The mold is an important process foundation for manufacturing. The high precision, high complexity, high consistency, high productivity, low energy consumption, and low consumables achieved with mold-produced parts make the mold industry more and more important in the manufacturing industry. The more important it is. The level of mold level directly reflects the level of manufacturing industry. Recently, the International Model Association Secretary-General Luo Baihui said that China's mold industry has three major advantages, and it is worth making the manufacturing industry look forward to.
Looking forward to one: to develop commodity molds China's mold industry has developed rapidly in recent years, from 1996 to 2002, China's mold manufacturing industry's average annual output value increased by about 14% in 2003, an increase of about 25% to reach 45 billion yuan*** , About 5 billion US dollars, to the current national mold production and sales value is estimated at 130 billion. However, according to the current situation of China's mold industry, the product structure is not reasonable, most products are low-value products, and molds with high technological content still need to be imported. This shows that although China's mold industry has developed rapidly, but compared with the demand, Demand for supply, the main gap is in the precision, large-scale, complex, long-life mold. The International Model Association Secretary-General Luo Baihui concluded: China's mold output value has been ranked in the forefront of the world, but there are four issues are more prominent. First, the total supply of molds is in short supply, domestic self-provisioning rate is only 70%, among which the supply of medium-low molds is oversupplied, and the self-dispensing rate of medium and high-grade molds is only 50%; Second, the organizational structure, product structure, technical structure, and import and export structure of enterprises are not reasonable. Die manufacturing and manufacturing have not formed an industry. Moulds are only used as auxiliary types of work. They exist in enterprises. Production methods are based on experienced and skilled fitters. They use simple tools to produce and manufacture molds. Most of the factory sites are self-produced and self-provided mold workshops or branch factories. The proportion of self-produced and self-produced products is as high as 60%, and over 70% of foreign products are commodity molds. Third, the capability of mold development is limited, and economic efficiency is not good. The average annual output of the workers is 10,000 US dollars for moulds, and the per capita output value of foreign die countries is 200,000 to 300,000 U.S. dollars. Fourthly, in countries where the automobile industry is more developed, moulds account for 50% to 60% of automobile production, while China Less than 30%, there is still room for improvement in the use of molds.
Expectation 2: The high-tech investment The concept of mold is gradually changing in China. The mold industry has become a technology-intensive and investment-intensive industry. Nowadays, to obtain high-quality, stable performance and high value-added molds, Luo Baihui believes that at least two conditions are indispensable: one is to use high technology; the other is high investment.
Due to the amorphous nature of mold products, single-piece production and dependence on specific users, mold technology has developed to today, the characteristics of high-tech have become increasingly obvious, which is also inseparable with high-tech technical equipment and developed software. The company can only use sophisticated automated CNC technology, advanced CAE, CAD, CAM and other software to ensure its process requirements. Nowadays, the introduction of advanced technologies is basically a technology that has already been commercialized. It can only play a temporary role and the effect is not obvious. Therefore, while introducing technology, competent enterprises must strengthen the secondary development of imported technology, the secondary development can be innovative, the secondary development can be enriched and the technical content can be more practical, and the team can also be trained. High investment refers to the investment in mold production equipment. This is the basis for the upgrading of molds. Because the level of mold production, most of the reasons depend on the level of production equipment. The backward mold production equipment can not produce advanced molds, which also determines the mold manufacturers, in order to produce advanced molds, in order to make the company bigger and stronger, it must constantly update the production equipment.
Expectation 3: The role of leading companies and expert figures Leading enterprises play a leading role in the industry. Their comprehensive information systems and technical level ensure the healthy and smooth development of the industry. However, in China's mold industry, leading enterprises are rare, because for a long time, the preparation of Chinese enterprises has been affected by large-scale, small-scale and full-scale operations. There is a mold production workshop within the company, and the production molds serve their own enterprises. This has caused the mold professional factory to be very few, even if there is a professional mold factory, the scale is not big.
The current manufacturing industry represented by the automotive industry is rapidly developing. The market is in urgent need of large-scale molds with precision and stable performance. The industry association expects more leading companies and mold experts to play their part. Large-scale mold companies such as FAW Mold Manufacturing Co. are working hard to drive the development of the industry. . At the same time, the development of the mold industry, in addition to relying on the industry, more need to improve the national policy, corporate management and production materials and other mechanisms. In recent years, the rapid development of the mold industry is expected to see the overall level of China's mold as soon as possible with the world mold level.
Looking forward to one: to develop commodity molds China's mold industry has developed rapidly in recent years, from 1996 to 2002, China's mold manufacturing industry's average annual output value increased by about 14% in 2003, an increase of about 25% to reach 45 billion yuan*** , About 5 billion US dollars, to the current national mold production and sales value is estimated at 130 billion. However, according to the current situation of China's mold industry, the product structure is not reasonable, most products are low-value products, and molds with high technological content still need to be imported. This shows that although China's mold industry has developed rapidly, but compared with the demand, Demand for supply, the main gap is in the precision, large-scale, complex, long-life mold. The International Model Association Secretary-General Luo Baihui concluded: China's mold output value has been ranked in the forefront of the world, but there are four issues are more prominent. First, the total supply of molds is in short supply, domestic self-provisioning rate is only 70%, among which the supply of medium-low molds is oversupplied, and the self-dispensing rate of medium and high-grade molds is only 50%; Second, the organizational structure, product structure, technical structure, and import and export structure of enterprises are not reasonable. Die manufacturing and manufacturing have not formed an industry. Moulds are only used as auxiliary types of work. They exist in enterprises. Production methods are based on experienced and skilled fitters. They use simple tools to produce and manufacture molds. Most of the factory sites are self-produced and self-provided mold workshops or branch factories. The proportion of self-produced and self-produced products is as high as 60%, and over 70% of foreign products are commodity molds. Third, the capability of mold development is limited, and economic efficiency is not good. The average annual output of the workers is 10,000 US dollars for moulds, and the per capita output value of foreign die countries is 200,000 to 300,000 U.S. dollars. Fourthly, in countries where the automobile industry is more developed, moulds account for 50% to 60% of automobile production, while China Less than 30%, there is still room for improvement in the use of molds.
Expectation 2: The high-tech investment The concept of mold is gradually changing in China. The mold industry has become a technology-intensive and investment-intensive industry. Nowadays, to obtain high-quality, stable performance and high value-added molds, Luo Baihui believes that at least two conditions are indispensable: one is to use high technology; the other is high investment.
Due to the amorphous nature of mold products, single-piece production and dependence on specific users, mold technology has developed to today, the characteristics of high-tech have become increasingly obvious, which is also inseparable with high-tech technical equipment and developed software. The company can only use sophisticated automated CNC technology, advanced CAE, CAD, CAM and other software to ensure its process requirements. Nowadays, the introduction of advanced technologies is basically a technology that has already been commercialized. It can only play a temporary role and the effect is not obvious. Therefore, while introducing technology, competent enterprises must strengthen the secondary development of imported technology, the secondary development can be innovative, the secondary development can be enriched and the technical content can be more practical, and the team can also be trained. High investment refers to the investment in mold production equipment. This is the basis for the upgrading of molds. Because the level of mold production, most of the reasons depend on the level of production equipment. The backward mold production equipment can not produce advanced molds, which also determines the mold manufacturers, in order to produce advanced molds, in order to make the company bigger and stronger, it must constantly update the production equipment.
Expectation 3: The role of leading companies and expert figures Leading enterprises play a leading role in the industry. Their comprehensive information systems and technical level ensure the healthy and smooth development of the industry. However, in China's mold industry, leading enterprises are rare, because for a long time, the preparation of Chinese enterprises has been affected by large-scale, small-scale and full-scale operations. There is a mold production workshop within the company, and the production molds serve their own enterprises. This has caused the mold professional factory to be very few, even if there is a professional mold factory, the scale is not big.
The current manufacturing industry represented by the automotive industry is rapidly developing. The market is in urgent need of large-scale molds with precision and stable performance. The industry association expects more leading companies and mold experts to play their part. Large-scale mold companies such as FAW Mold Manufacturing Co. are working hard to drive the development of the industry. . At the same time, the development of the mold industry, in addition to relying on the industry, more need to improve the national policy, corporate management and production materials and other mechanisms. In recent years, the rapid development of the mold industry is expected to see the overall level of China's mold as soon as possible with the world mold level.
Highbay Lights,Led Ufo High Bay Light,Led Ufo High Bay Lamp,Ufo High Bay Lamp
Top Lighting International (HK) Co., Limited , https://www.topled-group.com