How is the ultra-fine talcum powder so "high on the" produced by the process? Let’s take a look!
Dressing
Talc beneficiation can be divided into flotation, hand selection, magnetic separation, and photoelectric selection . At present, there are still some defects in the flotation technology, so the whole industry basically does not use flotation beneficiation; the hand selection is based on the different grindiness of talc and gangue minerals, and the experience of workers' selection and accumulation is manually selected. method. The method of sorting using the different optical properties of talc and impurity mineral surface is called photoelectric detection, and this method is now more and more valued and used by enterprises.
2. Crushing and coarse powder processing
After the ore is sorted into the warehouse, it enters the workshop in batches for crushing and coarse grinding before ultra-fine grinding: firstly, hammer crushing, then vertical grinding, iron removal, and sub-packing, as follows schematic diagram:
3. Ultra-fine grinding
With the advancement of technology and the increasing demand for market applications, fine grinding and ultra-fine grinding talc have become a benchmark for measuring the quality of talc products. Talc has a Mohs hardness of 1, which is naturally breakable and grindable. Ultra-fine grinding of talc, currently the domestic and international markets basically adopt two ways: one is airflow crushing and grinding, but vertical grinding and grading screening grinding; of course, there are other processing methods such as water mill, ring barrel grinding, etc., but It is not the mainstream way.
Firstly, the airflow grinding process is introduced: coarse powder-airflow crushing-iron removal-finished powder. The fineness of the fine powder of this method can reach 1250-5000 mesh (D97=30-5um).
Followed by the vertical grinding and grading production process: vertical grinding fine powder - grading device screening - 1 to 2 screening - iron removal - finished powder, the fine product of this method of grinding fine powder can reach 1250-2500 mesh (D97=30-8um).
PVC High Speed Door are designed for indoor use and ensure rapid handling operations between different areas that should remain separated. These safe and efficient industrial doors are made of a shaped steel frame and covered with PVC. These high speed doors are safe and efficient and consist of a shaped steel frame covered with PVC. Safety is ensured by their photocells and barriers.
High speed doors protect us from harm, save energy and help us to separate processes for optimal productivity. A high speed door's most important job is to simply open and close quickly and safely every time you need it.
The high speed pvc roll shutter door require high strains, caused by the high operating speed and the frequency of openings, have to be taken into account during construction. In the same way, basic conditions like size and installation location add up to considerable requirements regarding safety and control technique.
PVC High Speed Door,Large PVC High Speed Door,Transparent High Speed Door,Great Performance High Speed Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com