The four major details of the ground acceptance must remember!

If you think that the acceptance of the ground is to look at the surface, then you are wrong, the floor decoration has gone a lot, acceptance is also the door of the university, in addition to the effect of pavement, some construction details determine our future If home life is perfect, if you don't care about these small details, then your home improvement is a failure.

First, the floor can have color but it can't be too serious

The demanding uniformity of the natural color difference of solid wood flooring is unrealistic. The solid wood floor must have a color difference, and the color difference is naturally present. Inevitably, this is determined by the nature of the property, so it is normal to say that there is a slight color difference at the time of installation. In order to avoid the chromatic aberration of the wooden floor, affecting the overall appearance of the living room, we will test the pavement during paving, and gradually transition during the paving process to pave the color close to the floor, and the rest can be paved. Under the bed, wardrobe and sofa can reduce the visual difference.

Second, no treatment on the stairs will affect the appearance

For the problem of stairs, be sure to do a good job in the design and budget before the renovation, because the decoration of the stairs has a great impact on daily life, for the side of the stair handrail, you can choose to tile it so that it can prevent moisture and moisture. However, if the stairs are paved wooden ladders, the same wooden material can be used on the side of the handrails, so that the appearance is uniform.

Third, how to avoid empty drum floor tiles

Please pay attention to the following matters when constructing such problems. Base surface treatment to remove oil, dust and loose material from the work surface, clean the gaps in the tiles, and ensure that there is no debris or water. Stir and pour the dry powder into a container containing 27%-29% water, stir it at a low speed with an electric stirrer, and pour the flour to a uniform, thick, thick slurry with no precipitate (paste-like). Allow to stand for 3-5 minutes and stir for 1-2 minutes before use.

Fourth, pay attention to caulking!

The caulking tool presses the caulking material completely into the gap in the diagonal direction. Care must be taken not to leave it empty. After 10 minutes wipe the caulk on the tile surface with a damp sponge or damp cloth. Clean, after the joints are dry, use a wrung wet sponge to clean the tile surface. Within 3 days after the construction, as far as possible, avoid direct sunlight, and it is recommended to sprinkle and repair the construction joint filling material every day for one week.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Spring decoration knowledge

Shower Faucet

Shower Faucet,Shower Valve,In-Wall Shower Faucet,Concealed Shower

Zhejiang minmetals huitong import and export Co., Ltd , https://www.zjminmetals.com