go home and recolor according to personal preference on the white neutral primer to meet the individual needs of consumers. But Mo Yan's door is very light, the grade is low, and the style of the door is very small.

An important point in purchasing high-quality molded doors is that the panel index pass rate and the glue used in the molding door production process become a key factor in the quality of the molded door. The veneer and the frame are firmly connected without curling and cracking; the horizontal and vertical keels of the inner frame are arranged in accordance with the design requirements, and the keel should be provided at the hinge. The board is flat, clean, free of thrift, insect eyes, cracks and rot spots, clear wood grain and beautiful texture. The thickness of the veneer is less than 3 mm.

In addition, the mold door must be installed to ensure that the wall and the ground are completely dry. After the surface of the door leaf is painted, the installation of the hardware components should be based on the internal structure of the door (if you match the hardware, you can first measure it in order to avoid the size.) Problems occur) When installing, it is best to control the error of the category door and the door frame within the allowable deviation range.

Concerned about surprises

Label: Material and characteristics of molded door

Previous: What are the requirements for the tower crane installation process? Next: How the vertical dryer works

Steel Plate

Steel Plate,Stainless Steel Plate,Alloy Steel Plate,Resistant Steel Plate

Shijiazhuang Huize Pipe Fitting Co., Ltd. , https://www.huizegd.com