I believe that everyone must be very excited at the moment of delivery. After getting the keys, I started to prepare for the house. What is the process of loading the house? Everyone has to ask. Do not use the master to look at the feng shui taboo? Winter is suitable for renovation or summer is suitable for decoration? Do the house process first do it again? Next Xiaobian will take you to see the introduction of the house loading process .
(1) The tool is in place and ready
Before you decorate, you must prepare a few things in your bag. Tape measure (buy 5m, don't 3m), calculator, large board clip (clip list, receipt), in addition, prepare an old towel at the construction site (soft cotton, paste bricks) , plastic bag (wrapped on the pipe joint to prevent dirt from clogging).
(2) Selecting a good day to start work
Before the workers enter the scene, personally measure the corners of the home, take down the pen ruler, mark clearly, don't be lazy. Understand the area involved in the renovation process.
(3) The main body is demolished and enlarged
The main body demolition is a first project, mainly including demolition, wall building, shovel wall, demolition (north), plastic steel window.
(4) Hydropower transformation, and arrange the use of each space
Make sure the exact location of the switch, lamp, washbasin, bathtub, washing machine, etc.
(5) Wrap the ugly pipe
The light pipe keel or red brick should be used for the bag riser. The light steel keel province is also firmly used.
(6) tiling
Before you tiling, buy a floor drain.
(7) Oilers go to battle, scrub brush
Need to remind everyone, if the wall to brush the color, the color must pay attention to, the color of the call is lighter than the color card, must not be the same as the color card or deeper than it, or you will regret it.
(8) Wallpapers, beautiful walls
Do not open the window for ventilation within 48 hours after the wallpaper is posted, let it dry slowly.
(9) Installing the socket panel
The socket panel can be installed in about half a day.
1, the socket is good to buy with the switch function, especially the kitchen, so the rice cooker, microwave oven can be free from plugging and unplugging the power, with the switch can be controlled.
2, although the switch socket is good, but pay attention to practicality.
(10) The ceiling of the kitchen and bathroom, sealed with an ugly part
First install the water heater and Yuba. After installation, the ceiling can be used to better pack the water heater, which is more beautiful.
(11) Installation of cabinets, the birth of a beautiful whole kitchen
The cabinet is a project, and the hood, stove and sink should be agreed in advance. I sent it on the same day and installed it with the cabinet.
(12) Installing the finished door
Finished doors should be installed before the floor, mainly because of the complicated door-mounting steps, hinges, door locks, door stoppers, door frames, etc. There are many tools used, such as installing the floor first, it is difficult to avoid bumps.
(13) Installation of drying racks, curtain rods, lamps, sanitary ware, bathroom hardware
It is recommended that the items with a lot of ash scattered will be fixed one by one before the floor is installed.
(14) Installing the floor
Prepare a little pepper in advance, don't buy the so-called insecticide powder brought by the floor workers, let them sprinkle along the corner.
Workers are not required to cut the floor in the house, cut it in the hallway, and then clean the hallway.
(15) Land reclamation and cleaning
After cleaning, let yourself go through the careful cleaning. Go to the supermarket to buy a package of "five cleansing powder" and get a few old towels.
Use old towels, dry with five cleansing powder, from mouthwash to door, from tile to kicking corner, rubbing one house and one house, don't be lazy, the result will definitely make you proud.
(16) Furniture and home appliances enter the market
A new home with a new look, furniture bears the brunt. Beds, mattresses, wardrobes, shoe cabinets, sofas, dining tables, etc.
(17) Accessories are decorated, the family has a taste
With the decoration of the decorative painting, coupled with beautiful curtains, the gentle taste of the home came out.
Home decoration is interlocking, from the preparation before the start of construction, to the acceptance after the completion of the work, the step by step to do the decoration can do a good job, see above can help you master some simple construction process, let you do more with less The road to renovation.
The above content is a wonderful introduction to the house-packing process. I hope that every reader can be well-intentioned and applied in real life, and you will benefit a lot. Well, today's introduction to the contents of the house installation process is here. Thanks to the readers for reading this article and for the support and love of Xiaobian. If you want to get more home decoration information, please continue to pay attention to the decoration. Home network.
More related wonderful reading:
Gross embryo room decoration process steps
Interior decoration design plan considerations, interior decoration process
House simple decoration design points house simple decoration process introduction
New house renovation process and method can be accommodated after renovation
Old house renovation process old house renovation technique
5730 Blue SMD LED, with the wider view angle than the others Bule SMD LED .
5730 blue SMD LED is deeply loved by their users because of the small size, the high brightnes and 5730 blue SMD LED have the cooling copper at the bottom, which can make the product to get out of the heat in time.
It is often used in LED lighting, LED Lamps, LED backlight, LED panel lights, LED furniture, grow light LED, fill light LED, LED aperture and other lighting products.
In this catalog, we mainly introduce the 5730 blue SMD LED of visible light. 5730 SMD LED, size is 5.7*3.0mm. It can be 2-chips SMD LED.
We supply kinds of 5730 SMD LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.
In this catalog, we mainly introduce the 5730 blue SMD LED.
For this blue SMD LED, we can package with single chip 5730 SMD LED or 2 chips 5730 SMD LED and the power can be 0.1W 5730 blue SMD LED, 0.06W 5730 blue SMD LED, 0.2W 5730 blue SMD LED, 0.5W 5730 blue SMD LED, 0.6W 5730 blue SMD LED, 0.8W 5730 blue SMD LED, 1W 5730 blue SMD LED, 3W 5730 blue SMD LED and so on.
The voltage of the 5730 blue SMD LED is between 1.8-3.5V.
5730 Blue SMD LED, Blue 0.2w SMD 5730 LED, SMD 5730 LED Blue 0.2w, High Brightness Blue SMD LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com