Solid wood doors are favored by consumers because of their many advantages such as clear grain texture, non-deformation, corrosion resistance, door thickness, weight and effective sound insulation. The beautiful texture of the solid wood door itself gives it a natural, long-lasting magic of humanity and art, and also embodies the noble, luxurious, classic artistic value. However, even if the solid wood door is not properly installed, it will cause poor switching and damage to the wooden door. Therefore, the installation of the solid wood door is very important. Today's talk about the key points of the installation of solid wood doors, and people often mentioned the "easy cracking of solid wood door" reasons.
Solid wood door installation standard
1, door cover installation standard
The assembly of door pockets should be tight, smooth, and free from black seams. Attention should be paid to the alignment when installing the diagonals of the door pockets. The error range should be within 1 mm (within 2 meters) and within 1.5 mm (2 meters or more). The installed door covers should be horizontal and vertical, allowing a large 2mm in verticality, and 1mm in horizontal flatness.
2, set line installation standards
The sleeve thread should be fixed with the door sleeve and the wall body with glue. The interface should be flat and tight. After the installation is completed, it can be seen whether the side sleeve is in a plane or not. The line of curvature can only allow 1mm error.
3, door leaf installation standard
Doors should be flat and vertical. In addition, the door leaf and the door cover should be exposed, the lower gap between the door cover and the door leaf should be 6 to 7 mm, and the door leaf should be tightly integrated with the sealing strip, so that no oscillation phenomenon can occur.
4, hardware accessories installation standards
For the installation of solid wood door hardware fittings, the hinge should be vertical and flat, the size of the notch should be the same as the hinge; the slotting of the door lock should be accurate and standard; the connecting piece and the lock light should be flexible and smooth, and the surface should be smooth and smooth.
Reasons for cracking of solid wood doors
1, solid wood moisture content problem
The moisture content of the solid wood door is not controlled well, and there will be cracking, deformation and other quality problems. Therefore, it is very important to control the moisture content of the solid wood door. The water content after the balance will not be cracked and deformed due to environmental factors such as sunlight, overcooling, and overheating.
2, caused by the weather
The weather in each area will be different, so the moisture content requirements for solid wood doors are also different. The average moisture content in the southern air is 14%, and the average air content in the northern air is 12% to 13%. Therefore, after the solid wood door in the south is transported to the north, there will be cracking.
3, improper use
The solid wood door is not well maintained, exposed to the sun or wiped with a damp towel. This will affect the durability of solid wood doors.
Editor's summary: The reasons for the installation standards of solid wood doors and the cracking of solid wood doors are introduced here. I hope to help everyone. Want to learn more related knowledge can focus on this site information.
Solid wood door interior solid wood door
Collapsible Bow Saw,Folding Bush Saw,Foldable Bow Saw,Professional Bow Saw
ZHOUSHAN CHUNLEI HACKSAW CO.,LTD , https://www.bailei.com