The office furniture industry has also achieved rapid development with the continuous update of production technology, the continuous increase of varieties, the gradual formation of specialized production and the continuous improvement of management level. Office furniture is now loved by all walks of life, and the daily maintenance of office furniture is essential. What are the methods of maintaining office furniture ?
Maintenance of cloth office furniture
The fabric used in chairs and sofas has a comfortable touch and rich colors, which make the expression of traditional furniture more diverse. Common maintenance methods: When dry dirt such as dust and sand is stained, just pat it gently or use a vacuum cleaner to clean it. As for the granulated sand, you can gently brush it inwards with a brush, but Do not use a hard brush to avoid damage to the cloth. If you drink beverages or fruit juices, you can first use a paper towel to absorb the water, then use warm water to dissolve the neutral detergent, then wipe it with a clean soft cloth, and finally dry at low temperature.
Fabric office furniture is mainly based on sofas. Sofas are the main items in ordinary homes. They are very rich in styles and colors, but fabric sofas are not only easy to damage, but also difficult to take care of.
The following editors of Longtai office furniture will reveal the secrets to you. During use and maintenance, you need to pay attention to:
a. Keep a gap of 0.51 cm between the wall and the wall.
b. Avoid direct sunlight, it is best to place it away from the sun, or use translucent tulle curtains to separate the sunlight.
c. Vacuum at least once a week, pay special attention to remove dust accumulated between fabric structures.
d. The pad is turned over once a week to evenly distribute the wear.
e. Stained stains can be wiped with a clean cloth dipped in water. To avoid leaving marks, it is best to wipe from the periphery of the stain. Velvet furniture should not be dipped in water, and dry cleaning agents should be used.
f. The cloth covers and bushes should be cleaned by dry cleaning, not washable, nor bleached.
g. If you find loose thread ends, do not pull them off by hand. It is better to cut the thread ends neatly with scissors.
Leather furniture maintenance
The leather has good heat resistance, moisture resistance and ventilation characteristics, and the natural texture of the leather is less directional, and it is evenly stretchable no matter when it is laid or hung. In addition, the dyeing of the leather is not easy to fade and has an elegant color , Excellent touch and bright appearance, so it has been deeply loved by consumers. How to maintain the attractive appearance of genuine leather products? Weekday cleaning is the key. General maintenance only needs to use a clean and soft cloth to wipe gently. If you want to clean the dirt generated by long-term use, the most ideal way is: first, please use warm water diluted neutral detergent (1% -3%) to wipe first Then, wipe off the cleaning solution with wringed water, and finally polish with a dry cloth. After fully drying, use an appropriate amount of leather care agent to wipe evenly.
　　 Steel furniture maintenance
Steel furniture is the most common kind of office. File cabinets, password cabinets and other products are also indispensable storage tools in office furniture. Steel office furniture is presented on the exterior, and its maintenance method can be wiped with a soft cloth, but avoid using rough, organic solvents (such as turpentine oil, decontaminated oil) or wet cloth to wipe, these are caused by scars, rust The main reason.
(Source: Interactive Encyclopedia Editor: Peter)
Micro-electric motor brush life expectancy shorter than the large-scale electrical machinery, but the use of household appliances is shorter, therefore, a group generally can use the brush a few years in the life of electrical brush need to be replaced during the examples of many .
Material from the brush of a general can select a low friction coefficient and contact voltage drop of larger graphite electric brush, resin binder for the high resistance of natural graphite brush can be used for the poor motor. In addition, more abrasive strong carbon-graphite brush is mainly used mica sudden ultra-small motor.
Micro Motor Carbon Brush Set,Micro Motor Carbon Brush,Electric Micro Motor Carbon Brush,Dc Micro Motor Carbon Brush,High Speed Micro Motor Carbon Brush
Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com