| Home>Bearing knowledge>Difference between oscillating bearing and normal bearing |
Difference between oscillating bearing and normal bearing
Source: Bearing network time: 2013-03-20
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
A. The diameter of the roll body is increased; the length of the roll body is increased.
B. Hold the frame by the outer ring rib to guide the roller; reduce the force on the roller.
C. Use the inner ring rib to guide the roller; improve the roller operation.
D. The cylindrical roller bearing adheres to the frame with an integral layout; the strength is greatly improved.
E. The outer diameter of the aligning bearing is depicted with oil groove oil hole; smooth effect is good.
Usually bearings:
A. The roller body diameter and the roll length are both small.
B. Stick to the roller or inner ring guide.
C. The cylindrical roller bearing adheres to the rivet layout; it is easy to loosen and cover.
D. The outer diameter of the aligning bearing has no oil groove oil hole; the smoothing effect is poor.
2. Select the special bearings for data oscillation:
A. The inner and outer rings and the rolling body are made of vacuum degassing bearing steel; the fatigue resistance is good.
B. Adhere to the selection of aluminum iron manganese bronze data; high strength; good elasticity; better wear resistance.
Usually bearings:
A. The inner and outer rings and the rolling body are usually made of bearing steel.
B. Adhere to the selection of zinc brass raw materials; low strength; poor elasticity.
3. Heat treatment method for oscillating special bearings:
A. The inner and outer rings are selected from Bay-Machine mixed quenching or Martens quenching + high temperature tempering; the hardness is uniform; the internal stress is è— èŒ«è±¢ 茫豢 茫豢 寤骱 寤骱 寤骱 寤骱.
B. When working within 150C temperature; good stability.
Usually bearings:
The inner and outer rings are usually quenched; the resistance is poor; the impact resistance and oscillation function are poor; the thermal stability is not good.
4. Special bearings for public service and production process oscillation:
A. Strictly produced according to P6 precision specifications; special inner and outer diameter public service is very small.
B. The roll scales are different from each other ≤ 0. 002
C. The outer diameter of the cylindrical roller has a convexity; it prevents stress from collecting.
D. Tumbled surface super fine treatment; high finish.
Usually bearings:
A. Usually PO level precision public service (some P6 level specifications) production.
B. Roller grouping ≤ 0. 005.
C. Cylindrical roller without convexity practice.
D. Some raceways are only polished; the finish is low.
5. Special bearings for internal clearance oscillation:
The clearance is produced according to the demand of the oscillating machinery; the scale control is on a small scale; the consistency is good.
Usually bearings:
The play is usually produced according to the specification group or the C3 group; the clearance or the 蚴 段 螅 螅 螅 肷 (12) source.
6. Use special bearings for action oscillation:
Low noise; temperature rise. 榷ã„院茫皇褂 倜ム倜ム倜ム缙谄 缙谄 窒 窒 @ drag 窒.
Usually bearings:
High noise; elevated temperature; poor stability; short service life; early fatigue appearance.
Recommend to friends comments close window
| Bearing related knowledge |
| The "detection and problem elimination" method in the bearing operation process The microscopic defects and microscopic defects of rare earth ceramic bearings in SKF bearings, how to disassemble SKF outer spherical bearings The application of KOYO bearings and the challenges of cooperation with the needs of the door |
This article links to http://
Please indicate China Bearing Network http://
Previous: Bearing product-thrust tapered roller bearing Next: Detailed analysis of bearing damage
Roofing/Heating/welding torches
Long Handle Heating Torch,BBQ LPG Flame Gun,Wholesale Long Gas Torch
Shangqiu Zhengtu Hardware Technology Co,.Ltd , https://www.zlztlighter.com