How to prevent dehydration in the decoration

How to prevent dehydration in the decoration

Once the temperature and humidity in the room change greatly, some problems such as cracking, warping and deformation occur. Most of these quality problems are in the moisture content of wood products.

Whether it is material or not, all wood products contain a certain amount of moisture. Many people think that the more dry the wood, the better. In fact, this view is biased. The moisture content of wood can only be maintained within the normal range to ensure that there is no quality problem in the decoration. For wood materials used in general households, the moisture content should be around 8%. If the moisture content is too high or too low, it will cause quality problems in the wood in the home improvement.

In order to keep the moisture content of the wood stable, you should pay attention to the following points in the decoration:

1, more use of artificial plates

Compared with solid wood materials, the texture properties of various artificial boards are much more stable. Because the solid wood material has a texture, when the temperature and humidity change greatly, cracking, warping, and deformation will inevitably occur. The wood-based panel is to split the wood into wood chips, and then re-plate. Because the original physical structure of the wood was broken, when the temperature and humidity changed greatly, the "deformation" of the wood-based panel was much smaller than that of the solid wood.

2, construction attention to detail

In the middle, the key to the quality of wood is construction, especially the details: After all the wood products are installed, they must be carried out immediately. This layer of paint, known as the "cover," not only protects the wood products, but also acts as a barrier to moisture and maintains the normal moisture content of the wood; the binder cannot be drowning.

At present, in home decoration, binders for white wood product joints are generally used. Some workers dip water in white latex in order to cut corners. Not only does this reduce the strength of the binder, but after the wood product absorbs moisture, it is prone to quality problems; all the wood is left for a few days. After you purchase the wood for decoration, it is best to put it on the decoration site for a few days before use. The purpose of doing so is to make the moisture content of wood close to the level of new homes.

3, beware of buying materials

When you purchase wood for decoration, it is impossible to determine the moisture content of the wood with only your eyes and hands. So someone sighed: If you only rely on appearance inspections, the moisture content of wood can be described as “divine and difficult to distinguish”. In fact, there are some tips that can help you determine if the moisture content of the wood is acceptable. The characteristics of dry wood are generally obvious, the weight is significantly reduced, the feel is not cool, the sound of knocking is crisp, the sound of “squeaking” sounds when the planer is pushed, the wood shavings are heated, and the planer is light. The wood material with high moisture content has a heavy body, a cold feel, and is not brittle when pushed by a planer, and even the shavings produce water. This type of wood cannot be used.

Decoration construction knowledge plate decoration materials knowledge family decoration home decoration paint

LED GU10 Spot Light

LED GU10 Spot Light,LED dimmable spotlight,Led Spotlight,Standard LED spots GU10

Foshan Extrlux Co., Ltd. , https://www.extrlux.com