The appearance of scrubbers / cars has replaced traditional cleaning tools and appeared in our daily life. Its appearance has brought great convenience to our lives and production, and made our surrounding environment more tidy. And clean. Automatic scrubbers have high cleaning efficiency, wide range of uses, and convenient operation. They are often necessary multifunctional scrubber products for some large and medium-sized enterprises or public places. This provides beneficial protection for the company's staffing, daily expenses, and improvement of corporate image. How to extend the service life of the scrubber and reduce costs, then the editor will explain to you based on years of experience:
The excellent performance of a scrubber is inseparable from the maintenance work of the scrubber. Proper maintenance can extend the service life of the scrubber. In fact, it is the same reason that we do maintenance for cars. Unscheduled maintenance, such as damage to parts due to aging or wear of mechanical parts, loss of working ability, etc. Through correct installation, use and maintenance of the washing machine, such failures can be completely avoided.
1. Maintenance and replacement of scrubber accessories:
1. Empty and clean the scrubber sewage tank. In the process of operation, the scrubber sucks the water mixture containing sludge, which is easy to accumulate in the water tank and emit an unpleasant smell. Therefore, it is necessary to clean the water tank with flowing water.
2. Empty the clean water tank, especially not during the daily cleaning operation, otherwise the non-flowing water will become a source of bacteria and so on. Cleaning the water absorption filter sometimes produces some sediments and weakens the absorption effect. Please wash with running water.
3. Check whether the squeegee is clean; if necessary, clean the rubber strip and the suction port with flowing water.
4. Check the scrubber scrubber and squeegee for wear once a week. If the ground is extremely abrasive, strong pressure on the ground will damage these accessories or accelerate their wear. Under normal circumstances, the brush plate can be replaced after 50 hours of use. On the contrary, after 30 hours of use, the absorbent strip should be replaced or turned upside down (when the four sides of the strip are still available).
5. Regularly check the water absorption filter. Sometimes, the filter will be blocked due to small water impurities, which will affect the outflow of water during the process of cleaning the ground.
6. Clean the suction tube connected to the squeegee; even local obstructions will weaken the water absorption effect of the scrubber.
7. Check whether to use floor foam cleaner. If necessary, add defoamer to the recovery tank. Remember: If there is a lot of dirt on the ground, it will produce a lot of foam, then the cleaning solution should be diluted.
Second, battery maintenance
1. As long as the battery is used normally, there is no need to add water (if it is a maintenance-free battery, it is not necessary).
2. Before using for the first time, it must be fully charged for more than 12 hours. Normally, when the power is sufficient, it can be charged for 2-3 hours. If the power is less, it will be 6-7 hours.
3. If you are not going to use it for a long time, you should store the battery fully and recharge it regularly (1 month).
4. The battery shows that the battery is dead. After a while, it is found that the battery has a small amount of voltage, called "recovery voltage". Do not use this "recovery voltage" to drive.
5. The battery should not be close to high temperature heat sources. In high temperature season, direct sunlight is strictly prohibited (especially pay attention when storing the car in summer), and pay attention to good ventilation when charging.
6. Frequently charge, so that the battery is always in a full state. If necessary, charge the battery whenever you want, but you must grasp the total amount of charging time.
7. Under normal circumstances, the battery has no problem for about 2 years. On the contrary, the service life is greatly shortened, and the new battery has to be replaced after six months of use.
3. Machine storage
(1) Store indoors and store in a dry place.
(2) Store upright.
(3) Lift the brush plate off the ground.
(4) Lift the wiper assembly off the ground.
(5) If the storage place is extremely cold, it is necessary to keep the machine completely dry before storing the machine to avoid damage caused by low temperature.
(6) Drain the sewage tank and clean water tank.
The above are some common daily methods on how to extend the service life of the scrubber. It is for reference only. I hope it can help the majority of users and save some money for more work.
================================================== ================================================== ======
Contact details of UNIS scrubber sweeper manufacturer: Miss Han 19952212010 Website: http: //
Wishing to build a unique furniture or enhance your current furniture? Take a look at our multiple finish options and at our large selection of styles to fulfill your needs.
The modern style of furniture legs are a great way to raise your dresser, sofa,dining tables, office desks, chests of drawers, cabinets,seating and side table. These furniture legs are made of super strong, brushed, powder-coated steel tube and each leg can support up to 110 lbs.
Modern surface finishes as well as a variety of shapes and lengths provide a wealth of design options,height adjustable table legs give you individually tailored solutions and desk or table heights to meet any requirement.
Furniture Leg,Metal Furniture Legs,Replacement Furniture Legs,Chrome Furniture Legs,Furniture Table Legs
Foshan Nanhai Xin Jianwei Hardware Co., Ltd , https://www.aaghardware.com