Durable solid wood flooring, not only by its own material, on the other hand the quality of its paving is also an important factor affecting the life of solid wood flooring, and the problems in the use of the floor are mostly caused by improper paving , The following to share the solid wood floor pavement need to pay attention to what misunderstanding.
Solid wood floor pavement common misunderstanding 1: no inspection of wood keel
The unevenness of the ground caused some floors and wooden keels to hang, and the floor was easy to make noises. If the wood keel is not firm, it is easy to produce the same situation, so be sure to check the wood keel after it is finished. You can step on the wooden keel with your feet and check if the wooden keel is firm by shaking your feet.
Solid wood floor pavement common misunderstanding 2: Floor can be directly paved
After paving the first row of floors, the installer should pull the straight line to measure the level. If it needs to be adjusted immediately, it will affect the laying of the back floor. After laying, it is better to take the ruler upright on the floor to see if there is any Gap.
Solid wood floor pavement common misunderstanding 3: wood keel can be done directly
Undried wood keel moisture content is usually around 25%, while the qualified wood flooring moisture content is generally 12%, the humidity difference is too large to make the wooden floor absorb moisture quickly, causing the floor to arch, paint burst. It is the usual practice of the current decoration team to lay the floor first and then perform other construction on the floor. Remind everyone that after the floor is laid, it often takes a month or more before it can be polished. During the period, there were no isolation measures for water vapor and chemicals on the floor and surrounding environment, which may cause the wooden floor to be deformed and cracked due to the rapid change in water content. The solid wood flooring has good log properties and is prone to worms. Therefore, it is necessary to put swarf into the wooden keel. The standard is to put one kilogram of smashed wood chips per 8 square feet, and be careful to put it evenly.
Solid wood floor pavement common misunderstanding 4: in the mall can be selected on it
The color of each solid wood floor will be different, so you should pick out the floor with similar color and texture before the formal laying, so that there will not be big differences in the overall pavement effect. It should be noted that when the floor enters the yard, it is best to check the quality of the floor by hand, visually, and find and replace any problems in time.
Moisture-proof mat laying pays attention to avoid water and gas on the wall “infected†to the solid wood floor. When laying the moisture-proof pad, not only must cover the entire wooden keel, but also pay attention to keep the moisture-proof pad up to about 10 cm along the corner of the wall. At the same time, expansion joints should be left between the wooden floor and the wall. If it is put too close, the floor will bulge easily after expansion. Synthesis
Solid Wood Flooring Pavement Misunderstanding 5: Fixing with a wooden wedge and nails
The use of wood wedges and nails in the construction method will cause the nail holding force to be insufficient due to the small contact surface between the wood wedge and the nail, which can easily cause the wooden keel to loosen and cause a sound when stepping on the floor.
Solid wood floor pavement common misunderstanding 6: assembly too loose or too tight
As the temperature and humidity of the environment changes, wood flooring will expand or shrink. Therefore, when laying floors, it is recommended that the tightness of the wood floor be properly arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction. When it is too tight, the floor will arch when it expands.
Acceptance of small moves: acceptance do not forget to check
Acceptance work is the key to checking whether or not the floor installation is qualified. The acceptance process cannot be sloppy and must be implemented in every detail so as to provide a strong guarantee for our floor durability. General floor inspection can do four checks.
Check the flatness, to see whether the floor arching phenomenon, which is a serious quality problem; 2 check the floor is loose, if the floor is loose and easy to ring; 3 check the floor color, the color difference will affect the appearance, but if there is almost no color, may It is a craft wood floor; four check gaps, the floor gap is too large or too small will affect the pavement effect, easy to occur arching phenomenon.
The floor looks like it is very simple to install, but the inside doorway is really a lot. So we still understand ahead of time to avoid being pitted.
Solid wood floor natural floor del floor paint
tape measures for sewing,best tape measures,tape measures for sale,tape measures at screwfix
Shangqiu Zhengtu Hardware Technology Co,.Ltd , https://www.zlztlighter.com