Talking about the use and care of the monitor

The LCD monitor must have better image clarity, better color reproduction, and more stable features in order to better restore the monitoring reality and provide stronger evidence for follow-up evidence extraction. How can you better ensure the normal use of the LCD monitor? Prior to use, understand some basic LCD monitor maintenance tips, to a certain extent, to extend the life of your monitor.

Monitor usage note

The first thing to do is to avoid the monitor colliding or rubbing against some hard objects. Because the monitor product is fragile, its ability to resist "impact" is also very small, many crystals and sensitive electrical components will be damaged in the event of an impact, so always be careful not to let the monitor have access to those pairs It is easy to cause damage to the object.

In addition, you should always pay attention when cleaning the screen. Do not spray the cleaner directly onto the screen, because these liquids may flow into the screen and cause a short circuit and affect the use. The cleaner should be sprayed onto a clean soft cloth, and then wipe the screen to avoid danger.

Second, if you inadvertently spray cleaner onto the screen, you don't have to worry too much when the cleaner fluid fills the screen. If it is found before the boot just a screen surface mist, gently wipe with a soft cloth on it, if the water has entered the LCD monitor, then put the LCD monitor at a slightly higher temperature, for example, under the lamp , gradually evaporate the water inside.

Third, it is best not to use a screen saver. Why? Then look down and you will know. Because the core structure of the LCD monitor is similar to "sandwich", it is a liquid crystal molecule in which two glass substrates are filled with motion. The signal voltage directly controls the switching state of the thin film crystal, and the transistor is used to control the liquid crystal molecules. The liquid crystal molecules have obvious optics. Anisotropic, able to modulate the light emitted from the backlight to achieve image display. A complete display consists of many pixels, each of which looks like a switchable transistor.

Finally, I would like to tell everyone that if there is a problem with the LCD monitor product, do not dismantle the product without permission. Because the monitor generates high voltage inside, it is not only dangerous for people who do not know to disassemble the monitor. , It is also easy to increase the monitor's fault. Therefore, when problems occur, we must promptly call the Shenzhen V-Crest resident service center to call the consultation center to avoid unnecessary trouble.

Monitor maintenance knowledge

1. When using the monitor, avoid frequent startup and shutdown. Otherwise, it is easy to damage the LCD lamp and shorten the service life of the monitor.

2. Avoid placing the monitor near a heat source or direct sunlight to avoid accelerated aging.

3, avoid using plastic cover monitor. When using, the tip shield or cover cloth should be fully opened to facilitate heat dissipation.

4. Avoid using the monitor for a long period of time, especially in spring and summer, it is best to open it several times a week to avoid reducing the insulation performance of electronic components due to moisture.

5, monitor bogey work. If it is found that the monitor image is flickering, the brightness becomes bright and there is a white retrace horizontal line, and the device generates ozone smell, internal fire, abnormal sound, etc., and should be immediately stopped and promptly inspected.

6, the monitor is susceptible to magnetic interference, can not be used together with other monitors.

7. Do not leave the monitor working in the standby mode for a long time. Turn off the power.

8, the monitor is particularly easy to absorb dust, so it should be placed in a clean and well-ventilated environment.

9, do not put the monitor in a sealed cabinet, pay attention to heat when monitoring.

10, do not use hard objects scratch, hit the monitor, because the surface of the LCD monitor is a polarizing film, if you use a pen or hard objects, it is easy to scratch the polarizing film, affecting the display.


Blue color is one of the main color for PE Tarpaulin. It is HDPE woven cloth+ LDPE laminated on both sides, The lamination is blue color. The Blue PE Tarpaulin is one of the most popular color in Europe, USA, Asia, and Middle east market.

 

For the Blue PE tarp, It is usually used as Storage cover, Utility cover, Pool cover, Machinery cover, Canopy, Irrigation dams, Poultry curtain, Construction, Scaffolding covers, Roofing material, Outdoor and home covering, Leisure sheet, Green house, Trucks boats and tools covers, Agricultural use, Hay cover, Pond liner, Sports equipment cover, Temporary shelter house, Refugee tent, etc. It is tear-proof, water-proof, washable, anti-rot, UV-stabilized. Pls check below the blue PE tarpaulin pictures



Blue PE tarpaulin Blue PE tarpaulin

 

 Blue PE tarpaulin Blue PE tarpaulin As to the Blue PE tarpaulin, we can make any sizes available, subject to customer`s order, and any shape can be made as per customer`s design. The weight we can make are usually 48-300gsm.  If you have demand, welcome to contact us, we will also be there to support you in high quality, reasonable price, good service and fast delivery, etc




Blue PE Tarpaulin

Blue PE Tarpaulin,Blue PE Tarpaulin Sheet,Blue Poly Tarpaulin,Blue Waterproof PETarp

HEBEI OHONG PLASTIC CO. LTD. , https://www.tarpaulin-factory.com