After we bought the house, it is an important matter to check the house. So what do you need to know about the house? This is something that many people want to know. Next, the home of the decoration house will introduce you to the house. What do you need to know , and what are the precautions when you are inspecting the house? I hope that the following introductions of Xiaobian can help you and hope that we can all buy the house we like.
First, what do you need to know about the inspection?
1. Check whether the house you are staying in is the house you purchased. If it is inconsistent with the purchase contract, attachment and supplemental agreement, you should submit it to the real estate agent before you check it in, re-check and replace it;
2, the area of ​​the error should be based on the contract before the check-in to the real estate business to make their own claims;
3. Check the quality of the house yourself. If you find structural problems, you should submit it to the real estate agent before the check-in and report it to the relevant government departments. If you find non-structural problems, you should make a written record with the real estate agent. Require the real estate company to make a written commitment to repair within a certain period of time;
4. Invent the equipment in the house according to the agreement of the purchase contract, the attachment and the supplementary agreement, check the integrity and use of the water, electricity, gas, heat and other equipment. If there is any discrepancy or defect, the real estate agent should be required at the handover. Indicate on the handover list and ask the real estate agent to confirm in writing the date of the specific replacement and replacement;
5. For matters that cannot be determined in the property delivery verification form or the delivery list provided by the real estate agent, it should be marked as “not clear†or “unidentifiable†and signed or sealed by both parties at the indication.
Second, inspection matters needing attention
1. First, check whether the floor of the building is flat: only need to use a long ruler (or a special ruler with a horizontal level), and check whether it is flat by the wall surface, and observe whether there are scratches and cracks on the wall. Explosion point: When the lime is made of mature lime, it will not be well stirred due to the unevenness of the mixing. When it is applied to the wall, a burst point will be formed. When the "explosion point" is hit with an iron, a large area of ​​looseness and shedding will be found.
2. Secondly, check the wall for cracks: check whether the wall is flat or not, and also need to see if there are cracks on the wall (common four cracks: strength crack, settlement crack, temperature crack, deformation crack), whether there is outside Leaky wire mesh, steel bars. If you find the above wall problems during the inspection, you can finally sign the signature after the developer helps.
3, inspection of water and electricity, this piece if you do not intend to renovate it must be carefully accepted. Mainly to inspect the wire, in addition to see if it is connected to electricity, but also to see if the wire meets the quality of the national standard. Then the cross-sectional area of ​​the wire meets the requirements. In general, the wires at home should not be less than 2.5 square feet. There are special instructions before buying a house.
4, inspection of the door and window, in addition to observing whether the door and window have obvious cracking, but also pay attention to the sealing of the window. The trouble is that only in the rainy days can you try to get good or bad. However, it can generally be confirmed by checking whether the sealing strip is intact or firm. The balcony door generally depends on the level difference between the inside and outside of the balcony door.
What do you need to know about the inspection of the house? The small series of precautions for the inspection of the house is introduced here. I believe that as long as you understand it, what you need to know about the house inspection, then when we accept the house, it will become easier, if you still want to Understand, more home improvement consulting, information, please continue to pay attention to, decoration home network.
More related wonderful reading:
Does the a priori room pay the money first? New house acceptance considerations
What is a rough house? Precautions for rough house inspection
What are the precautions for the inspection of rough houses?
How to check the room of the rough? Four proposals for rough house inspection
How to check the house in the rough house? Blank house inspection steps
Precautions for house inspection: Where is the most detailed answer?
Solenoid Coil Hole Diameter 16mm
The category of solenoid coil which hole diameter is around 16mm to 20mm. Possible applications are solenoid valves like Dust Collector Pulse Valve, refrigeration valve, Pneumatic Valve, hydraulic valve, LPG CNG valve, automobile valve, injector rail, home appliance Solenoid Valve, and so on.
16mm Hole Solenoid Coil, Solenoid Valve Coil 24 Volts, Solenoid Valve Coil 220 Volts, Solenoid Valve Coil 110 Volts
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com