Main structure of SCD clinker trough conveyor
The SCD conveyors mainly include: 1, transmission device 2, head device 3, tail device 4, operating portion 5, refueling device 6, bracket, track and guard device 7, safety protection device and the like.
Trough conveyor before driving inspection content:
Pre-operation inspection
a) Check whether the amount of lubricating oil in the chain and sprocket drops is sufficient and the dripping point is correct;
b) Check if there is any loosening or falling off of the pin;
c) Inspect the sundries for debris;
d) Check the tension of the tensioner is appropriate;
e) Check the gearbox lubricant oil quantity and oil quality;
f) Check whether the bolts and fixing bolts are loose or fall off at each place;
g) Check the head and tail wheel wear and bolts are loose, fall off;
h) Check if the skirt trigger opening is clear.
2, in-service inspection
a) Check the motor, reducer for noise, vibration, temperature, and odor;
b) check the chain and gear meshing conditions, the chain lubrication condition is good;
c) Check whether the skirt runs smoothly and whether the T-pin of the supporting wheel falls off;
d) Check whether each roller is in good contact with the track;
e) Check whether the hydraulic connecting shaft transmission condition is good;
f) When the hammer breaks and the grate cooler conveyor system returns after a trip, pay attention to the amount of material on the conveyor;
g) Check whether each feeding port is open and whether it is ground;
h) Check if the bolts and connecting bolts are loose or fall off;
i) Check if the idler's speed limit is out of control.
3, routine maintenance
a) Check the condition of the skirts;
b) Check the roller, track wear and whether the roller T-pin is off;
c) Check the hydraulic coupling, reducer oil quality, and oil quantity, and add and replace them in time;
d) Check tension spring condition
e) Check the wear of the chain and sprocket; whether the chain is bent or not, and whether the skirt is deformed;
f) Check if the bolts are loose or fall off and tighten and replace in time.
phone
The SCD conveyors mainly include: 1, transmission device 2, head device 3, tail device 4, operating portion 5, refueling device 6, bracket, track and guard device 7, safety protection device and the like.
Trough conveyor before driving inspection content:
Pre-operation inspection
a) Check whether the amount of lubricating oil in the chain and sprocket drops is sufficient and the dripping point is correct;
b) Check if there is any loosening or falling off of the pin;
c) Inspect the sundries for debris;
d) Check the tension of the tensioner is appropriate;
e) Check the gearbox lubricant oil quantity and oil quality;
f) Check whether the bolts and fixing bolts are loose or fall off at each place;
g) Check the head and tail wheel wear and bolts are loose, fall off;
h) Check if the skirt trigger opening is clear.
2, in-service inspection
a) Check the motor, reducer for noise, vibration, temperature, and odor;
b) check the chain and gear meshing conditions, the chain lubrication condition is good;
c) Check whether the skirt runs smoothly and whether the T-pin of the supporting wheel falls off;
d) Check whether each roller is in good contact with the track;
e) Check whether the hydraulic connecting shaft transmission condition is good;
f) When the hammer breaks and the grate cooler conveyor system returns after a trip, pay attention to the amount of material on the conveyor;
g) Check whether each feeding port is open and whether it is ground;
h) Check if the bolts and connecting bolts are loose or fall off;
i) Check if the idler's speed limit is out of control.
3, routine maintenance
a) Check the condition of the skirts;
b) Check the roller, track wear and whether the roller T-pin is off;
c) Check the hydraulic coupling, reducer oil quality, and oil quantity, and add and replace them in time;
d) Check tension spring condition
e) Check the wear of the chain and sprocket; whether the chain is bent or not, and whether the skirt is deformed;
f) Check if the bolts are loose or fall off and tighten and replace in time.
phone
SHENZHEN YGHQ Optoelectronics Co.,ltd. , https://www.leds-smd.com