Copper-aluminum composite radiator

Copper-aluminum composite products have good corrosion resistance. This type of radiator is corrosion resistant and adaptable. However, some products have not been compounded by two materials. Only copper pipes are added to aluminum products. Experts recommend buying brand products, and the relative quality is guaranteed. In addition, the copper-aluminum composite radiator "slim and flat" type of radiator saves space, but because the higher radiator requires greater water pressure, the household heating boiler is difficult to meet the requirements, therefore, household heating It is best for families not to choose radiators of this type.

How to choose the radiator how to choose the radiator? How to choose the radiator for home decoration, how to choose the heating system for the radiator. If the home is for central heating, the horizontal radiator should be installed under the window to block the intrusion of cold air. If the vertical radiator should be installed on both sides of the window, the radiator can be close to the ground. The air convects, so the room temperature is balanced. How to choose the radiator for the gas boiler system and the pressureless system, the pressureless coal-fired heating system should choose the radiator height not to exceed 1500, it is best to have the radiator of about 600 high effect, so the water flow is fast, the radiator The heat dissipation effect is good. The height of the gas boiler system should not exceed 1800. If the water temperature is high, the radiator with small water capacity can be considered. If the water temperature is lower than 60 degrees, steel should be used, so that as long as there is water temperature, heat can be dissipated.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com