The material used for refractory mortar should be considered in line with the material of the refractory product of the masonry. In addition to jointing materials, fire-resistant mud can also be used as a protective coating for the lining body by means of a smearing method or a spraying method. The following is a brief introduction of knowledge about refractory clay brought by Xiao Bian. Let's take a look.
Refractory mud characteristics and applications
1, good plasticity, easy construction;
2, high bond strength, strong resistance to corrosion;
3, high refractoriness, up to 1650 °C ± 50 °C;
4, good slag resistance;
5, hot spalling is good. Refractory mud is mainly used in coke ovens, glass kiln furnaces, blast furnace hot blast furnaces, and other industrial furnaces. Applied industries are: metallurgy, building materials, machinery, petrochemicals, glass, boilers, electricity, steel, cement, etc.
Type of fire-resistant mud
Depending on the composition of the material, the fire-resistant mud can be divided into: dry earth refractory mud, high-alumina fire-retardant mud, silica refractory mud, and magnesia refractory mud. Refractory mud can be divided into the following three categories according to the different binders:
(1) Ceramic bonded refractory mud It is a mixture of refractory fine aggregate and ceramic binder (plastic clay). Delivery status is dry, it needs to be used after adding water, and it is hardened by ceramic bonding at high temperature.
(2) Hydraulically bonded fire-resistant mud It is a mixture of fire-resistant fine aggregate and a hydraulic binder (cement) that mainly functions as a cement. The delivery state is only dry and is used after adding water. No heating is required when hardening.
(3) Chemically bonded refractory mud consists of a combination of refractory fine aggregate and chemical binder (inorganic, organic-inorganic, organic). Delivery can be either slurry or dry and hardened below the ceramic bonding temperature. According to the hardening temperature, this fire-resistant mud can be divided into two kinds of gas hard and hot hard. The gas-hard refractory mud is usually formulated with gas hard binder such as water glass. Hot-hard refractory mud is usually formulated with a thermosetting binder such as phosphate or phosphate. After the hardening of the thermosetting refractory mud, in addition to having high strength at various temperatures, it also has the characteristics of small shrinkage, tight joints, and strong corrosion resistance.
Refractory mud two kinds of finished products and semi-finished products. The so-called finished refractory mud is that the manufacturer has already prepared the raw material and clinker according to the proportion. When using on the spot, it only needs to stir the water according to the standard; the semi-finished or non-finished refractory clay is not blended with the raw material and the clinker. When used on site, mix thoroughly according to the composition of different muds, and add water and stir evenly as required.
Refractory mud temperature standard
1, according to the level of refractoriness
Ordinary refractory mud, its temperature standard is at 1580-1770 degrees Celsius
High temperature refractory mud, its temperature standard is at 1770-2000 degrees Celsius
The special grade refractory clay has a temperature standard above 2000 degrees Celsius.
The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.
Ceramic Bathroom Cabinets Europe and the United States Ceramic Ceramics Electric Cooker Ceramic Variety Ceramic Mop Pool
NCB high viscosity liquid Internal gear pump
Ncb High Viscosity Liquid Internal Gear Pump,Liquid Gear Pump,Internal Gear Pumps,Liquid Internal Gear Pump Bucher
Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com