There are always things like this or that when the house is lived for a long time. For example , the floor tiles will swell and you may be surprised at the beginning. When you start to pay attention to this problem, you will find that many families have this situation. Then, what are the causes of the floor tiles bulging? How should the floor bulge be solved? Below, Xiaobian will introduce them in detail. Let's take a look!
First, what is the cause of the floor tile bulging
1. Because the walls are tiled, there is no room for expansion gaps, but when the weather changes drastically, the cement on the floor will be arched, causing the tiles to become empty.
2. When laying floors, because the proportion of mixed cement and yellow sand is not correct, for example, the cement number is low, or the yellow sand is placed in a lot, a long time and the mud can not be bonded to the floor tile, resulting in the upturn of the floor tile.
3, if the original cement floor is very smooth, but there is no re-beaten condition, so the floor is also very easy to appear floor tile arching phenomenon.
Second, how to solve the floor bulging
1, to solve the problem, you must first find the cause of the problem. There are two main reasons for the upturned situation: no gap is reserved, and the weather changes strongly; the proportion of materials laid on the floor is not correct; the smooth concrete floor is floored without packaging.
2. After you find out the reason, if you will handle it yourself, handle it yourself and you will not be looking for a professional teacher to help solve it. The first step is to carefully remove the tilted floor tiles, and then clean the bottom of the bricks, leaving no trace of rubbish.
3. After cutting the tilted part with a cutting machine, the cutting must be done carefully. Otherwise, the floor tiles can be easily shredded. This is a very test technique.
4. Then, using the sander, the floor tile is polished and flattened. When it is attached, it is flatter and will not be tilted. It should be noted that the floor tiles must be polished and smooth, and there should not be a trace of letting go.
5, polished floor tiles to put away, and then clean up the garbage, in accordance with the standard operation of the new floor put up, put up before touching the floor glue, so that it will be more secure.
6. After the tilted floor is pasted again, it will be the same as other floors. Although the operation is simple, but many of the steps to the operation still need a relatively high technology, otherwise do not only affect the mood, but also lose a turn, if the follow-up is in, but there will be a gap, it seems not so uniform.
Xiao Bian concludes: What are the causes of the floor tiles bulging? How to solve the floor bulging? The problem of floor tiles bulging is really common in real life, so everyone should not be surprised to use the right way. To solve, if you can not operate, it is best to ask a professional to do, this is the best and best method.
Micro vacuum pumps are a series of brushed and brushless DC motor-driven pumps, which can be customized according to specific performance requirements. The miniature vacuum Diaphragm pump has large flow and long life. Applicable to various medical, environmental protection, chemical, biological engineering and other instruments and equipment. Ultra-small size, supports a variety of motors. Maintenance-free and long service life.
Mini vacuum pump,Vacuum pump,Vacuum diaphragm pump,Micro air pump
Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com