Compared with new real estate, the price of second-hand housing is not low, but there are still many people who are willing to choose second-hand housing. Accompanying many friends who have bought second-hand houses, there are still many problems involved in the decoration. Here I step on the decoration of the house by the front decoration, decoration, decoration after three stages to talk about second-hand housing renovation.
Buying a second-hand house will probably go through a psychological process, that is, the original appearance of the old house that has been ravaged by life will take a picture of one's pride and pride. My transformation of this old house has the kind of low eyebrows and melodious welcome in the crush, I thoroughly accept all his qualities, and then willingly walked into his world.
speak English! How did the previous owner install the house so low, I want to make it taller!
Before renovation, these steps are essential before construction!
disinfection
Except for the unused second-hand rough houses, most of the second-hand houses have been lived for a long time. The interior decoration will have a lot of cleaning dead corners, which cannot be cleaned at all. If you do n’t want to remove all the reinstallation, it is best to spray in these places. Once again, of course, the disinfectant must not be of the 84 type. You need to use AQ from Hong Kong.
Concealed engineering inspection
"Concealed works" inspection, the so-called hidden works are the lines and pipes in the house.
Here I would like to remind everyone that we must ask a professional hydroelectrician to come to the house for inspection and repair. This is a major event and cannot be ignored! The main inspections are drainage pipelines, strong and weak electric lines, circuit distribution, etc. If there are problems with the inspection, replace them directly and re-route the cables.
Wall structure inspection
The best way to check the wall surface is to check it on rainy days. In rainy days, you can observe the wall surface in all directions, mainly to check whether the surface of the wall is damp. If this happens, the internal wall is likely to have cracks. There are also hidden safety hazards on the line.
Door and window inspection
The first is to check whether the material of the doors and windows is aging, and the second is to check whether there are cracks around the doors and windows and the joints of the walls. If there is a problem, directly remove it and do it again, do not hesitate.
It should also be reminded that many second-hand houses will be equipped with stainless steel hangers and even stainless steel flower racks on the balcony. This must be carefully checked whether the fixation is firm and whether there is aging, because this involves the safety of other people ’s lives. It doesn't feel firm, it's aging, I'd rather remove it.
Floor inspection
The life of the wooden floor will not be too short. If the former owner is not too frustrated, there will generally be no problems, and the old wood board is also more environmentally friendly, so you do n’t need to change it. Even if there are individual floor damages, it is only necessary to renovate a few pieces in contrast to the color difference, and there is no need to replace all of them. This not only saves the amount of engineering, but more importantly saves a lot of decoration costs!
When renovating, these places must be more troublesome!
budget
Although it is a second-hand house, the decoration budget must be well designed. Every part of the water, electricity, electrical appliances, materials, and labor costs should be planned, and everything should not be determined temporarily. In that case, it is not easy to decorate.
Structural design
In addition to the design style of the foundation of the old house, you can also adjust the style according to your preference. This type of transformation often involves the demolition of the house structure. Before that, it is recommended that you ask the property about the relevant wall structure, distinguish where the load-bearing wall is, and know which walls cannot be dismantled.
Pipeline renovation
Generally, the second-hand houses have a long service life, and most of the pipes have certain corrosion and aging. If it is found that the old galvanized pipes are used in the inspection, I suggest to replace them with copper pipes, aluminum-plastic composite pipes or PP if possible. -R tube, because the corrosion resistance of such products is much better than galvanized materials, here uncle recommends PP-R tube, the price is cheap, the durability is much higher than the former.
Circuit modification
There is a common problem in second-hand house circuits: simple circuit wiring, aging wires, and poor wire materials. These traditional lines can no longer meet the needs of modern families, so they must be completely renovated during the decoration. I have also introduced how to lay out the cables and how to distribute the sockets. You can see my previous sharing.
Wall, ceiling
Walls and ceilings are also a big problem, especially the ceiling is easily overlooked by everyone. Before inspection, if the wall is inspected for obvious wrinkles, incompleteness, or yarn surface, the wall must be renovated. The main process of refurbishment is relatively simple: the first step is to remove the dirt surface of the bottom layer, then repair it with cement slurry, and finally reinforce it with a layer of primer, which is not only beautiful but also moisture resistant.
Door lock
The door locks left after the disposal of the second-hand house must not be left. The first is to prevent the original house from preserving the key. Secondly, the internal structure of the old lock is simple and the security is not high. The uncle suggested that at least all the main door locks should be replaced.
Furniture
The original homeowner will leave some furniture more or less, and some furniture that can be used can be used up. For example, traditional shelves can be repainted as storage shelves, and books and interior decorations are a good choice.
After the decoration, you should pay attention to it!
The main problem after the decoration is the acceptance. Of course, there are some small details. Let's take a look at the matters needing attention together:
Waterproofing
Waterproof acceptance can be done in the traditional way—water injection experiment:
The first step is to determine which areas are waterproof;
The second step is to inject water in the area where the water is made. Generally, the water injection is normally about 12 cm, and make a mark;
The third step is to check and accept 24 hours after water injection to check whether there is water leakage.
If the difference between the inspection result and the mark is not large, the waterproofing project is qualified.
Line engineering
The inspection of the line is mainly to check whether the line is smooth, and the indoor lighting test can be turned on at the same time;
Secondly, pay attention to the following items:
Whether the line connection is firm;
Whether there is a connector on the TV cable, if any, the connector must be replaced, or use a splitter at the connector;
Whether the position of the switch box is reasonable;
Whether the material of the line pipe is the same as the material you choose.
Wall, ceiling
· Walls and ceilings are nothing more than the acceptance of the work results of the decoration master; the main inspections are as follows:
· See if the putty on the surface is dry, if there is no dryness, there may be cracks;
· Check whether there are small cracks on the surface of the wall, if necessary, repair it in time, otherwise the wall will be easily damp;
· Check whether the wall is smooth or wrinkled.
Other details
In addition to the large aspects of water, electricity and pipelines, some small details are also important:
· Whether the gap between the tiles or the floor is uniform, and whether there is any obvious deviation;
· Whether the socket box is installed properly;
· Check whether the joint between the door and the door frame is closed;
· Check whether the material of the window is consistent with your own purchase. Second, check whether the window is installed tightly. The simple method is to pour a glass of water on the end of the window to see if the leakage is even.
There are still some differences between the steps of renovating a second-hand house and the steps of a rough house. In the law of decoration, application is more important than everything. You don't have to bind yourself to a boring decoration list. The general steps follow this way, the basic problem is not big.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Our Oil Seals is good in quality and competitive in price. We are manufacturer and supplier of Oil Seals following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Oil Seals with good services for you!
Oil Seals, Cr Oil Seal, Tc Oil Seal, Tb Oil Seal
NINGBO BORINE MACHINERY CO.,LTD , https://www.borine-agroparts.com