Petroleum Asphalt Four Component Tester

Petroleum Asphalt Four Component Tester
Summary:
    This instrument is based on the industry standard of the people's Republic of China 0509-2010 JTG "petroleum asphalt four-component determination method" and JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering in T 0618-1993 "Asphalt chemical composition test (four-component method)" provides the design and manufacture of it. It is the ideal instrument for measuring petroleum asphalt saturate, aromatic, resin and asphaltene four components.
    The instrument can also refer to People's Republic of China industry standards SH / T 0266-1992 (1998) " Petroleum asphaltene content determination method" to measure diesel, fuel oil, lubricating oil, asphalt and remove low boiling point fractions of crude oil asphaltene before 260 ºC.
 
Main technical specifications and parameters:
(I) Heating furnace
1. Electric heater power range: 100W ~ 1000W, stepless adjustable;
2. Dimension: 270mm × 160mm × 115mm (length × width × height);
3. Total power consumption: less than 1200W.
(II) Circulating water bath --HWY-10 multifunction circulation water bath
1. Bath volume: 10L;
2. Temperature range: -10 ºC ~ 95 ºC;
3. Constant temperature accuracy: ± 0.2 ºC;
4. The cycle of water: ≥4L / min;
5. Dimensions: 530 mm × 400 mm × 430 mm (length × width × height);
6. Total power consumption: less than 1100W.
(III) Base and column
1. Base size: 345mm × 210 mm;
2. Column total height: 1120 mm.
 
Optional accessories:
1. Vacuum drying oven: a vacuum of 267Pa (2 mm Hg);
2. High temperature furnace: 0 ºC ~ 1000 ºC, there is an automatic temperature controller;
3. Balance: Weighing 120g, the sense of the amount of 0.1mg.

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

Petroleum Asphalt Four Component Tester
Summary:
    This instrument is based on the industry standard of the people's Republic of China 0509-2010 JTG "petroleum asphalt four-component determination method" and JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering in T 0618-1993 "Asphalt chemical composition test (four-component method)" provides the design and manufacture of it. It is the ideal instrument for measuring petroleum asphalt saturate, aromatic, resin and asphaltene four components.
    The instrument can also refer to People's Republic of China industry standards SH / T 0266-1992 (1998) " Petroleum asphaltene content determination method" to measure diesel, fuel oil, lubricating oil, asphalt and remove low boiling point fractions of crude oil asphaltene before 260 ºC.
 
Main technical specifications and parameters:
(I) Heating furnace
1. Electric heater power range: 100W ~ 1000W, stepless adjustable;
2. Dimension: 270mm × 160mm × 115mm (length × width × height);
3. Total power consumption: less than 1200W.
(II) Circulating water bath --HWY-10 multifunction circulation water bath
1. Bath volume: 10L;
2. Temperature range: -10 ºC ~ 95 ºC;
3. Constant temperature accuracy: ± 0.2 ºC;
4. The cycle of water: ≥4L / min;
5. Dimensions: 530 mm × 400 mm × 430 mm (length × width × height);
6. Total power consumption: less than 1100W.
(III) Base and column
1. Base size: 345mm × 210 mm;
2. Column total height: 1120 mm.
 
Optional accessories:
1. Vacuum drying oven: a vacuum of 267Pa (2 mm Hg);
2. High temperature furnace: 0 ºC ~ 1000 ºC, there is an automatic temperature controller;
3. Balance: Weighing 120g, the sense of the amount of 0.1mg.

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

Surface Mounted Downlight

The dimming version is dimmable LED. The principle of dimmable driver is triac dimming.The 10% to 100% dimming range will satisfy your different lighting needs. All aluminum material, sturdy lamp body and excellent heat dissipation. Customized flicker-free driver, protect your eyesight, 50,000 hours of service life, three-year warranty. Jiangmen Synno Co., Ltd is a high and new-tech enterprise. Our company specialized in LED green light source. And we are engaged in medium and high-end LED decorative lighting with a whole set of design and manufacture of lamps and lanterns, development of control system and engineering supporting service. Our company is devoted to provide customers with LED application products. Synno has got through ISO9001 quality system certification of SGS of Switzerland, CE certification of European Union, GS certification, ROHS certification and relevant domestic LED lamps and lanterns certification.

Surface Mounted LED Downlight, Surface Mounted Cob Downlight, LED Surface Mounted Downlight,Surface Mounted Ceiling Downlight, Downlight Surface Mounted

Jiangmen Synno Lighting Co., Ltd. , https://www.synnoled.com