With the progress of the times, more and more fine-tuned houses are now installed. So what are the standards for the acceptance of finely-decorated houses? Only by grasping some details can we guarantee the future of home life. We can promptly identify problems and avoid problems. Therefore, the following Xiaobian introduced to everyone the fine decoration of the house acceptance criteria .
1. Look at the "records" and the "two books." Before the arrival of a new home, the owner should see a copy of the project's relevant filing documents in order to confirm that the project is a legal construction; at the same time, the “house quality warranty book†and “house use manual†provided by the developer should be obtained.
2. Check whether the floor of the bathroom is leaking. This test is best performed at the same time as the upper occupants. There should be no stagnant water on the qualified ground, because the floor drain is the lowest point of the toilet. However, except for the rough house, there is a certain height of the post-drainage ground around the floor drain.
3. Check whether there are cracks in the plastering of the wall surface, the floor decoration surface layer and other decorative surface layers. Use a small hammer to gently tap, if you hear the "empty" sound, there is a gap between the surface and wall (ground) surface; if you hear the dull knock sound, then it shows that they contact well.
4. In the top floor rooms, you must check whether there is any trace of rainwater leakage on the top surface of each house. Because according to the building construction requirements, the houses handed over by the construction unit were either “tested†by two heavy rains, or the construction party conducted rain tests under the supervision of the supervision unit.
5. In general, the cracks on the wall are mostly not structural cracks, and they are not dangerous. Problems with the structure of the house often occur on the balcony. If there is a crack in the connection between the room and the balcony, it is likely to be a sign of the break in the balcony.
6. Check whether there is any seepage, leakage or blockage in the upper and lower water pipelines. Turn on the faucet and try to make the water flow bigger and anxious. Let's take a look at the water pressure and try the drainage speed.
7. When gates and meters are outdoors, they should be checked whether they can control indoor lamps and indoor outlets. The method is whether or not the indoor power supply is completely turned off after the gate is turned on. If there are gates in the gate, separate gates should be checked separately. Completely control each branch line.
8. To protect the safety of young children, safety sockets must be provided on sockets 30 cm above the ground.
9, the power outlet in the bathroom should be a moisture-proof socket and splash-proof measures. The lighting lamp holder of the bathroom must be a safe lamp holder for the magnetic port. There should be no socket above the wash basin.
10. The kitchen and toilet should be arranged near the ventilating passages, which will facilitate the rapid discharge of odors, exhaust gases, etc., and keep the indoor air clean.
11. Check the firmness of switches and sockets. Don't forget to open the line interface of the phone and TV. Pull it a little harder to see if it is a virtual one.
Editor's summary: What are the standards for the acceptance of finely-decorated houses? I would like to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Fine decoration budget waterproof acceptance Japanese style decoration design three-room wall acceptance window acceptance
Aluminium Framed Doors,Compact Laminate,Partitioning Systems Laminate,Commercial Partitioning Systems Laminate
PRO CABINET SOLUTION PTY LTD , https://www.pcscabinet.com.au