1, the pump assembly DG pump assembly quality directly affects the quality of the pump can be normal operation, and affect the pump life and performance parameters; affect the unit vibration and noise, the assembly should pay attention to the following points: a, fixed Part of the combination of parts after the concentricity of parts manufacturing accuracy and assembly quality to ensure that the parts should be processed to ensure accuracy and surface roughness, not allowed to touch, scratch. Molybdenum disulfide used as a sealant should be clean. Tightening screws, bolts should be force evenly. b, impeller outlet flow path and guide vane inlet flow channel is dependent on the axial size of the parts to ensure that. The quality of the flow channel has a direct impact on the performance of the pump, so the size of the pump can not be adjusted. c, After the pump is assembled, before turning on the filler, turn the pump rotor by hand to check whether the pump rotor rotates freely in the housing and whether the axial movement meets the specified requirements. d, the above inspection meets the requirements, add packing at the shaft seal at both ends of the pump, pay attention to the relative position of the packing rings in the packing room. 2, the pump disassembly a, disassembly to be carried out in the reverse order with the assembly, demolition should be strictly protected parts manufacturing accuracy from damage. b, remove the wear bar should be the first cushion with the middle pad, so as not to loosen the middle of the stop after the shaft bending. Boiler feed pump, DG type horizontal single-suction multi-stage centrifugal pump for the transport of water and physical and chemical properties similar to the water used in water. Changsha pump Pentium The pump DG25-80, DG45-80, DG85-80, DG150-100 four models; flow of 25-150m3 / h, head up to 480-1100 meters. Can be transported below 280 ℃ high temperature water, suitable for boiler feed water, factories and urban water use.
Door Hinges look like very simple door accessory, but actually has had very strict requests during the manufacturings. Simply judging from basement of quality approval, there are some difference from the manufacturing technology, which could not be told by untrained eye. We can be your best choice if you find anything not understood for Hinges . We have a large range of door hinges, including: Butt hinges, Gate Hinges, Concealed Hinges, Glass & Shower Room Door Hinges, Hinges for Wooden & Metal Doors, Hinges for Furniture & Wardrode etc.
Should you have any further demands, please feel free to contact us any time. And welcome for OEM products with detailed technical drawings.
Door Hinges
Shower Room Door Hinges,Hinges For Metal Doors,Hinges For Wooden Doors,Brass Butt Hinges
Greatwall Hardware International Limited , http://www.greatwall-hardware.com