Pot hand hoist tips:
The size of the flower pot should be moderate. Before the potted plant, the loam should be selected, and the loose soil should be used, mixed with soil and fertilizer, alkaline soil and plate soil are not available. The soil should be ventilated and have good drainage performance. It is recommended that the soil be mixed with the nursery soil and mixed in a ratio of 1:5 or 2:5. Or use peat soil directly, the effect is better.
If the culture soil does not contain fertilizer, a pot of 50 grams of water soluble fertilizer or 100 grams of organic fertilizer as a base fertilizer. The potted gourd is very easy to dry, and it is poured back one day when the vines begin to spread. In the hot summer season, water is poured twice a day. Four pillars were placed on the flowerpot to fix it, 50 cm above the surface of the flowerpot, and made into a 90-degree grid-like scaffolding.
When the female vine grows to 4-5 leaves, the vines leave 2 vines to spread upward. When the vine climbs the top of the shed, it is necessary to smash the vines and extend the two sun vines upwards. When Sun Man grows to 5 branches and leaves, he begins to bend the tip, so that the fruit grows out from the grandson of Sun. Let the vine grow freely, and when it grows out of the shed, it will fall off. It is important to topten the fruit when it wins 5-6.
It is the key to cultivate strong seedlings before the results. First, it is necessary to topdress in time. The growth period is preferably fermented sesame sauce and bean cake, which can be diluted and watered simultaneously. Phosphorus and potassium fertilizer should be added during the bud period to increase the fruit setting rate and fruit quality. The second is to shoot the seedlings. The optimum temperature for the growth of the gourd is about 30 °C. I like to have more sunshine, so I should sun as much as possible. At noon in the summer, it is better to use leaf stalks instead of coke, so that you can cultivate strong seedlings and control madness.
When the vine grows to a height of about 1 meter, the top 3 to 4 leaves are topped from the root. Because the hand scorpion small gourd has the side branch habits, this can make the early branch of the bottom early results, and reduce the height of the stent for easy viewing. After the lateral buds grow, there are usually 3 to 4 leaves that can be budded, and the female buds are like two raised balls. If there is no bud, it is a slider. The slider grows strong, and if it does not fall off in time, it will take away the nutrients of the whole plant, causing other fruit branches to shrink and become dead buds. It is also possible to top again at the 3 to 4 leaves of the slider to make the slider become the result branch.
Hand-small squash is a cross-pollinated plant, and pollination during flowering is the key to fruit setting. Due to the small number of potted gourds, there are few bee sources, and it is difficult to meet the flowering period. It is necessary to artificially pollinate. The gourd blooms every evening and the best pollination period is before 10 am the next day. When pollinating, use a dry towel and a small cotton ball to take pollen from the male flower, and immediately receive the female flower, and do not delay. In case of rain, put the male and female flowers in plastic bags in advance, and do not get rain.
Especially after the medium-sized scoop is first 1-2 fruits, it will not be the result. Therefore, the earliest female flowers are removed. When making fruit, put 5-6 solid fertilizers into the pots, and then use the liquid fertilizer to add 200 times of water to water after the fertility disappears.
The main pest of the gourd is the aphid, and the control method is the same as that of the field crop. Lao Zhang prefers to use the activin. Oh, a small bag of 30 pounds of water is enough. It is harmless to humans and animals.
Sunplus Ceramic Film abrasives are made with Film and CERAMIC aluminum oxide. The film backing provides greater tear resistance, and the ceramic grains offer faster cutting results and high removal rates & increased performance.
Sunplus Abrasives Co.,Ltd is a leading company in the field of researching and manufacturing premium quality coated abrasives for a wide range of applications.
Founded in 2004, Sunplus has developed into an enterprise with the leading fully - automated Germany system production line and technology to make high and stable quality sandpaper. All our materials are imported from Europe, Japan and Korea, which assures high quality products from the source.
We constantly invest in research and development so as to ensure that our products will always be a step ahead of competition.
Ceramic Film,Sanding Film,Ceramic Film Sandpaper,Ceramic Round Disc
GUANGZHOU SUNPLUS TECHNOLOGY CO.,LTD , https://www.sunplussandpaper.com