1, the characteristics of pipeline booster pump: Booster pipeline is a boasting a wide range of performance, stable operation, the use of affordable, reliable operation, complete protection features, easy installation and other characteristics of the equipment. Understand the working principle of pipeline booster pump for the deployment of work and the use of products has a very important role. Pipeline booster pump mainly through the movement of the rotor, the air out, in order to achieve work. Working principle of the pipeline booster pump (Asian Fluid Network) 2. Principle of the pipeline booster pump: The pipeline booster pump is driven by a low pressure gas (2-8bar) of a large area piston to generate high pressure gas / liquid on a small area piston. Can be used for compressed air and other gases, the output pressure can be steplessly adjusted by the driving pressure. Gas pipeline booster pump has a single-action pump and double-acting pump, double-acting pump air piston in both reciprocating stroke are compressed gas. When the driving gas is applied to the gas piston, the working piston can be driven with gas to obtain a larger output flow rate. Booster pump has the following characteristics: Maintenance is simple: booster pump parts and sealing less, simple maintenance and low cost with the pressure increase. Cost-effective: booster pump with high output performance and low cost characteristics. Adjustability: booster pump output pressure and flow are driven by the gas pressure regulating valve accurately adjusted. Pneumatic liquid pipeline booster pump maximum working pressure up to 700Mpa, pneumatic gas pipeline booster pump working pressure up to 300 Mpa. High-pressure pump part of the material is made of high-pressure hard aluminum alloy plunger is made of stainless steel, and double sealed. The material of the key parts can be selected according to the media system. A variety of gas-driven: compressed air, nitrogen, steam and so on. Large output flow: pneumatic pipe booster pump only 0.2-0.8Mpa compressed air. All "O" rings of the same series of pumps, replaceable consumable parts for service packs, greatly reducing maintenance costs. Pneumatic pipe booster pump without the use of lubricants, flexible application: booster pump from simple manual * to fully automated * for, booster pump suitable for various applications and convenient and customer support system compatible. The air motors for most models of pumps in the same series are interchangeable. Automatic dwell pressure: work, the booster pump work quickly back and forth, as the output pressure close to the set pressure value of the pump reciprocating speed decreases until stopped. And to maintain this pressure, then the energy consumption is very small, no heat, no parts movement, when the pressure balance to break the booster pump automatically start work to the next balance. This article is published in Asia Fluid Network Editor, please indicate Asia Fluid Network; Promotion Service Hotline:, QQ:;
Second Punch Case,Hole Punch Mold,Mold Punch Quotation,Punch Pin Molds
Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com