What are the sanitary ware hardware? Many people are not very clear. In fact, hardware wares are very common, including washbasins, bathroom cabinets, showers, toilets, and some bathroom hardware accessories. The following is a detailed explanation of Master Wan Xiaobian. What are the hardware ware installations, including? Hardware ware installation steps/sequences, a series of related questions that take a few days to complete.
First, the hardware and sanitary ware composition
1, urinal: for men.
2, bidet: women's professional, currently domestic use less.
3, bathtub: one of the equipment for high-end bathroom.
4, basin: can be divided into hanging, column type, desktop three.
5, hardware accessories: the form of the pattern is different.
6, toilet: can be divided into two types of flushing and siphoning.
7. Shower room: It consists of a door panel and a floor basin.
Second, the hardware and sanitary ware installation steps
1. Installation of door hinges: Two door hinges with a length of 100mm are installed in the general door. If it is a solid door or a concave-shaped door, three hinges must be used, or two lengths of 125mm should be installed.
2, the installation of the lock: after the door lock is installed, the handle should be between 900-1000mm. Install the lock body and the lock tongue first, so that the lock tongue plate is flush with the door edge, close the door, fix the position of the lock plate, and then install the lock plate, and ensure that the lock plate is flush with the edge of the door cover. hinge.
3, the installation of the handle: the handle installation should be ergonomic and convenient to use. All handles for the same wardrobe must be neat and tidy during installation. The length of all screws should match the thickness of the cabinet door and the drawer surface. When drilling with a drill, the hole size should be the same as the diameter of the screw.
Second, the hardware sanitary ware installation sequence
1, the overall hardware and sanitary ware installation sequence
Inlay wall tiles - suspended ceiling - laying floor tiles - installation of toilets, washbasins, tubs - installation of connection drains - installation of lamps, sockets, mirrors - installation of towel rods and other hardware accessories.
2, the installation order of the washbasin
Expansion bolts are inserted - æ» - the tube rack is hung - put the washbasin on the rack to find the level - the water connection: the washbasin - straighten - the water connection.
3, the installation order of the toilet
Check the floor drain pipe - align the nozzle - level the alignment - draw the mark - punch the hole - put on the putty - put on the rubber pad - screw the nut - the two sides of the water tank on the back of the hole mark - punch - insert Bolt - æ» - - Back tank hoist flat - Screw on the nut - Install the back tank water elbow - Install the splayed door - Insert the float door and the splayed door - Tighten the nut.
4, the installation order of the bathtub
Installation of the water - the ash is tightly closed - the installation of the water - flattening.
General bathroom hardware and sanitary ware installation will be carried out when the house is renovated, so there is no need to worry about the hardware installation order. Oh, the general bathroom installation masters have relevant experience. Finally, we only need to follow the principle of ordering to follow the installation principle. You can check it out. If you want to know more about home information, please continue to pay attention to the home service master.
Editor in charge: Zhou Jiao
H12 Check Valve,Drain Check Valve,Pump Check Valve,Sanitary Check Valve
Wenzhou Dico Valve Technology Co.,Ltd. , https://www.dicovalves.com