In the past year or two, because of the lead in the lead, everyone is paying more attention to the health of domestic water. In fact, in addition to the material quality of the faucet itself, its installation and daily use have a great impact on our water health. Little people have never noticed...
Most families, regardless of space and usage requirements, only bought many faucets of the same kind to install on the house. It is unscientific. At least one family can be equipped with three types of faucets: single cold, cold and warm, and foaming.
1. At least three different types of space to install the faucet
According to the purpose of the faucet, it can be divided into a basin, a kitchen basin, a bathtub, a washing machine and a mop pool faucet. In terms of function and structure, it can be divided into a single cold type ordinary faucet, a sensor faucet, a heating and cooling faucet, and a belt. The water-saving faucet of the bubbler, etc., the basin, the kitchen basin and the bathtub faucet are generally of the type of cold and warm type and the type of bubbler. The washing machine and the mop pool faucet can be used for single-cooling, and the balcony and other places are generally not recommended. The faucet of the bubbler can not only speed up the washing and dragging, but also increase the scouring ability, but it also has a certain water saving effect.
Many people think that it is okay to buy a hot and cold faucet at home but only connect one water inlet hose. In fact, the ceramic valve core is a three-port inter-connecting structure, and the water from the two inlet hoses is mixed before the faucet outlet Outflow, only one water pipe hot and cold water faucet will be unable to use, many people are unclear, so I thought it was the quality of the cold and hot control is not good, if it is not good, there will be water flooding Jinshan.
2. The hot and cold water tap cannot be directly connected to a water pipe
The hot and cold water taps use different opening angles on both sides of the ceramic valve core to control the mixing ratio of the hot and cold water to achieve the water temperature adjustment function. If your home does have only one cold water pipe and buy a hot and cold water tap, it is recommended that you can pick it up at the same time. The upper two inlet hoses, then one is connected to the angle valve, and the other is blocked with a wire plug.
Many people know that they have to install a faucet, but they don't know how to install an angle valve. The angle valve outlet is at a right angle of 90 degrees to the water inlet, which can be used to connect the inner wall water pipe and faucet hose and control the water flow switch.
3. The faucet and water pipe link must have an angle valve
Any hot and cold faucet (with hot and cold water inlet hose) must use the angle valve to connect with the water pipe, and like the washing machine faucet, mop pool faucet and other quick opening faucet, can be directly connected with the water pipe, so no angle valve is needed. Generally speaking, each hot and cold faucet needs two angle valves to match each other. In case of leakage of the faucet, it is only necessary to close the angle valve, and it will not affect the water in other places in the home.
How long has the faucet in your home not been cleaned?? Although we use taps almost every day, few people pay attention to the surface of the faucet and even the interior.
4. The appearance and interior of the water dragon should be cleaned regularly.
After installing the faucet, the smudge fingerprint on the surface is recommended to be cleaned every other month. Use a clean water to clean the surface with a soft cloth. The appearance of the brightness can be cleaned once a month with the car wax. The cleaning of the surface is for aesthetics, and internal cleaning is the most important factor affecting the service life.
In addition, if the faucet has a reduced water volume or a water fork, it means that the faucet's bubbler is clogged. At this time, the bubbler should be removed, soaked in vinegar, and cleaned with a small brush or other tools. Then reinstall it.
Most people are accustomed to use it in the morning to unscrew the faucet, but in general, before using the faucet the next day, it is generally necessary to let the water accumulated in the faucet overnight and then use it.
5. The tap can not be used immediately
For the faucet, people are "smelling lead discoloration". In fact, no matter how good the faucet is, it is difficult to avoid more or less lead element precipitation pollution, but in general, due to the role of the lead protective film inside the faucet, its content is greatly Reduce to the standard level.
However, the water in the long-term retention faucet will cause the lead protective film to fall off, and the lead element will precipitate after being dissolved in water. In particular, traditional faucets and water pipes are more likely to rust and pollute the water, so it is necessary to first drain the yellow water stored in the pipe when using it early. Stainless steel faucets are relatively healthy in terms of product selection, but at a higher price.
The house has been bought, and the decoration is good. For everything in the house, in addition to large items such as home appliances, many things will be used for ten years and decades, so we will pay attention to the quality of household products, but like faucets. Products, even if they have been used for many years, are not bad, you should replace them with updates, because the faucet time will have different degrees of rust after a long time.
6. Big-name faucet for five years, change the brand, change one year
For brand faucet products with good reputation, it can be changed in five years. If it is a faucet product with relatively small or no brand guarantee, it is recommended to change it every year. For non-drinking faucets such as laundry, it can be used for a long time. It doesn't matter much at all, and it has to be changed in 6-7 years.
Drinking water and water can control the lifeblood of our daily life. If you want to protect your water health in your daily life, you should pay more attention to the details of the installation and use of the faucet, and fundamentally avoid the source of injury.
Concerned about surprises
Tags: faucet use literacy: 6 big mistakes, how many have you committed?
Previous: The bathroom decoration is designed to be safe for the future. Next: The most common type of putty is the most environmentally friendly?
Lemon aluminium windows series:
Lemon's windows are inspired by practical functional and design that people want. They are designed, manufactured and crafted to bring a sense of quality to every building and provide uncompromising daylighting and ventilation. We offer industry-leading sizes, and our windows are energy efficient, easy to install and deliver endless style options. Lemon's windows are crafted with the highest quality materials in the industry and support private custom styles. The design and function are perfectly adopted to residential, commercial, replacement and coastal needs.
Painting Aluminum Windows,Black Aluminum Windows,Powder Coated Aluminum Windows,Aluminum Windows And Doors
Lemon Building Material Co., Ltd. , https://www.lemonbuilding.com