Ceiling light is a lamp that is used very high in home life now. It can be seen in the bedroom, aisle, and kitchen. Not only beautiful, but also brings a comfortable atmosphere for home life. A friend asked, how do you install ceiling lights ? How to choose the ceiling lamp correctly? Next, let's take a look at how to install the ceiling lamp .
How to install ceiling lamp :
1. Disassemble the purchased ceiling lamp package, remove the little thread from the lamp base, and take out the lamp.
2. Then place the base in the position to be installed, draw the position of the hole, and drill holes in the corresponding holes of the ceiling.
3. Inject gel into the smallpox where the ceiling is good, and fix it with screws. Then attach the lamp base and tighten the screws.
4, careful wiring to avoid loosening, and then install the lamp, lampshade cover, and you're done. At this time, you can try to see if the light will shine normally.
Ceiling lamp installation notes :
1. When installing, be sure to turn off the power and maintain personal safety.
2. The two thread ends connected with the ceiling lamp power supply must be wrapped with black tape and keep a certain distance so as to avoid short circuit and danger.
3. If the ceiling lamp uses a screw, it is recommended that the phase wire be connected to the center contact terminal and the neutral wire should be connected to the screw terminal.
4. When installing ceiling lamps in masonry structures, pre-embedded bolts or expansion bolts must be used, and wooden wedges must not be used. It is also necessary to ensure that the ceiling material matches the capacity of the ceiling lamp.
How to choose the ceiling lamp correctly :
1, detection light source
Most of the ceiling lamps in the market are white, and some owners will find that some ceiling lamps look brighter when they are selected, and some are darker. This is caused by the different light sources and different color temperatures. Some light sources produced by small manufacturers have very low luminous efficacy. In order to make customers look brighter, the color temperature is raised, which looks brighter. However, it is very harmful to the eyes, and vision will become worse and worse under such circumstances for a long time. It is recommended that you focus your hand on the side of the light source to see the color of your palm. If it is ruddy, it means that the color temperature is just right. If the palm of your hand is blue or purple, the color temperature is too high.
2, see the electrical
As we all know, all light sources must have ballasts to light, ballasts can bring instantaneous starting voltage and stable voltage to the light source, and the quality of the ballast directly determines the life and light efficiency of the lamp. , It is recommended to choose the ballasts produced by regular manufacturers, the quality is more secure.
3, look at the mask
Common materials for lampshades on the market include: acrylic, plastic, and glass. In general, the transparency of plastic masks reaches up to 60%, while acrylic can reach more than 90%. If the mask of glass is not firmly installed, it will cause potential safety problems. Therefore, it is recommended that you choose acrylic shades better.
Conclusion: The above is to introduce the relevant content of how to install ceiling lamps , hoping to help everyone in the purchase. The styles and brands of ceiling lamps are diversified. It is recommended that you choose the best brands when you purchase them. This guarantees both quality and after-sales services.
Key Feature of led underground lamps
Housing: Die-casting aluminum housing; stainless steel faceplate, corrosion-resistance coating; remarkable ventilation and heat radiation.
304 or 316 stainless steel material panel, superior quality, impact resistance and corrosion resistance.
Embedded parts: Aluminum alloy
Protection grade: IP67
Rated Power: 1-50W
Color Temperature: R,Y,G,B,W,WW, a variety of colors for you to choose.
CRI:>80(white)
Efficiency: 80lm/W (white)
Control: on/off /DMX512/Controller
Beam Angle: 8°/12.5°/20°/30°/ 45°/60°/15*30°/10*60°
Operating Temperature: -25℃-50℃
Life span: 50000h
Warranty: 2 years for whole light
|
Model
|
DC 12 24V A
|
C 85-265V
|
|
LED Brand
|
CREE
|
EPISTAR
|
|
LED Quantity
|
1-36PCS
|
OEM ODM
|
|
Rated Power
|
1W 3W 5W 7W 9W 12W 15W
|
14W
|
|
Input Voltage
|
DC24V/AC100-240V,50/60Hz
|
|
|
Color Temperature
|
RGB/Single
|
RGB/single
|
|
Beam Angle
|
5°/8°/12.5°/20°/30°/ 45°/60°/15*30°/10*60°
|
|
|
Contrl Mode
|
DMX512/CC
|
DMX512/CC
|
|
Protection Grade
|
IP67
|
IP67
|
This underground floor lamp has a very wide range of applications, and you can install it in swimming pools, ponds, pools, fountains and other places. It can also be installed in gardens, squares, bridges, streets and other outdoor areas to achieve decorative effects.IP65 Waterproof floor recessed lights deck inground spotlight outdoor landscape ground buried lamp led underground light
Led Inground Light,Waterproof Underground Light,Outdoor Led Inground Lighting,Led Waterproof Underground Light
Shenzhen You&My Electronic Technology Co., Ltd , https://www.youmyledlight.com