Tip 1 Select Material
Good quality copper material
Ms. Lin from Wangshangpo District, when she was buying a towel rack, heard that the towel racks sold by the store were hysteria. No matter what the material is, the towel racks are good, but she can't tell.
In fact, the material of the towel rack can be roughly divided into four categories: stainless steel materials, copper materials, aluminum alloy materials, and zinc alloy materials. The characteristics of stainless steel towel racks are that the structure is not tight enough and the cost is low; the copper towel racks have a stable structure, are not easily oxidized, and have good gloss and hardness; aluminum alloy towel racks and zinc alloy towel racks are interposed between the two.
To identify the material of the towel rack, use a sharp tool to cut it somewhere. After the opening, the internal white metal is a zinc alloy material; the inside is a golden yellow all-copper material; the aluminum alloy material is soft and easy to cut; the stainless steel material is not easy to cut.
Experts reminded: When identifying the material of the towel rack, businesses generally do not allow customers to chaos cutting on the surface, so as not to affect the appearance of the product. In this case, the base of the towel rack or the inner wall of the towel bar can be cut so that the test effect is achieved without affecting the appearance of the product.
Tip 2 Look at the surface
Electroplating processing stress
The owner of Mr. Lan’s towel rack in Lijiang Village was rusted for only one year. He said that the rusted towel rack had lost its function and it affected the appearance of the bathroom. It was quite depressing. According to reports, when Mr. Lan renovated in July 2007, he purchased the towel rack without knowing the product. After a few months of use, the surface of the towel rack began to bulge, and the plating fell off, eventually resulting in the current situation.
It is reported that due to the damp bathroom environment, the surface of the towel rack must be plated. At present, there are mainly three kinds of electroplating methods such as chrome plating, gold plating and drawing, among which chrome plating is the most widely used one. Before electroplating, the raw material of the towel rack is polished, surface decontamination, etc. to ensure the adsorption stability of the plating layer. The coating thickness is generally calculated in micrometers. It cannot be judged by the human eye, but it can be determined by the glossiness and flatness.
Experts advise: When buying a towel rack, you can observe the surface coating in the light or in a bright light environment to determine its glossiness; in addition, you can use your fingertips to caress the surface of the towel rack to feel its smoothness and whether there are foreign objects protruding. Smooth, flat product quality is better.
Tip 3 Weight
Not as heavy as possible
Referring to the towel racks, Mr. Qu, the owner of the Summer Palace, said he had a feeling of being deceived. Once, he slipped in the bathroom and accidentally broke the towel bar and found that there was filling. When he first bought a towel rack, he felt heavy in his hand and judged that the product quality was good. He did not expect to be passive.
Regardless of the material used for the towel rack, the stems are hollow. Some unscrupulous manufacturers, in order to deceive consumers, fill the hollow towel rail with cement and other items to increase the weight of the product. This is harmful and unprofitable, and the increased weight is not conducive to the stability of the towel rack, which can easily cause loosening of the screws and even cause the towel rack to fall off as a whole. Consumers should not be fooled by the weight of the towel rack when purchasing, so as to avoid losing the weight.
Experts advise: When purchasing, you can open the seal of the towel bar to observe its internal conditions, and the general towel bar sealing is closer. Consumers can also estimate the weight of the towel rack by hand weighing. If the towel rack feels heavy and the price is relatively cheap, consumers should pay more attention to it.
Tip 4 Pick Accessories
Stainless steel accessories
The towel rack in Mr. Seiji District's bathroom appeared to be loose during his recent use. He pulled his hand and pulled the towel rack out of the wall. The original towel rack screws have oxidized and rusted, and can not be effectively fixed in the wall, affecting the normal use of the towel rack. When buying a towel rack, not only the surface, but also the screws, the base and welding details.
It is understood that due to the relatively large humidity and temperature difference in the bathroom, common screws are susceptible to rust under these conditions. Towel racks should be made of stainless steel screws to achieve moisture and oxidation resistance. Copper is a common towel base material. According to different materials, it can be divided into 59 copper (59% copper) and 62 copper (62% copper), such as less than 59 copper , is not in line with national standards. Welding is also a detail easily overlooked by consumers. The welding seam needs to be polished, otherwise the protruding welding seam will not only affect the appearance but also cause inconvenience to the consumers in use.
Experts advise: When purchasing, consumers should not be lightly about the above details, it should be observed whether the welding of the towel rack is polished, beware of non-stainless steel screws and other accessories. The brand towel rack pays more attention to the quality of the small parts, it is recommended to buy a brand towel rack.
The picture shows the stainless steel screws, consumers should carefully identify when buying.
Under light, tilt the towel bar to better observe the gloss of the surface plating.
When buying a towel rack, open the seal of the towel bar and see if there is any filler inside.
The inner wall of the towel bar can be discerned by scissors, and the small picture shows that the cut pieces are golden yellow and can be judged as a full copper material.
Wooden door brand lighting brand bathroom stainless steel aluminum alloy toilet cement stainless steel towel rack
Previous Shower room purchase five major points
Next Six precautions for buying a wooden tub
Towels are a necessity in life, and towel racks are essential for towels. They were developed for the purpose of placing towels and requirements. However, as an accessory in a bathroom, the towel rack has a small footprint compared to a bathtub, a toilet, and the like, and its price is relatively inexpensive. But how do you buy it? Let's look at it together.
Buy Bathroom Towel Holder Notice! ! ! 1. Look at the place of production. In general, Guangdong's products are relatively good. At present, the best domestic electroplating in Guangdong, such as grinding faucet, Kohler and so on. 2. The base, usually made of zinc alloy material. Then there is the use of copper copper, namely 59 copper. 3,
According to the survey, the towel rack materials currently available on the market are mainly divided into four types: copper chrome plating, aluminum oxide, stainless steel, and zinc alloy. Copper chrome towel racks are made of brass. The "rusting" of copper is not the same as the rusting of iron. The "rust" of copper is green, which is what people often call "green". "Plate" is a copper oxide produced by a chemical reaction between copper and oxygen. In order to prevent the contact between copper and oxygen, it is plated with a layer of metallic chromium on the surface, the stability of chromium is very good, and the resistance ...
The bathroom towel rack is a necessary tool for many families nowadays. With the bathroom towel rack, we are very convenient to place towels and wash our face. Towel racks can be used not only to hang towels but also to decorate bathrooms, so people will choose a beautiful bathroom towel rack to decorate the bathroom. Then, the next Xiaobian introduced bathroom towel racks for everyone, hoping to help everyone.
1. Look at the place of production. In general, Guangdong's products are relatively good. At present, the best domestic electroplating in Guangdong, such as grinding faucet, Kohler and so on. 2. The base, usually made of zinc alloy material. Then there is the use of copper copper, namely 59 copper. 3. Accessories, such as screws, etc. Currently, there are several kinds of towel pendants on the domestic market: Characteristics of towel racks on the market: 1. All copper materials are currently mainstream in China, with high grades and high prices. 2,...
submit
As one of the world's largest producers of Pvc floor mats, China can offer competitive prices. Under the scale of our productivity, the labor cost is relatively low, which makes the price of China's Non Slip Floor Mats in the international market has the advantage of being low, which fully meets the demand for economic products in the European and American markets, and our supply chain production capacity can meet large orders and complete a stable and continuous supply, which ensures that the market needs are met.
PVC Floor Mats,Pvc Mats Online,Custom Plastic Floor,Industrial Non Slip Rubber Matting,Kitchen Mats
Jiangyin Yining E-Commerce Co., Ltd , https://www.pvcmatyining.com