Most people think that the decoration is more troublesome and they are handed over to the decoration company. Few homeowners will learn about the interior decoration process. However, as a homeowner, learn more about the construction process of the decoration. Maybe you can do supervision work in the decoration of your house. Then follow the renovation of the home network Xiaobian take a look at interior decoration construction technology which processes the content of it!
Method / Step:
First, the decoration construction process - pre-design
It is mainly designed according to your own living habits, and a detailed measurement of your room, we do not lazy, it is best to personally measure it again, the measurement content mainly includes: clear the area involved in the decoration process. Especially the tile area, wall paint area, wallpaper area, floor area; clear the main wall size. In particular, it is necessary to design the wall size of the furniture in the future.
Second, the decoration construction process - the main body modification
Entering the construction stage, the main body demolition is the first project, including demolition, wall building, shovel wall, heating, plastic window and so on. The main body of the demolition is white, that is, the framework of the construction site is first put together.
Third, the decoration construction process - hydropower transformation
Before the water circuit was rebuilt, the main structure demolition should be basically completed. Between the two aspects of hydropower transformation and main body demolition, some students may know that the first measurement of the cabinet should also be carried out. In fact, the so-called cabinet measurement did not have any actual content. Because the wall and the ground were not treated, the cabinet designer could not give the specific design size, but only the water outlet and the hood socket reserved by the developer. Location, make some relevant suggestions.
mainly include:
See if the position of the hood socket affects the installation of the hood later;
See if the position of the water meter is appropriate;
Look at the location of the water outlet to make it easier to install the sink later.
For the first measurement of the cabinet, a slightly experienced student can do it himself. After the completion of the waterway renovation, it is best to do the waterproofing of the bathroom. The kitchen generally does not need to be waterproof.
Fourth, decoration construction technology - woodworking
Woodworking, bricklayers, and oilers are the "three brothers" in the construction process. The basic order of appearance is: wood - tile - oil. The basic principle of appearance is - who is dirty and who is first. "Whoever gets dirty first" is also one of the basic principles that determine the order of home improvement, which I will mention later. In fact, woodworking activities such as bag riser, decorative ceiling, plaster line can also be considered as a detailed part of the main body demolition. It does not conflict with the water circuit transformation. Sometimes it needs some Cooperate.
Fifth, the decoration construction process - tiling
In the process of "Watt Workers", the following three links are also involved: installation of door stone and marble window sill. The installation of the stone can be done with the paving slabs. After the paving slabs, the installation of the marble sills is usually done after the window sills are completed. The marble workers will prepare the glass glue and seal the marble and window coverings with glass glue. It is.
Installation of floor drains. The floor drain is the first in the home improvement hardware because it is to be installed together with the floor tiles. Therefore, when students start building materials, they should buy floor drains early.
The installation of the hood. The range hood is the first to appear in the home appliance. After the kitchen wall and floor tiles are laid, you can consider installing the range hood.
"Wattenger second child" leaves the market. At this time, the cabinet can be measured for the second time. To be precise, after the kitchen wall tiles are installed and the hood is installed, the cabinet can be measured for the second time.
Sixth, decoration construction process - brush wall paint
The "oiler's third child" entered the market, mainly finishing the wall surface treatment, brushing the topcoat, and painting the furniture for the "carpentry boss". Students who are ready to paste wallpapers only need to let the "oiler's third child" do the grassroots treatment on the wall of the wallpaper. As for whether or not to leave the last coat, I personally feel that this problem is not necessarily too true. From the experience of my decoration, the significance of leaving a top coat is not very big, because the latter operation is no more dirty than painting. .
Seven, decoration construction process - kitchen and bathroom ceiling
The cabinet ceiling is the first step in the installation process, and it is still continuing the “packaging†of the home. At the same time as the kitchen and bathroom ceiling, the kitchen's moisture-proof ceiling lamps and exhaust fans (Yuba) should have been bought. It is best for students to install the kitchen ceiling lamp and exhaust fan (Yuba) at the same time, or leave the thread and opening.
Eight, decoration construction process - kitchen cabinet installation
After the ceiling is over, you can install it on the door of the cabinet. If you are successful, you can finish the day. At the same time, there are also sinks (which may not include upper and lower water parts) and gas stoves. Before installing the cabinets, it is best to coordinate the property to pass the gas, because the gas stove needs to be tested after it is installed.
Nine, decoration construction process - wooden door installation
On the second day of the cabinet installation, as soon as the wooden door was measured more than a month ago, it was now ready for installation. If it is smooth, it is also the time of day, the hinge, the door lock and the ground suction to be installed at the same time. Students should prepare relevant hardware in advance.
If you want the wooden door manufacturer to install the window cover and the cornice, it should be measured together when the wooden door manufacturer measures it, and installed at the same time on the day of the wooden door installation. At the same time, the installation time of the marble window sill should be considered to be wrong, and arranged in the window cover. After installation.
Remarks: The production cycle of wooden doors is generally one month. Therefore, in order to make the construction period close, it is necessary to let the wooden door manufacturers come to the door to measure the size of the door as soon as possible after the main body is demolished. Regarding the handling of the door opening, everyone needs to pay attention to it. If the height of the door opening in the house is inconsistent, the worker needs to be processed into a contour - good-looking.
Ten, decoration construction process - floor installation
The floor can be installed on the second day of the installation of the wooden door. If it is smooth, it is also a day. Floor installation needs to pay attention to the following issues:
1. Before installing the floor, it is best to let the factory visit the site to check whether the ground needs to be leveled or partially leveled. Some decoration companies or renovation teams will recommend the students to level or partially level the ground, which is subject to the actual survey of the floor manufacturer.
2. Before the floor is installed, the floor of the pavement floor of the home should be cleaned to ensure the dryness of the ground, so do not use water during the cleaning process.
3, when the floor is installed, if there are conditions, the cutting of the floor must be in the corridor. Previous forums have also discussed this issue. Some students think that it is immoral to cut the floor to pollute public areas in the corridor. My idea is to clean up after finishing, not to tighten. The indoor floor cutting is more serious on the wall. Similarly, there is the cutting of the artificial stone countertops in the cabinet. I believe that the renovated students have some experience.
Eleven, decoration construction process - paving wallpaper
On the second day of the floor installation, the house was cleaned up, and it was possible to spread the wallpaper. If it was smooth, it would be the same day. If there are conditions, the floor should be protected on the day of wallpapering; it doesn't matter if there is no condition. It is no problem to hand over the wallpaper glue left on the floor to the pioneering cleaning. Before laying the wallpaper, try to do "do not have anything" on the wall.
Twelve, decoration construction process - radiator installation
On the second day after the wallpaper was laid, the students who replaced the radiator or removed the radiator could hang the radiator on the wall. The same is the time of day.
Wooden door - floor - wallpaper - radiator, this is a generally accepted correct installation sequence, the first to install the wooden door is to ensure that the baseboard of the floor can be closely engaged with the door of the wooden door; the back of the wallpaper is mainly because of the floor The installation is dirty, dusty, and the wallpaper is seriously polluted. Here again I use the principle of "Who is dirty first?" The final installation of the radiator is because only the wall wallpaper is laid to install the radiator.
Thirteen, decoration construction process - switch socket installation
Students should have a detailed understanding or record of the number and location of the switch sockets in the natural environment of the family, especially for the students who affix the wallpaper, sometimes the wallpaper workers are irresponsible, the wallpaper is hung up, and he does not need to use it. The wallpaper knife is marked with a hole in the position of your switch socket. Therefore, it is still necessary for the students to know what they are.
Fourteen, decoration construction process - installation of lamps
There is nothing to say about the lights. After the lights were installed, the home was lit, and the farewell glare of the 100-watt incandescent bulb during the renovation was felt - it felt good.
Fifteen, decoration construction process - hardware and sanitary ware installation
The upper and lower water pipes, bathroom accessories, toilets, drying racks, etc., which were bought before, are all installed. After the "big pieces" were installed, the home was still very "cool". After the lamps and hardware wares were installed, the house was "live" and really "lived".
Sixteen. Decoration construction process - curtain rod installation
The installation of the curtain rod marks the basic end of the home improvement.
Seventeen, decoration construction process ___ pioneer cleaning
Don't wear curtains before the pioneering cleaning, remember to remind everyone in the post of "Explanation of Curtains". When pioneering cleaning, do not have furniture and unnecessary household appliances at home, try to maintain more "flat", so that the pioneering cleaning can be thoroughly cleaned.
Eighteen, decoration construction technology - furniture entering the market
Regarding the purchase time of furniture, my suggestion is that the water circuit must be reconstructed at the earliest, so that we can choose the basic size range of furniture. Therefore, some students have been eager to order furniture before the renovation has begun. Personal feeling is not necessary.
Nineteen, decoration construction process - home appliances enter
At this time, the home appliance should enter the market, the installation of the installation, ready to stay!
Twenty, decoration construction process - home accessories
Home accessories, the final step in home improvement, and has been converted from decoration to decoration, including the installation of curtains are part of the home accessories. As for buying curtains, it is best to order furniture to avoid style conflicts. Home accessories also include the possibility to buy some green plants, wall paintings, furnishings, etc. In short, after you stay, you are free to play.
The above is about the interior decoration construction process? The detailed answer, I do not know if you are satisfied with the introduction of the decoration home network Xiaobian. If you want to know more about the exciting content, please continue to pay attention to our home encyclopedia!
More related wonderful reading:
Renovation construction process, decoration construction technology standards
How to properly decorate the studio? Recording studio decoration construction process
Clear UPVC Pipe Fitting is a kind of UPVC pipe fitting with transparent colour. it has din PN16 and ANSI SCH80,size from 20mm to 280mm. it is used for for water supply, agriculture irrigation, fish farm, pool water system, water treatment, ect.
Ningbo RMI Plastic Co.,Ltd offer clear PVC pipe fitting with specification:
Size:20mm to 280mm
Connection: socket
Standard: DIN PN16 ANSI SCH80
Pressure rate: PN16 ANSI SCH80
Items: Coupling, elbow, tee, reducer, flange, bushing, union, reducing tee, female coupling, made adaptor, end cap.
Clear UPVC Pipe Fitting PN16,Clear PVC Pipe Fitting SCH80,Clear PVC Pipe,Clear PVC Fitting,PVC Fitting
Ningbo RMI Plastic Co.,Ltd , https://www.rmiplast.com