When our factory processes large workpieces with holes on all sides (Fig. 1), it is difficult to load and unload the original drill. To this end, we have designed a removable clamping structure (Figure 2). Before the workpiece is clamped, due to the action of the spring 5, the hook plate 4 is in the raised position. By lifting the clamping plate 2 by hand, the workpiece can be pushed to the drilling position, the clamping plate 2 is lowered, and the hook plate 4 is pulled and hooked. Hold the pin on the clamp 2, tighten the screw 3, and then press the eccentric handle 8 to clamp the workpiece. When removing the workpiece, loosen the screw 3
North American Standard Light,American Standard Outdoor Lights,American Standard Lamps,North American Standard Lamps
Ningbo Royalux Lighting Co., Ltd. , https://www.royaluxled.com