Carpentry
53, the best use of dry larch keel
54. After the large wooden plate is bought, it must be sawn and dried.
55. The woodwork enters the field first to play the horizontal line of the house
56. When the color panel comes in, you must buy a paint brush again to prevent it from being contaminated.
57. The ceiling fan cannot be installed on the ceiling keel
58. The color panel must be pre-selected during construction
59. The ceiling of the suspended ceiling must not be greater than 300 from the wall
60. The gypsum board should be fixed with a countersunk head tapping screw, enter the board surface 1~2MM, and do rust treatment, can not use the gun nail
61, the distance between the plasterboard nails shall not be greater than 200
62. The gypsum board has a 3mm seam with the wall for crack prevention
63, the best angle of the gypsum board at the corner to do protection
64. The paint on the top and bottom of the wooden door should be painted
65, the bottom of the bathroom door cover to brush waterproof
66. The size of the door should be the same
67, furniture as far as possible not to do carpentry, doing also can not do
68, cabinets try to buy the whole, woodworking is not good, the design is not OK
69. Each medium size must be considered well, and it will be troublesome to change it.
70, do not do the dark track to do their own move the door, no way to repair later
71. If the bathroom is small, try to make a sliding door, do not open the door, take up the place
72. Uncertain woodwork must be communicated with the foremen more than ever. Do not let them make their own claim
73. Money is the hard truth in your hand
74. There are children at home and less use of glass
75. Make sure the workers have a good look at the drawings
76, kitchen drawer is very useful
77, floor wood keel flatness is 5MM
78, wool floor to be paved 30 degrees or 45 degrees, between the board and the board to stay 2 ~ 3MM, stitches should be staggered
79, to leave 8 ~ 10MM seam between the floor and the wall
80. Expansion joints should be considered when the length of the composite floor exceeds 8M
81. Minimize the use of MDF for door covers
82. The hinges and hardware must be used well
83. The Yuba should be mounted on wooden keels and cannot be directly attached to ceilings.
Nature Flooring Del flooring Paint Space Houses Glass Doors Drawers Cabinets Doors Glass Sliding Doors Glass Furniture Doors White Furniture Kitchen Doors Glass Doors Kitchen Glass Sliding Doors Bathroom Doors Fashion Small Size Bathroom Bathrooms Dimensions Bathroom Dimensions Bathroom Ceilings Whole Bathroom Bathroom Designs Bathrooms Waterproof Bathroom sliding door
DSPOF is the biggest manufacturer of raw fibre for lighting in the China. Our manufacturing team have years of experience in building, randomising and polishing. This means you can be sure that you are purchasing a top quality product.
There are two general types of harnesses available - end lit or side emitting types.
Harnesses comprise one or more tails (or cables) of fibre optics which transmit the light from the light source over a distance.
Fiber Optic Light Kit,Fiber Optic Led,Led Optical Fiber,Fibre Optic Lighting Kits
Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelights.com