In this growing era, the suction truck has gradually entered our lives, in order to enable more friends to understand the operation method of the suction operation of the small suction truck. In this increasingly developing era, the suction truck is gradually Into our life, in order to enable more friends to understand the operation method of small suction truck suction operation, here Hengjie Sanitation Equipment Co., Ltd. will give you a brief introduction, as follows:
1. In order to clean the manure more, the small suction truck should insert the waste pipe as deep as possible to ensure that the pipe end is always below the liquid level of 300mm during the operation.
2. The small suction truck pushes the four-way valve handle to be perpendicular to the ground.
3. The small suction truck hangs the transmission into the neutral gear, then starts the engine, separates the clutch, pulls the power take-off switch back and pulls the gear to take the force, and the vacuum Pump starts to run.
4. The small suction truck opens the cab kit, pulls out the alarm switch, and turns on the power.
5. The operator of the small suction truck can know the height of the liquid level through the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver needs to be notified at this time to quickly pull the suction hose off the ground or Close the four-way valve.
6. Under the general circumstances, the small suction truck will emit sound and light signals after the above situation occurs. At this time, the driver should receive the signal to reduce the throttle, push the power take-off switch forward and disengage, and the vacuum pump stops moving. Press the signal switch and turn off its power.
7. The small suction truck will close the fuel tank straight through the rotary arbor plate parallel to the axis of the mailbox.
8. After the small suction truck flushes the hose, put it back into the walking box, close the side door and make the boom face the cab.
9. The small suction truck closes the anti-overflow valve so that its handle is perpendicular to the axis of the road.
10. The small suction truck leaves the operation point.
Through the above introduction, I hope to help your small suction truck operation. If you have any other questions or suggestions, please call us!
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Oil drilling equipment includes various kinds of oil drill strings and Oil Drilling Tools, such as drill bits, drill collars, drill pipe, elevator links, spinning wrenches, drilling casing slips, drilling manual tongs, and more. Being highly reliable and safe, the petroleum equipment is widely used in the oil industry.
Rugao Yaou Company is an experienced oil drilling equipment manufacturer in China. We have been awarded the certificate of the American Petroleum Institute (API). We are mainly engaged in manufacturing and supplying a wide range of oil drilling equipment, such as well cement tools, workover tools, oil production tools, solid control equipment, and so on. In addition to petroleum equipment, we also offer a diversity of shearing machines, Hydraulic Press brakes, rolling machines, and hydraulic presses. Featuring high quality and low prices, our products are in increasing demand in many countries, like Russia, Germany, America, Egypt, Turkey, Thailand, Singapore, Australia, Brazil, just to name a few.
Mud Solids Control Equipment,Blowout Preventer Control System,Drilling Rig Operating System Equipment,Petroleum Instrumentation
Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com