Four criteria for choosing bath towels

After bathing, how comfortable it is to wrap your baby and yourself with an oversized bath towel. Do you know? Choose a bath towel and learn.

Thick and light

The thick bath towel is absorbent and warm when wrapped around the body. But if it is too heavy, it will make people feel awkward when cleaning. Not easy to lick, not easy to dry. So choose a thick and light towel.

Suya

Plain bath towels are generally not dyed during processing. If there is a printing and dyeing process, choose those bath towels that are environmentally friendly and are not dyed with any additives. Plain-colored bath towels can also be used to woven beautiful patterns with cut velvet, flawless, jacquard and other techniques, which is not lacking in elegance.

Solid and fine

A good bath towel is strong but should not be rough. Look at the side-by-side work of the bath towel and whether the trademark has been hidden in the joint, you can judge that the bath towel you are looking for is not enough "fine".

Soft and dense

Look at the material on the label when shopping. The raw materials used for good bath towels are generally fine combed fine cotton or long-staple cotton. Although the cost is high, the bath towel thus woven is dense in texture and soft to the touch. Because bath towels often require high temperature sterilization and washing, bath towels that are made from heat-resistant plant fibers are selected.

Water well Hole Opener , steel tooth cones hole opener ,hole opener withTCI Tricone Bit cutters, tricone bit legs hole opener, hole opener bits,expanding hole opener features 

Drillers always drill a smaller hole at first, then enlarger it with hole opener, it is a type of regular drilling technology when the drilling machine is lower power or the end-hole is too big

We can make the hole opener and solutions according to the hardness of rocks, drilling depth, size of pilot hole, size of end-hole

If fix the tricone bits as the pilot bits, the hole opener will be a rock bits, hole opener with tricone bits as pilot bits is always applicable in special sizes well drilling .The reamer mainly consists of four or more cones

Cutting structure with premium tungsten carbide hard facing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistant capability of reamer

Water Wells Hole Opener Operational Considerations
Drilling Weight - The choice of drilling weight is determined based on the recommendations of the bit manufacturer and the number of cutters on the hole opener.
Number of Cutters - The number of cutters placed on a hole opener is governed by the following facts:

• Maximum number which will fit around the perimeter.
• The greater the number of cutters, the less the weight, which therefore reduces the penetration rate.
• In softer formations, less weight is needed to penetrate.
• The greater the number of cutters, the smoother the tool will run.
• The greater the number of cutters, the greater the cost.
• The greater the number of cutters, the longer the cutters will last

Hole Cleaning - A frequently over looked point of hole opener operation is hole cleaning. The volume of cuttings to remove from a hole increase by a squared factor with an increase in hole diameter.

Steel tooth cones hole opener picture 

TCI cones bit hole opener 

Water Wells Hole Opener

Water Wells Hole Opener,Oil Water Well Hole Opener,Oil Well Replaceable Hole Opener,Hole Opener For Water Well Drilling

Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , http://www.welldrillingbit.com