Identify the quality of safety shoes

Identifying the quality of safety shoes requires looking at both the appearance and the internal indicators. Since the internal indicators often need to use detection equipment, it is more practical for a consumer to differentiate the quality of safety shoes from the appearance.

1. Uppers (Help)
The upper is one of the main components of the shoe. For smooth shoes, it depends on whether it is soft and plump. After the hand presses on the upper, whether the loose surface phenomenon occurs. A good upper should be plump and soft, feel comfortable, uniform in gloss, and free from looseness. For the uppers of suede shoes, attention should be paid to checking whether the villi are short and even, and the hue should be the same. The shoe is part of the upper. It is used to reinforce the upper, prevent the upper from deforming and improve the feel of the foot. Therefore, good shoes materials (such as real leather shoes) should have good touch, breathability and moisture absorption, and not easy to decolorize. In the sewing, there should be no wrinkles and fat edges in the shoes.
2. Insole Normal men's shoes use half-insole or heel pad. Women's shoes are covered with a full pad that covers the insole. The insole has the function of keeping the insole clean and covering the unevenness of the insole to improve the feeling of the foot. Therefore, the insole should have good suction and moisture absorption. In workmanship, the insole should be flatly adhered to the insole, and there should be no undulations.
3. Outer Bottom From the aspect of appearance, the bonding state around the outsole should be closely adhered with no gap, and the bottom surface should be flat.
4. The heel Whether it is low-heeled or high-heeled, first of all, it depends on whether the cooperation with the shoes is natural. For women's shoes above half high heels. The following two points are more important: First, the heel should be installed in the inner bottom. Before and after the swing should not be shaken; Second, the palm surface should not be less than the bottom of the heel.
5. The inner bottom On the one hand, looking at the inner bottom material, it is best to be leather. On the other hand, it is necessary to forcefully press the waistband by hand, which is equivalent to the part of the instep when the shoes are worn, and the silk is not moving well. Under the effect of this force, if the edge of the shoe is deformed, the quality of the shoe is problematic.
6. Stability Place the shoes on the flat surface and the shoes should stand still immediately. Such shoes are of good stability. This is one of the basic conditions for high-quality shoes.

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.