I and H Shaped Aluminium/Aluminium Beam Profile

I and H Shaped Aluminium/Aluminium Beam Profile

(1). Suitable for advertising board and so on.

(2). 20 years warranty.

(3). High corrosion resistance.

(4). 5-10 years weather resistance.

(5). Good wear resistance & anti-scratch.

(6).Size customized.

 

Our Advantages


More Products



Packing




 

Q1: What's the thickness for anodizing? Can you do 15um?

A: Our normal thickness is about 10 um. Yes, we can do 15um and above.

 

Q2: What color you can do for powder coating? The thickness for powder coat?

A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.

 

Q3: What color you can do for wood grain?

A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.

 

Q4: How's the weather resistance for wood grain finish D1010?

A: (1). Powder: Akzo Noble Interpon D1010.

(2). Wood grain film: Italian Menphis.

(3). Standard complied: American AAMA Standard.2603

(4). UV test:1000 hours.

(5). Salt spraying test:1000 hours.

(6). Normal weather: 10 years color guarantee.

 

Q5: What's the payment terms?

A: Usually by T/T, 30% deposit and the balance paid before shipment.

 

Q6: What certification do you have? What's your standard?

A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.

 

Q7: What's the delivery time for samples and mass production?

A: (1). 2-3 weeks to open the new moulds and make free samples.

(2). 3-4 weeks after receipt of deposit and confirmation of the order.

 

Q8: What's the packing way?

A: Commonly we use plastic film and kraft paper, also we can make as per customers' requirements.
 

Welcome to our booth
or 
Contact Us
 

I and H Shaped Aluminium/Aluminium Beam Profile

(1). Suitable for advertising board and so on.

(2). 20 years warranty.

(3). High corrosion resistance.

(4). 5-10 years weather resistance.

(5). Good wear resistance & anti-scratch.

(6).Size customized.

 

Our Advantages


More Products



Packing




 

Q1: What's the thickness for anodizing? Can you do 15um?

A: Our normal thickness is about 10 um. Yes, we can do 15um and above.

 

Q2: What color you can do for powder coating? The thickness for powder coat?

A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.

 

Q3: What color you can do for wood grain?

A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.

 

Q4: How's the weather resistance for wood grain finish D1010?

A: (1). Powder: Akzo Noble Interpon D1010.

(2). Wood grain film: Italian Menphis.

(3). Standard complied: American AAMA Standard.2603

(4). UV test:1000 hours.

(5). Salt spraying test:1000 hours.

(6). Normal weather: 10 years color guarantee.

 

Q5: What's the payment terms?

A: Usually by T/T, 30% deposit and the balance paid before shipment.

 

Q6: What certification do you have? What's your standard?

A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.

 

Q7: What's the delivery time for samples and mass production?

A: (1). 2-3 weeks to open the new moulds and make free samples.

(2). 3-4 weeks after receipt of deposit and confirmation of the order.

 

Q8: What's the packing way?

A: Commonly we use plastic film and kraft paper, also we can make as per customers' requirements.
 

Welcome to our booth
or 
Contact Us
 

Dual Color Controller

Dual Color Controller are generally designed voltage 12V-36V, the number of each circuit LED 3-6 in series, current limiting resistor buck, each loop current of 20mA or less. A product of a plurality of LED circuit LED, the advantage of low pressure, simple structure, easy to design;

Dual Color Controller Drawback is: when the current large scale product, you need to configure the low-voltage switching power supply. Due to the limited shortcomings of products, low-voltage long-distance transmission is not possible, all led light bar controller [1] is limited to the small size of the product, such as text signs, small patterns and so on. According to this feature.

The controller design specifications of Dual Color Controller : 12V selection of 75A / 30V MOS power of control, the output current 8A / Road; 24-36V selection 60A / 50V MOS power of control, the output current of 5A / road. Users can control large ones selected according to the above specifications of Dual Color Controller, the transitions can choose to buy NE10 NE20 series of low pressure to low pressure controller series, the gradient. Note that LED must be common anode (+) pole connection method, controller Yin (-) pole, the controller does not include low voltage power supply.

Features Dual Color Controller to control more than large ones, to control the use of the serial signal transmission purposes, the general control unit 512 need only four control connection, serial LED controller LED light sources require board register with the controller can choose models NE040S controller, the controller has reached maximum capacity 4096KBit, if the load 512 LED unit 8192 can achieve maximum picture frame.

Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, for Dual Color Controller we apply the CE, RoHS and SAA certificate for our led lighting product.

Dual Color Controller,12V Dual Color Controller,Rf Dual Color Controller,White Dual Color Controller

Shenzhen Mingxue Optoelectronics CO.,Ltd , https://www.led-lamp-china.com