Model NO.: 6J11
State: soft ,hard
surface: bright
standard: GB/ASTM
sample: Free
Size: 0.01-10mm
Trademark: TANKII
Transport Package: in Roll/Coil/Spool
Specification: 0.01-10mm
Origin: Shanghai, China
HS Code: 7409400000
Model NO.: 6J11
State: soft ,hard
surface: bright
standard: GB/ASTM
sample: Free
Size: 0.01-10mm
Trademark: TANKII
Transport Package: in Roll/Coil/Spool
Specification: 0.01-10mm
Origin: Shanghai, China
HS Code: 7409400000
Manganin alloy resistance heating wire 6J11 for measuring apparatusChemical Content, %
Ni | Mn | Fe | Si | Cu | Other | RoHS Directive | |||
CD | Pb | Hg | Cr | ||||||
- | 10.5-12.5 | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 0-45ºC |
Resisivity at 20ºC | 0.49±0.03ohm mm2/m |
Density | 8.G/cm3 |
Temp Coefficient of Resistance at 20 ºC | -80~+80α×10-6/ºC |
Melting Point | 1450ºC |
Tensile Strength(Hard) | 635 MPa(min) |
Tensile Strength,N/mm2Â Â Â Annealed,Soft | 340~535 |
Elongation | 15%(min) |
EMF vs Cu, μV/ºC (0~100ºC) | 2 |
Micrographic Structure | Austenite |
Magnetic Property | Non |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |
 Manganin alloy resistance heating wire 6J11 for measuring apparatus
Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | RoHS Directive | |||
CD | Pb | Hg | Cr | ||||||
- | 10.5-12.5 | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 0-45ºC |
Resisivity at 20ºC | 0.49±0.03ohm mm2/m |
Density | 8.G/cm3 |
Temp Coefficient of Resistance at 20 ºC | -80~+80α×10-6/ºC |
Melting Point | 1450ºC |
Tensile Strength(Hard) | 635 MPa(min) |
Tensile Strength,N/mm2Â Â Â Annealed,Soft | 340~535 |
Elongation | 15%(min) |
EMF vs Cu, μV/ºC (0~100ºC) | 2 |
Micrographic Structure | Austenite |
Magnetic Property | Non |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |
Â
Solvent Based Putty,Solvent Based Glue,Solvent Based Grease,Petroleum Based Adhesives
CHANGXING GUANGDA NEW MATERIALS CO.,LTD. , https://www.gdbentonite.com