RY air-cooled high-temperature heat transfer oil pump is an ideal hot oil circulation pump or as a heat transfer pump, heat exchange equipment is the ideal matching pump. RY air-cooled high-temperature heat transfer oil pump structure is reasonable, excellent performance, reliable use. Suitable for conveying high temperature liquids without solid particles. RY air-cooled high-temperature heat-conducting oil pump corrosion resistance and temperature depends on the material in contact with the main parts of the media (divided into three categories: 1.HT200; II.ZG phone; III.1Cr18Ni9Ti, OCr18Ni12-Mo2Ti). RY air-cooled high temperature thermal oil pump RY air-cooled high temperature thermal oil pump is advanced technology, high efficiency, long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, in China's heat carrier Heating system has been widely used, RY air-cooled high-temperature heat transfer oil pump has entered the petroleum, chemical, rubber, plastics, pharmaceutical, textile, printing and dyeing, roads, food and other industrial areas, mainly for the transport of solid particles Weakly corrosive high temperature liquid, the use of temperature ≤ 370 ℃, is an ideal hot oil circulating pump. RY air-cooled high-temperature heat-conducting oil pump structure RY air-cooled high-temperature heat-conducting oil pump using self-heating cooling structure, changing the traditional water cooling structure, so that the simple structure, small size, cost savings, good performance, reliable use, Digestion and absorption of foreign oil pump developed on the basis of the second generation of products, RY air-cooled high-temperature heat-conducting oil pump for the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet axial suction, the export vertical center up, and The motor is mounted on the base. RY air-cooled high-temperature heat-conducting oil pump support structure using double-ended ball bearing support structure, the front end is lubricated with grease, the rear end with grease lubrication, the middle of a guide tube to observe the sealing and recovery of thermal oil. RY air-cooled high-temperature heat-conducting oil pump seal features RY air-cooled high-temperature heat-conducting oil pump with a combination of packing seal and mechanical seal, packing seal with high temperature filler, has good thermal adaptability, and mechanical seal is the use of machinery High strength, good wear resistance of cemented carbide materials, to ensure that the RY air-cooled high temperature heat transfer oil pump sealing performance under high temperature. RY air-cooled high temperature thermal oil pump performance range (according to the design point) 1, flow 1-500m3 / h; 2, lift 10-125m; 3, temperature -20 degrees -350 degrees;
Home Elevatoe,Ascensor lift,Elevator Bim,Residential Elevators
MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com