Colorful EPDM/PP Based Thermoplastic Elastomer Raw Material TPV

  • Model NO.: 6000
  • Plastic Properties After Heated: Thermoplastic Plastics
  • Color: White
  • Trademark: Pacrel
  • Origin: China
  • Material: TPV
  • Plastic Forming Method: Extrusion
  • Process: Injection, Extrusion, Blow Molding
  • Transport Package: 25kg/Bag
  • HS Code: 4002991100
Pacrel ® TPV 6000
Pacrel ® TPV is a Vulcanised Thermoplastic Elastormer. It is made up of an elastomeric phase (dynamically vulcanised EPDM), which is deeply dispersed in a polyolefinic thermoplastic matrix, whose combination determines a real plasto elastomeric alloy characterised by high performances and extremely easy processability. Its thermoplastic matrix allows Pacrel ® TPV to be processed in an easy and unexpensive way by means of traditional technologies used for thermoplastic materials and to be fully recyclable whereas its elastomeric phase features typically rubber-like specifications such as elastic recovery and softness.
 
Applications: seals and gaskets, hand grips, auto parts, wire and cable sheath/ connector, transportation expansion joint, electric and electronical products and so on.
 
Colorful EPDM/PP Based Thermoplastic Elastomer Raw Material TPV
 Main specifications:
Wide hardness range, from Shore40A to 95A (50D)
Typical density <0.96 g/cm3
High elastic recovery within a wide temperature range
Excellent resistance to UV aging and ozone
Service temperature ranging from -60 to 135°C
Excellent resistance to several chemical agents
High fatigue resistance
High thermal and electric insulation values
Heat adhesion on polypropylene (PP)
Excellent colorability
 
Colorful EPDM/PP Based Thermoplastic Elastomer Raw Material TPV
Process: Can be processed through typical thermoplastics technologies, such as injection-molding, extrusion, blow-molding, calendering and over-molding. Normally Pacrel does not require drying before processing, apart from some special grades.
 
Recycling: Can be completely recycled and reused after regrinding.
The user shall always verify that the compound obtained by mixing virgin and reground material is suitable for the specific application and meets the requirements. 
  
Storage: Should be stored in a covered facility and kept away from moisture and heat.

Certifications: 

Colorful EPDM/PP Based Thermoplastic Elastomer Raw Material TPV
 

Elevator Traction System

The function of the elevator traction system is to output and transmit power to drive the elevator. It is mainly composed of traction machine, traction wire rope, guide pulley and reverse sheave. The towing machine provides power for the operation of the elevator, which is composed of motor, towing wheel, coupling, reducer and electromagnetic brake. Both ends of the pulling wire are connected to the lift car and counterweight respectively, and the lift car is driven up and down by the friction between the wire rope and the pulling wheel. The guide wheel is used to separate the space between the lift car and the counterweight. The use of compound winding type can also increase the drag force. Professional Elevator Traction System manufacturer is located in China, including Traction Elevator System,Traction Lift System,Traction Elevator, etc.

Elevator Traction System,Traction Elevator System,Traction Lift System,Traction Elevator

Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com