The welded assembly shown in Figure 1 is welded from three parts. After the parts 2 and 3 are welded to the part 1, the end face P must be added, and the size of 116_(-0.2)~0 mm is ensured, and then the M4 screw hole is machined. Part 1 is stamped from a 2mm thick steel plate. Because it is batch production, a fixture is needed to hold the workpiece. The profiled surface in the fixture is designed according to the inner profile of the part 1, as shown in Figure 2.
Pet Transfer Laser Film,Hologram Transfer Film,3d Sublimation Transfer Film
Hongkong NanJie Resources Co.,Ltd , http://www.aluminium-nanjie.com