POM
POM DuPont 100 homopolyformaldehyde, high viscosity, with the toughest hardness, excellent thermal stability
POM DuPont 100 P has excellent processing characteristics and the highest toughness in non-modified materials.
Overview of use: Â High-stress parts, processing materials, plates, strips, tubes.
POM DuPont 100 ST high viscosity resin for molds that are easier to fill. The surface is lubricated. Product features: super tough acetal resin.
POM DuPont 100 T toughness and high viscosity
POM DuPont 107 homo-formaldehyde, high strength, high stiffness, good thermal stability, high hardness.
POM DuPont 500 homopolyformaldehyde, good impact strength, good creep resistance
Teflon POM United States DuPont 100 AF 500AF general grade , adding 20% TEFLON3 fiber, surface lubrication. Product characteristics: Physical properties similar to 500 , but with ultra-low friction coefficient and high wear resistance.
POM DuPont 500CL general grade, but added chemical lubricants. Product Features: Low friction and low wear rate for iron, the highest PV limit in all DELRIN homo-formaldehyde resins.
POM US DuPont 500P sticky  The surface is lubricated with excellent processing characteristics. Uniform good characteristics.
Application overview : general mechanical parts, gears, zippers, cams. There is material for machining.
POM US DuPont 500T sticky  Surface lubrication resin. Product characteristics: toughness is similar to DELRIN 100 , low wear, but slightly reduced rigidity and hardness.
POM US DuPont 525GR is sticky. 25% glass fiber reinforced grade has exceptionally high rigidity and strength.
POM DuPont 570 general grade, adding 20% glass fiber, surface lubrication resin. Product characteristics: high rigidity, low warpage, low latency, and good performance in higher temperature environments.
POM DuPont 900P 911P high flow low viscosity surface with lubricated resin, DELRIN 900P has excellent molding properties. The product is similar to DELRIN 500 , but with slightly lower tensile elongation and impact strength. Low shrinkage, fuel resistance, heat-identified derinp , shortening cycle time by 5%-15% , good mechanical properties, better dimensional stability, fatigue resistance, creep resistance, rigidity, etc.
POM DuPont 107UV , 527UV high temperature and UV resistant
POM DuPont 3510 , 4513 , 4520 , 111P BK402 versatility
POM DuPont Asahi Kasei 4590 medical food grade
POM Korea Engineering F20-02 medium viscosity, intermediate flow class, general molding
POM Korea Engineering F20-03 low viscosity, thermal stability, intermediate fluidity, general molding.
POM Korea Engineering F30-03 is a heat-stable, low-viscosity, suitable for high-flow moldings.
POM Korea Engineering FG2025 Glass Fiber Filled Glass Fiber
POM Japan Polyplastic CP15X creep resistance
POM Japan Polyplastic HP25X is highly rigid and highly viscous.
POM Japan Polyplastics M25-44 M25S high viscosity
POM Japan Polyplastics M270 M270S M270-44 M90-44 acetal copolymer, high fluidity and short cycle
POM Japan Polyplastics M90 M90-04 M90S acetal copolymer
POM Japan Polyplastics M90-45 weather resistance
POM Japan Polyplastics SF-20 is highly resistant to impact and flexibility.
POM Japan Polyplastics EB-20 anti-static
POM Japan Polyplastics CH-10 CH-20 CH-30 carbon fiber reinforced conductive grade
POM Japan Mitsubishi F30-03 low viscosity, high fluidity
POM Japan Asahi Kasei 4520 universal grade balance of flow and mechanical properties
POM
POM DuPont 100 homopolyformaldehyde, high viscosity, with the toughest hardness, excellent thermal stability
POM DuPont 100P has excellent processing characteristics and the highest toughness in non-modified materials.
Application Overview: High-stress parts, processing materials, plates, strips, tubes.
POM DuPont 100ST high viscosity resin for molds that are easier to fill. The surface is lubricated. Product features: super tough acetal resin.
POM DuPont 100T toughness and high viscosity
POM DuPont 107 homo-formaldehyde, high strength, high stiffness, good thermal stability, high hardness.
POM DuPont 500 homopolyformaldehyde, good impact strength, good creep resistance
Teflon POM US DuPont 100AF 500AF general grade , adding 20% TEFLON3 fiber, surface lubrication. Product characteristics: Physical properties similar to 500 , but with ultra-low friction coefficient and high wear resistance.
POM DuPont 500CL general grade, but added chemical lubricants. Product Features: Low friction and low wear rate for iron, the highest PV limit in all DELRIN homo-formaldehyde resins.
POM DuPont 500P has a viscous surface-lubricated resin with excellent processing characteristics. Uniform good characteristics.
Application overview : general mechanical parts, gears, zippers, cams. There is material for machining.
POM DuPont 500T viscous surface lubrication resin. Product characteristics: toughness is similar to DELRIN 100 , low wear, but slightly reduced rigidity and hardness.
POM US DuPont 525GR is sticky. 25% glass fiber reinforced grade has exceptionally high rigidity and strength.
POM DuPont 570 general grade, adding 20% glass fiber, surface lubrication resin. Product characteristics: high rigidity, low warpage, low latency, and good performance in higher temperature environments.
POM DuPont 900P 911P high flow low viscosity surface with lubricated resin, DELRIN 900P has excellent molding properties. The product is similar to DELRIN 500 , but with slightly lower tensile elongation and impact strength. Low shrinkage, fuel resistance, heat-identified derinp , shortening cycle time by 5%-15% , good mechanical properties, better dimensional stability, fatigue resistance, creep resistance, rigidity, etc.
POM DuPont 107UV , 527UV high temperature and UV resistant
POM DuPont 3510 , 4513 , 4520 , 111P BK402 versatility
POM DuPont Asahi Kasei 4590 medical food grade
POM Korea Engineering F20-02 medium viscosity, intermediate flow class, general molding
POM Korea Engineering F20-03 low viscosity, thermal stability, intermediate fluidity, general molding.
POM Korea Engineering F30-03 is a heat-stable, low-viscosity, suitable for high-flow moldings.
POM Korea Engineering FG2025 Glass Fiber Filled Glass Fiber
POM Japan Polyplastic CP15X creep resistance
POM Japan Polyplastic HP25X is highly rigid and highly viscous.
POM Japan Polyplastics M25-44 M25S high viscosity
POM Japan Polyplastics M270 M270S M270-44 M90-44 acetal copolymer, high fluidity and short cycle
POM Japan Polyplastics M90 M90-04 M90S acetal copolymer
POM Japan Polyplastics M90-45 weather resistance
POM Japan Polyplastics SF-20 is highly resistant to impact and flexibility.
POM Japan Polyplastics EB-20 anti-static
POM Japan Polyplastics CH-10 CH-20 CH-30 carbon fiber reinforced conductive grade
POM Japan Mitsubishi F30-03 low viscosity, high fluidity
POM Japan Asahi Kasei 4520 universal grade balance of flow and mechanical properties Â
Long Chong (Jiaqiang) plastic raw materials long-term stock supply: PA66 all kinds of plastic raw materials, original original package, quality assurance, welcome new and old customers to negotiate, Tel: 13925799537 Tang Lei
Composite Metal Panel,B Plus Acp,Acp For Facade,Aluminum Corrugated Panel
zhejiang kangzhan new materials co.,ltd , http://www.mcbondacp.com